Skip to main content

Full text of "Datasheet: Panel Mitsubishi AA121XN11 CE 01 0"

See other formats


@ Global LCD Panel Exchange Center 


www.panelook. com 




TENTATIVE 

All information in this technical data sheet is tentative 
and subject to change without notice. 


Preliminary 


12.1” XGA 


TECHNICAL SPECIFICATION 
Sample Product Name : AA121XN11-CE-01 

MITSUBISHI ELECTRIC Corp. 


Date: Aug.8/12 


MITSUBISHI Confidential ( 1 / 29 ) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




CONTENTS 


No. 

Item 

Page 

-- 

COVER 

1 

-- 

CONTENTS 

2 

1 

APPLICATION 

3 

2 

OVERVIEW 

4 

3 

ABSOLUTE MAXIMUM RATINGS 

5 

4 

ELECTRICAL CHARACTERISTICS 

5, 6, 7, 8 

5 

INTERFACE PIN CONNECTION 

9, 10, 11, 12 

6 

INTERFACE TIMING 

13, 14, 15, 16, 17 

7 

BLOCK DIAGRAM 

18 

8 

MECHANICAL SPECIFICATION 

19, 20, 21 

9 

OPTICAL CHARACTERISTICS 

22, 23, 24 

10 

RELIABILITY TEST CONDITION 

25 

11 

OTHER FEATURE 

26 

12 

HANDLING PRECAUTIONS FOR TFT-LCD MODULE 

27, 28, 29 


MITSUBISHI Confidential (2/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




1. APPLICATION 

This specification applies to color TFT-LCD module, AA121XN11-CE-01. 

These specification papers are the proprietary product of Mitsubishi Electric Corporation 
("MITSUBISHI) and include materials protected under copyright of MITSUBISHI. No part of this 
document may be reproduced in any form or by any means without the express written permission 
of MITSUBISHI. 

MITSUBISHI does not assume any liability for infringement of patents, copyrights or other 
intellectual property rights of third parties by or arising from use of a product specified in this 
document. No license, express, implied or otherwise, is granted under any patents, copyrights or 
other intellectual property rights of MITSUBISHI or of others. 

MITSUBISHI classifies the usage of the TFT-LCD module as follows. Please confirm the usage 
before usi ng the product. 

(1) Standard Usage 

Computers, office equipment, factory automation equipment, test and measurement 
equipment, communications, transportation equipment(automobiles, ships, trains, etc.), 
provided, however, that operation is not influenced by TFT-LCD directly. 

(2) Special Usage 

Medical equipment, safety equipment, transportation equipment, provided, however, that 
TFT-LCD is necessary to its operation. 

(3) Specific Usage 

Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control 
systems, life support systems and any other equipment. MITSUBISHI should make a 
contract that stipulate apportionment of responsibilities between MITSUBISHI and our 
customer. 

The product specified in this document is designed for "Standard Usage" unless otherwise specified 
in this document. If customers intend to use the product for applications other than those specified 
for "Standard Usage", they should first contact MITSUBISHI sales representative for it's intended 
use in writing. 

MITSUBISHI has been making continuous effort to improve the reliability of its products. 
Customers should implement sufficient reliability design of their application equipments such as 
redundant system design, fail-safe functions, anti-failure features. 

M ITSUBI SHI assumes no responsibility for any damage resulting from the use of the product that 
does not comply with the instructions and the precautions specified in this document. 

Please contact and consult a MITSUBISHI sales representative for any questions regarding this 
product. 


MITSUBISHI Confidential (3/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




2. OVERVIEW 

AA121XN11-CE-01 is 12.1" color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module 
composed of LCD panel, driver ICs, control circuit, backlight unit, touch panel, and cover glass. 

By applying 6 bit or 8 bit digital data, 1024 x 768, 262k-color or 16.7M-color images are displayed 
on the 12.1" diagonal screen. I nput power voltage is single 3.3 V for LCD driving. 

The type of data and control signals are digital and transmitted via LVDS interface per Typ. 65 
M H z cl ock cycl e. 

Driver circuit for LED backlight is not included in this module. General specifications are 
summarized in the foil owing table: 


ITEM 

SPECIFICATION 

Display Area (mm) 

245.76(H) x 184. 32 (V) 
(12.1-inch diagonal) 

Number of Dots 

1024 x 3 (H ) x 768 (V) 

Pixel Pitch (mm) 

0.240(H) x 0.240 (V) 

Color Pixel Arrangement 

RGB vertical stripe 

Display Mode 

Normally white 

Number of Color 

262k(6 bit/color), 16.7M(8 bit/color) 

Luminance (cd/m 2 ) 

(1100) 

Viewing Angle (CR > 10) 

(-80-80°) (H), (-80-60°) (V) 

Cover glass 

Surface T reatment 

Anti-reflection 

Thickness (mm) 

1.8 

Glass Type 

Strengthened glass 

Electrical Interface 

LVDS (6 bit/8 bit) 

Viewing Direction 

Higher Contrast ratio: 6 o'clock 
Less gray scale reversal: 12 o'clock 

Module Size (mm) 

281.8 (W) x 220.8 (H ) x 14.4 (D) 

Module Mass (g) 

(1150) 

Backlight Unit 

LED, edge-light, Unreplaceable 

Touch Panel 

Projective capacitive 

Touch Panel Interface 

UART /USB *1) 


Characteristic value without any note is typical value. 


*1) UART: Universal Asynchronous Receiver Transmitter 
UART and USB are used exclusively. 


MITSUBISHI Confidential (4/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




3. ABSOLUTE MAXIMUM RATINGS 


ITEM 

SYMBOL 

MIN. 

MAX. 

UNIT 

Power Supply Voltage for LCD 

VCC 

-0.3 

4.0 

V 

Logic 1 nput Voltage 

VI 

-0.3 

VCC+0.3 

V 

Backlight (LED) Current 

IF 

0 

180 

mA 

Touch Panel Voltage 

VDD5 

0 

6.0 

V 

Touch Panel Input Voltage 

VItp 

-0.3 

VDD5+0.3 

V 

Operation Temperature (Touch Panel) Note 1,2) 

T op(TouchPanel) 

-20 

70 

°C 

Operation Temperature (Ambient) Note2 > 

T op(Ambient) 

-20 

70 

°C 

Storage Temperature Note2 > 

T stg 

-20 

80 

°C 


[Note] 

1) M easured at the center of active area and at the center of panel back surface 

2) Top,Tstg< 40°C : 90%RH max. without condensation 


Top,Tstg >40°C : Absolute humidity shall be less than the value of 90%RH at 40°C without 
condensation. 


4. ELECTRICAL CHARACTERISTICS 

(1) TFT-LCD 


Ambient tempera 


ture: Ta =25°C 


ITEM 

SYMBOL 

MIN. 

TYP. 

MAX. 

UNIT 

Remarks 

Power Supply Voltages for LCD 

VCC 

3.0 

3.3 

3.6 

V 

*1) 

Power Supply Currents for LCD 

ICC 

-- 

(380) 

(720) 

mA 

*2) 

Permissive 1 nput Ripple Voltage 

VRP 

-- 

-- 

100 

mVp-p 

VCC=f3.3V 

Logic 1 nput Voltage 

High 

VI H 

0.8xVCC 

-- 

VCC 

V 

MODE, SC 

Low 

VIL 

0 

-- 

0.2xVCC 

V 

MODE, SC 


*1) Power and signals sequence: 

0.1 ms< tl < 10 ms 
0 <t2 < 50ms 
0 <t3 < 50ms 


200ms < t4 
200ms < t5 
0 < t6 


VCC 



data: RGB DATA, DCLK, DENA, MODE, SC 


MITSUBISHI Confidential (5/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




VCC-dip conditions: 

1) When 2.6 V < VCC < 3.0 V, td < 10 ms 

2) When VCC <2.6 V 

VCC-dip conditions should also follow the power and signals sequence. 



*2) VCC = +3.3 V , f H =48.4 kH z, fv = 60 H z, fci_K = 65 M H z 
Display image at typical power supply current value is 256-gray-bar pattern (8 bit), 768 line mode. 


*3) Fuse 


Parameter 

Fuse Type Name 

Supplier 

Remark 

VCC 

FCC16162AB 

Kamaya Electric Co., Ltd. 

*) 


*) The power supply capacity should be designed to be more than the fusing current. 


(2) Backlight 


ITEM 

SYMBOL 

MIN. 

TYP. 

MAX. 

UNIT 

Remarks 

LED Voltage 

VF 

- 

(18) 

(21.6) 

V 

IF =120 mA, Ta =25°C, *2) 

- 

- 

(22.2) 

V 

IF =120 mA, Ta =0°C 

- 

- 

(22.6) 

V 

IF =120 mA, Ta =-20°C 

LED Current 

IF 

- 

(120) 

(130) 

mA 

T a =25°C, *1), *3) 

LED Life Time 

LT 

80,000 

100,000 

- 

h 

IF =120 mA, Ta =25°C 
*4), *5), Continuous operation 


[N ote] 

*1) Constant Current Drive 

*2) The Voltage deviation between strings: | VfMAx - VfMm| < 2 V 
*3) LED Current measurement method: 



*4) LED lifetime is defined as the time when the brightness becomes 50% of the initial value. 

*5) The life time of the backlight depends on the ambient temperature. The lifetime will decrease 
under high temperature. 

MITSUBISHI Confidential (6/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




(3) Touch Panel 


Electrical Characteristics Ambient temperature: Ta = 25°C 


ITEM 

SYMBOL 

MIN. 

TYP. 

MAX. 

UNIT 

Remarks 

Touch Panel Voltage 

VDD5 

(4.5) 

5.0 

(5.5) 

V 

*1) 

Touch Panel Current 

ICCtp 

- 

(50) 

(200) 

mA 


Permissive 1 nput 
Ripple Voltage 

VRPtp 

- 

- 

100 

mVp-p 

VDD5 =+5.0 V 
*2) 

Logic 1 nput Voltage 

High 

VIHtp 

(0.8xVDD5) 

- 

VDD5 

V 

*3) 

CKW 

SC 

DIN 

RESET 

Low 

VILtp 

0 

- 

(0.2xVDD5) 

V 

Logic Output Current 

High 

IOH 

(-5.0) 

- 

0 

mA 

Low 

IOL 

0 

- 

(5) 

mA 

Multi-Touch Points 


- 

2 

- 

poi nt 


Position Accuracy 

AEx 

AEy 

(-3) 

- 

(3) 

mm 

1 nner area*4) 

(-4.5) 

- 

(4.5) 

mm 

Outer frame*4) 

Position Coordinate 
Output Rate (standard) 

- 

- 

(100) 

- 

sps 

Single touch 
*5) 

- 

- 

(60) 

- 

Dual touch 

Dual Touch Detection Distance 

Adx 

Ady 

(40) 

- 

- 

mm 

*4) 


*1) Power and signals sequence: 

0.1 ms<tl< 10 ms (200)ms<t4 

0 <t2 < 50 ms (2000) ms < t5 

0<t3<50ms 0<t6 


VDD5 



Initialization of touch panel controller (calibration of touch panel) is carried out during period 
between power supply turning on and start of touch panel operation (tl-H:2-H:5), therefore please do 
not touch surface with finger, hold hands near touch surface, nor put conductive material like 
metal on touch panel. 

If the calibration is not able to be carried out successfully at the initialization process, touch panel 
may not work properly for sometime. 

*2) Ripple noise of touch panel power supply affects stability of touch detection and position accuracy. 
Therefore please use stabilized power supply to touch panel. 

*3) Applied to CKW(2pin),SC(3pin),DI N(5pin),RESET(9pin). 

For, please input signal of USB2.0 compliance to D- (lOpin) & D+ (llpin). 


MITSUBISHI Confidential (7/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




*4) Area of thefinger touch is based on 10 mm in diameter. 

Linearity is written as the difference of an actual touch position and the position coordinate which 
a touch controller outputs as an error (AEx and AEy stand for error length in the direction of X, Y, 
respectively). Dual-point touch detection distance is shown in following figure. 

The coordinates accuracy of peripheral part is valid when one-point touched. 


Outer frame (hatched linearea) 



8mm 


*5) The time interval of touch position coordinate output under an initial parameter condition 
*6) F use 


Parameter 

F use Type Name 

Supplier 

Remark 

VCC 

FCC16501AB 

Kamaya Electric Co., Ltd. 

*) 


K ) The power supply capacity should be designed to be more than the fusing current. 


MITSUBISHI Confidential (8/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




5. INTERFACE PIN CONNECTION 


(1)CN KINTERFACE SIGNAL) 


Used connector: 20186-020E-11F (l-PEX) or FI-SEB20P-H FE (JAE) 


Corresponding connector: 20197-*20U-F (l-PEX) or FI-S20S, FI-SE20ME (J AE) 


Pin 

Symbol 

Function (ISP 6 bit compatibility mode) 

Function (ISP 8 bit 

No. 

6 bit input 

8 bit input 

compatibility mode) 

1 

VCC 

+3.3 V Power supply 

<— 

2 

VCC 

+3.3 V Power supply 

<- 

3 

GND 

GND 

<— 

4 

GND 

GND 

<- 

5 

Link 0- 

R0, Rl, R2, R3, R4, R5, GO 

R2, R3, R4, R5, R6, R7, G2 

R0, Rl, R2, R3, R4, R5, GO 

6 

Link 0+ 

R0, Rl, R2, R3, R4, R5, GO 

R2, R3, R4, R5, R6, R7, G2 

R0, Rl, R2, R3, R4, R5, GO 

7 

GND 

GND 

<- 

8 

Link 1- 

Gl, G2, G3, G4, G5, B0, B1 

G3, G4, G5, G6, G7, B2, B3 

Gl, G2, G3, G4, G5, B0, B1 

9 

Link 1+ 

Gl, G2, G3, G4, G5, B0, B1 

G3, G4, G5, G6, G7, B2, B3 

Gl, G2, G3, G4, G5, B0, B1 

10 

GND 

GND 

<- 

11 

Link 2- 

B2, B3, B4, B5, DENA 

B4, B5, B6, B7, DENA 

B2, B3, B4, B5, DENA 

12 

Link 2+ 

B2, B3, B4, B5, DENA 

B4, B5, B6, B7, DENA 

B2, B3, B4, B5, DENA 

13 

GND 

GND 

<- 

14 

CLKIN- 

Clock - 

<— 

15 

CLKIN + 

Clock + 

<- 

16 

GND 

GND 

<— 

17 

Link3- 

See: *2) 

R0, Rl, GO, Gl, B0, B1 

R6, R7, G6, G7, B6, B7 

18 

Link3+ 

See: *2) 

R0, Rl, GO, Gl, B0, B1 

R6, R7, G6, G7, B6, B7 

19 

MODE 

Low=ISP 6 bit compatibility mode 

HighHSP 

8 bit compatibility mode 

20 

SC 

Scan direction control. ( Low : Normal , High : Reverse) 

<— 

*1) M 

etal frame is connected to signal GND. 


*2) Recommended wiring of Pin 17,18 (6 bit input) 


LVDS 

transmitter 


.w LOW data 

2DOOC 


Pin 17 
Pin 18 


or 


vcc 

I 680 Q 


620 Q 


Pin 17 
Pin 18 


MITSUBISHI Confidential 


(9/29) 


AA121XN11-CE-01 02 00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




(2)CN 2(BACKLIGHT) 


Backlight-side connector: SM10B-SHLS-TF (LF)(SN) (J ST) 
Corresponding connector: SFILP-10V-S-B (J ST) 


Pin No. 

Symbol 

Function 

1 

NC 

This pin should be open. 

2 

NC 

This pin should be open. 

3 

LED C 1 

LED cathode 1 

4 

LED A 1 

LED anode 1 

5 

LED A 2 

LED anode 2 

6 

LED C 2 

LED cathode 2 

7 

LED C 3 

LED cathode 3 

8 

LED A 3 

LED anode 3 

9 

LED A4 

LED anode 4 

10 

LED C 4 

LED cathode 4 


(3) CN3 (Touch Panel Interface) 

Used connector: SM12B-SHLS-TF(LF)(SN) (J ST) 
Corresponding connector: SFILP-12V-S-B (J ST) 


Pin 

Symbol 

Function 

Connection to host equipment *4) 

No. 

UART 

USB 

1 

VDD5 

Touch panel power supply(5V) 

Power supply 5V 

NC 

2 

CKW 

Rotation of coordinate (Clockwise) *3) 

CKW 

CKW 

3 

SC 

Reverse of coordi nate *3) 

SC 

SC 

4 

GND 

Touch panel controller GND 

GND 

GND 

5 

DIN 

U ARTreceive (H :5V, L:0V) *1) 

DIN 

NC 

6 

DOUT 

U ART send (H :5V, L :0V) *1) 

DOUT 

NC 

7 

TEST1 

(Internal use) *2) 

NC 

NC 

8 

TEST2 

(Internal use) *2) 

NC 

NC 

9 

RESET 

Touch panel reset (H:5V, L:0V) 

RESET 

RESET 

10 

D- 

USB D-Terminal 

NC 

D- 

11 

D+ 

USB D+Terminal 

NC 

D+ 

12 

VUSB 

(VBUS) 

USB power supply (5V) 

NC 

Power supply 5V 

*1 

Direction of signal; 


DIN (5pin): FI ost equipments Touch panel controller 
DOUT (6pin): Controller -> FI ost equipment 

*2) Please don't useTESTl (7pin) and TEST2(8pin) because they are for internal use only. 


MITSUBISHI Confidential (10/29) 


AA121XN11-CE-01 02 00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




*3) CKW and SC are signals to change zero point of touch panel position coordinate. 
I f they are not connected, Position Coordinate is Default condition. 


Signal(H:5V,L:0V) 


CKW 


SC 


Position Coordinate (Zero point) 


( 0 , 0 ) 




LCD 

Normal Scan 

(4095,4095) 


JJ 


Y ■*- 

( 0 , 0 ) 

LCD 

Normal Scan 


(4095,4095) 


(4095,4095) 




LCD 

Normal Scan 
( 0 , 0 ) . 


X •«- 



(4095,4095) 

4 

LCD 

Normal Scan 

„ (0,0) 



-► Y 


Note 


Default condition 
*3) 


*4) UART and USB communication are exclusive and connection methods are different. 
NC should be open. 


Specification of communication between the controller and host are shown below. 
Communication Specification 


Item 

Specifications 

Communication method 

UART 

Communication speed 

38400bps 

Data length 

8 bit 

Stop bit 

1 bit 

parity 

None 


MITSUBISHI Confidential (11/29) 


AA121XN11-CE-01 02 00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




(4) ISP data mapping 

a. ISP 6 bit compatibility mode(6 bit input) 


CLKIN+/- j 


\ 

\ 


/ 

/ 

1CLK 
















P: 

LinkO+/- XX) 

GO 

GO 

GO 

GO 

GO 

GOC 

jDC 


XIIXIIXOIXOOGDGDGDGDGDCIX 
L| n t 2+/- XIIXIOCGGIIXIOGDGDGDGDCG 

b. ISP 6 bit compatibility mode(8 bit input) 


CLKIN+/- ^ 


\ 

\ 


/ 

/ 

1CLK 
















Pj 

r 

1 

o 

+ 

>< 

X 

GO 

GO 

GO 

GO 

GO 

GO( 

rO( 


l “ +/ - x x x-gtggo^x^x^og-x x 

Lmt2+ '- XZIXZZ)(^iXZIXZIX]ZXZXZX3DCZX 
L “ + '- XIIXIIXZIXODGDGDGDGEXjG)^^ 

c. I S P 8 bi t compati bi I i ty mode 


CLKIN+/- j 


\ 

\ 


i 

1CLK 
















P; 

X 

>< 

+ 

0 

1 
3 

GO 

GO 

GO 

GO 

GO 

GO( 

O 

x; 


unkw- XIOGOGDGDGDGDGDGDGDGO( 
Lmt2+ '- XZZXZZXfEEXZZXZZX^XZXZXZDCZX 
LiDk3+ '- XIOGOGOGDGDGDGDGDGDGO( 


MITSUBISHI Confidential (12/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




6. INTERFACE TIMING 

LVDS transmitter input signal 
(1) Timing Specifications 


ITEM 

SYMBOL 

MIN. 

TYP. 

MAX. 

UNIT 

DCLK 

F requency 

fCLK 

50 

65 

80 

MHz 

Period 

tCLK 

12.5 

15.4 

20 

ns 

DENA 

Florizontal 

Active Time 

tHA 

1024 

1024 

1024 

tCLK 

BlankingTime 

tHB 

30 

320 

-- 

tCLK 

Frequency 

f H 

42.4 

48.4 

60 

kHz 

Period 

tH 

16.6 

20.7 

23.6 

|uS 

Vertical 

Active Time 

r— 1- 

< 

> 

768 

768 

768 

tH 

BlankingTime 

ft 

< 

CD 

3 

38 

-- 

tH 

Frequency 

fv 

55 

60 

75 

Hz 

Period 

tv 

13.3 

16.7 

18.2 

ms 


[Note] 

1) DENA (Data Enable) should always be positive polarity as shown in thetiming specification. 

2) DCLK should appear during all invalid period. 

3) LVDS timing follows thetiming specifications of LVDS receiver iC: THC63LVDF84B(Thine). 

4) In case of blanking time fluctuation, please satisfy following condition. 

tvBn > tvBn-1 — 3(tH ) 


MITSUBISHI Confidential (13/29) 


AA121XN11-CE-01 02 00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




(2) Timing Chart 


a. Horizontal Timing Chart 


DCLK 

DATA 

(R,G,B) 

DENA 


jiJwinnttJWLnnnjir 

i 


P i ret- Hsta 


Last Data 



I nvalid Data ¥ 1 ¥ 2 Y 3 


thj B 

4 *• 



tHA 



t H =l/f H 


b. Vertical Timing Chart 



MITSUBISHI Confidential (14/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 




@ Global LCD Panel Exchange Center 


www.panelook. com 




(3) Color Data Assignment 
a. 6 bit input 


COLOR 

INPUT DATA 

R DATA 

G DATA 

B DATA 

R5 

R4 

R3 

R2 

R1 

R0 

G5 

G4 

G3 

G2 

G1 

GO 

B5 

B4 B3 B2 

B1 

BO 

MSB 





LSB 

MSB 





LSB 

MSB 

| i 


LSB 

BASIC 

COLOR 

BLACK 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

o 

o 

o 

0 

0 

RED(63) 

1 

1 

1 

1 

1 

1 

0 

0 

0 

0 

0 

0 

0 

o 

o 

o 

0 

0 

GREEN(63) 

0 

0 

0 

0 

0 

0 

1 

1 

1 

1 

1 

1 

0 

o 

o 

o 

0 

0 

BLUE (63) 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

1 

1 

1 ! 1 

1 

1 

CYAN 

0 

0 

0 

0 

0 

0 

1 

1 

1 

1 

1 

1 

1 

1 

1 \ 1 

1 

1 

MAGENTA 

1 

1 

1 

1 

1 

1 

0 

0 

0 

0 

0 

0 

1 

111 

1 

1 

YELLOW 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

0 

0 

o 

o 

0 

0 

WHITE 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 1 

1 

1 

RED 

RED(l) 

0 

0 

0 

0 

0 

1 

0 

0 

0 

0 

0 

0 

0 

0 

o 

o 

0 

0 

RED(2) 

0 

0 

0 

0 

1 

0 

0 

0 

0 

0 

0 

0 

0 

0 

o 

o 

0 

0 
















! 





















RED(62) 

1 

1 

1 

1 

1 

0 

0 

0 

0 

0 

0 

0 

0 

0 

o 

o 

0 

0 

RED(63) 

1 

1 

1 

1 

1 

1 

0 

0 

0 

0 

0 

0 

0 

0 

0 0 

0 

0 

GREEN 

GREEN(l) 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

1 

0 

0 

o 

o 

0 

0 

GREEN(2) 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

1 

0 

0 

0 

o 

o 

0 

0 
















1 


















1 



GREEN(62) 

0 

0 

0 

0 

0 

0 

1 

1 

1 

1 

1 

0 

0 

0 

o 

o 

0 

0 

GREEN(63) 

0 

0 

0 

0 

0 

0 

1 

1 

1 

1 

1 

1 

0 

0 

o 

o 

0 

0 

BLUE 

BLUE(l) 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

o 

o 

0 

1 

BLUE (2) 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

o 

o 

1 

0 


































j 



BLUE (62) 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

1 

1 

1 1 1 

1 

0 

BLUE (63) 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

0 

1 

1 

1 1 

1 

1 


[N ote] 


1) Definition of gray scale 

Color (n) — n indicates gray scale level. 

Higher n means brighter level. 

2) Data 

l:High, 0: Low 


MITSUBISHI Confidential (15/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




b. 8 bit input 


COLOR 


INPUT DATA 


R DATA 


R7 R6 R5 R4 R3 R2 R1 RO 


MSB 


LSB 


G DATA 


G7 G6 G5 G4 G3 G2 G1 GO 


MSB 


LSB 


B DATA 


B7 B6 B5 B4 B3 B2 B1 BO 


MSB 


LSB 


BASIC 

COLOR 


BLACK 


RE D(255) 
GREEN(255) 


BLUE(255) 


CYAN 

MAGENTA 


YELLOW 


0 jOjOj OjOjOjOj 0 

1 lllllllllllll 1 


0 0000000 


0 000000 0 


0 0 


0 

0 

1 


0 0 


0 0 
0 0 


0 


0 


0 


0 


0 


0 

1 

0 


0 


111111 1 
111111 1 


1 

0 

1 


0 0 


0 0 


0 


0 


0 0 0 


0 000000 0 


0 0 


0 


1 1 


1 1 


1 111111 1 


0 0 0 0 0 0 
11111 1 


1 111111 1 


0 000000 0 


WHITE 


1 111111 1 


1 111111 1 


1 111111 1 


RED(l) 


RE D(2) 


0 !0!0!0!0!0!0j 1 

o loioioioioiil o 


0 0000000 


0 000000 0 


RED 


0 0000000 


0 000000 0 


RE D(255) 


1 111111 1 


0 0000000 


0 000000 0 


GREEN(l) 

GREEN(2) 


0 0 


0 0 


0 0 
0 0 


0 0 0 0 


0 


0 0 0 0 


GREEN 


0 


0 0 0 0 0 1 


0 0 0 0 1 0 


0 

0 


0 


0 0 0 


0 0 0 


0 0 
0 0 


0 


GREEN(255) 


0 000000 0 


1 111111 1 


0 000000 0 


BLUE(l) 


0 000000 0 


BLUE(2) 


0 000000 0 


0 

0 


0:0!0|0|0j0j 0 

oloioioloiol o 


BLUE 


0 000000 1 


0 000001 0 


BLUE (255) 0 000000 0 0 000000 0 1 111111 1 


[N ote] 

1) Definition of gray scale 

Color (n) — n indicates gray scale level. 

Higher n means brighter level. 


2) Data 


l:High, 0: Low 


MITSUBISHI Confidential (16/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 


PIS © 


(4) Display Position and Scan Direction 


D(X,Y) shows the data number of input signal. 


SC: Low 


CN2 


D(l,l) 

> D(1024,l) 


> 


> 

D(l,768) 

— >D(1024,768) 


SC: High 


D(1024,768)< 

T D( 1,768) 

<— 1 


< 



D( 1024,1) < 

D(l,l) 


MITSUBISHI Confidential (17/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




7. BLOCK DIAGRAM 




MITSUBISHI Confidential ( 18 / 29 ) 


AA121XN11-CE-01 02 00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




8. MECHANICAL SPECIFICATIONS 

(1) Front Side 


■0 




■45 

!n= 



MITSUBISHI Confidential ( 19 / 29 ) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 


PIS © 


(2) Rear Side 


JJ o 
CD cz 


o 

d +-> 

o 
CD C 


c c 
DEo 


< 

LU 

CC 

< 



E m- o 
ID © 
■ I— 

O LU o 
+ |Q_ L 
CL 

CD 4- 
— O © 

CD CD tXO 
O CD C 
C CD CO 
CO d 
^ TO 
© O C_ 

O C £ 

hhh 


^ CVJ 00 


LU 

< 


LU 

LL 


CL 

O 

C\J 

CD 

LU 

CD 


LL ~ ~ 
\— \~ 
© CD CD 
o — ■} 


x z z 
LU CD CD 
CL — - 


— LL LL 


- LL U_ 


LU CD CD 
O _l _J 
C VI X X 
O CD CD 

CD CD CD 
CO O CM 

o i i 

(\J CD CD 


^ C\J CD 
z z z 
uoo 


(Unit:mm) 


MITSUBISHI Confidential (20/29) 


AA121XN11-CE-01 02 00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




(3) Touch Panel Design Guide 

1) Operating Precautions 

- Please operate touch panel by finger. It does not sense by tip of nail. 

- Sensing is affected by how strongly touched (touched finger area), glove thickness (distance) 
and material. 

2) Assembly Precautions 

- Please connect touch panel controller GND to the earth ground. 

When there is no connection to the earth ground, please make bypass between touch panel 
controller GND and the earth ground to prevent noise. 

- Please use non-conductive material for customer side housing around touch panel. 

When conductive material is used for the housing, pi ease make space more than 2mm from 
touch panel surface, and also pi ease design the housing strong enough not to change its 
distance. Please design the housing to prevent electrical noise. (Ex. to connect to GND) 

- Please keep space between FPC and noise source like metal parts and signal cables. Please 
keep space more than 2mm from FPC and also design not to change its distance. 

- Please do not make an impact on the cover glass edge. 


MITSUBISHI Confidential 


(21/29) 


AA121XN11-CE-01 02 00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




9. OPTICAL CHARACTERISTICS 

Ta=25°C, VCC=3.3V, I nput Signals: Typ. values shown in Section 6 


ITEM 

SYMBOL 

CONDITION 

MIN 

TYP 

MAX 

UNIT 

Remarks 

Contrast Ratio 

CR 

0V=O°, 0H=O° 

(390) 

(600) 

- 

- 

*1)*2)*5) 

Luminance 

Lw 

0V=O°, 0H=O° 

(880) 

(1100) 

-- 

cd/m 2 

*1)*5) 

Luminance Uniformity 

ALw 

0V=O°, 0H=O° 

-- 

-- 

30 

% 

*1)*3)*5) 

Response Time 

tr 

0V=O°, 0H=O° 

-- 

(4) 

-- 

ms 

*1)*4)*5) 

tf 

0V=O°, 0H=O° 

-- 

(12) 

- 

ms 

*1)*4)*5) 

Viewing 

Angle 

Horizontal 

0H 

CR> 10 

(-65-65) 

(-80-80) 

- 

o 

*1)*5) 

Vertical 

0V 

(-65-45) 

(-80-60) 

- 

o 

*1)*5) 

1 mage sticking 

tis 

2 h 

-- 

-- 

2 

s 

*6) 

Color 

Coordinates 

Red 

Rx 

Ry 

0V=O°, 0H=O° 

(0.508) 

(0.299) 

(0.548) 

(0.339) 

(0.588) 

(0.379) 

-- 

*1)*5) 

Green 

Gx 

Gy 

(0.316) 

(0.522) 

(0.356) 

(0.562) 

(0.396) 

(0.602) 

Blue 

Bx 

By 

(0.124) 

(0.100) 

(0.164) 

(0.140) 

(0.204) 

(0.180) 

White 

Wx 

Wy 

(0.273) 

(0.289) 

(0.313) 

(0.329) 

(0.353) 

(0.369) 


[Note] 

These items are measured using EZContrast (ELDIM) for viewing angle and CS2000 (Minolta) or 
equivalent equipment for others under the dark room condition (no ambient light) after more than 
30 minutes from turning on the backlight unless noted. 


Condition: IF =(120) mA 

Measurement method for luminance and color coordinates is as follows. 


9=1° (Field) 



TFT-LCD module 


500 mm 

◄ 


> 


The luminance is measured according to FLAT PANEL DISPLAY MEASUREMENTS STANDARD 
(VESA Standard). 


MITSUBISHI Confidential (22/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




*1) Measurement Point 

Contrast Ratio, Luminance, ResponseTime, Viewing Angle, Color Coordinates: Display Center 
Luminance Uniformity: point 1~5 shown in a figure below 



*2) Definition of Contrast Ratio 

CR=Lumi nance with all white pixels/ Luminance with all black pixels 


*3) Definition of Luminance Uniformity 
ALw={Lw(MAX)/Lw(MIN)-l]x 100 


*4) Definition of ResponseTime 

White 


Luminance 



"5) Definition of Viewing Angle(0v, 9h) 


Normal Axis 



- Right (+) 


MITSUBISHI Confidential (23/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




*6) I mage sticking: 

Continuously display the test pattern shown in the figure below for two-hours. Then display a 
completely white screen. The previous image shall not persist more than two seconds at 25°C. 


Cds 510-514 ■ 


Rows 382-386 : 




: White 
: Area 



A 

: Black : 
: Lines : 



TEST PATTERN FOR IMAGE STICKING TEST 


MITSUBISHI Confidential (24/29) 


AA121XN11-CE-01 02 00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




10. RELIABILITY TEST CONDITION 

(1) Temperature and Humidity 



(4) j udgment standard 

Thejudgment of the above tests should be made as follow: 

a. TFT-LCD 

Pass: Normal display image, no damage of the display function, (ex. no line defect) 

Partial transformation of the module parts should be ignored. 

Fail: No display image, damage of the display function, (ex. line defect) 

b. Touch Panel 

Pass: No damage of the touch function, (ex. touch detection cannot be performed.) 

Fail: Touch panel is damaged, (ex. Touch panel does not work, or touch detection cannot be 
performed.) 


MITSUBISHI Confidential (25/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




11. OTHER FEATURE 

This LCD module complies with RoHS*> directive. 

*> RoHS: Restriction of the use of certain hazardous substances in electrical and electronic 
equipment 

U L 1950 certified (UL File#E 158720) 


MITSUBISHI Confidential (26/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




12. HANDLING PRECAUTIONS FOR TFT-LCD MODULE 

Please pay attention to the followings in handling TFT-LCD products; 

(1) ASSEMBLY PRECAUTION 

a. Please mount the LCD module by using mounting hole with a screw clamping torque less than 
0.5 Nm. Please do not bend or wrench the LCD module in assembling. Please do not drop, 
bend or twist the LCD module in handling. 

b. Please design display housing in accordance with thefollowing guidelines. 

(a) Housing case must be designed carefully so as not to put stress on LCD and not to wrench 
module. If customer uses compression mounting, please evaluate housing case with LCD 
carefully to avoid image quality issue caused by mechanical stress. 

(b) Under high temperature environment, performance and life time of LED may heavily 
shorten. When you design with our LCD product, please consider radiating heat and 
ventilation for good heat management. 

(c) Keep sufficient clearance between LCD module back surface and housing when the LCD 
module is mounted. Approximately 1.0mm of the clearance in the design is recommended 
taking into account the tolerance of LCD module thickness and mounting structure height 
on the housing. 

(d) When some parts, such as, FPC cable and ferrite plate, are installed underneath the LCD 
module, still sufficient clearance is required, such as 0.5mm. This clearance is, especially, to 
be reconsidered when the additional parts are implemented for EMI countermeasure. 

(e) Keep sufficient clearance between LCD module and the others parts, such as inverter and 
speaker so as not to interfere the LCD module. Approximately 1.0 mm of the clearance in 
the design is recommended. 

(f) To avoid local elevation/decrease of temperature, considering location of heating element, 
heat release, thermal design should be done. 

c. Please do not push or scratch touch panel surface with anything hard. And do not soil LCD 
panel surface by touching with bare hands. 

d. Do not use or store the product under a condition where the product will be exposed to water, 
organic solution or acid. 

e. Please wipe off touch panel surface with absorbent cotton or soft cloth in case of it being soiled. 

f. Touch panel glass edge is not rounded. PI ease take care in handling to avoid injury. 

g. Please do not take a LCD module to pieces and reconstruct it. Resolving and reconstructing 
modules may cause them not to work well. 

h. Please do not touch metal frames with bare hands and soiled gloves. A color change of the 
metal frames can happen during a long preservation of soiled LCD modules. 

i. Please handle metal frame carefully because edge of metal frame is very sharp. 

j. Please connect the metal frame of LCD module to GND in order to minimize the effect of 
external noi se and E M I . 

MITSUBISHI Confidential (27/29) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




k. Besureto connect the cables and the connecters correctly. 

(2) OPERATING PRECAUTIONS 

a. Please be sure to turn off the power supply before connecting and disconnecting signal input 
cable. 

b. Please do not change variable resistance settings in LCD module. They are adjusted to the 
most suitable value. If they are changed, it might happen LCD does not satisfy the 
characteristics specification. 

c. The interface signal speed is very high. Please pay attention to transmission line design and 
other high speed signal precautions to satisfy signal specification. 

d. Condensation might happen on the surface and inside of LCD module in case of sudden change 
of ambient temperature. Do not use touch panel when there is condensation. It could cause 
touch panel failure. 

e. Please pay attention not to display the same pattern for very long time. I mage sticking might 
happen on LCD. Although image sticking may disappear as the operation time proceeds, 
screen saver function is recommended not to cause image sticking. 

f. PI ease obey the same safe instructions as ones being prepared for ordinary electronic products. 

(3) PRECAUTIONS WITH ELECTROSTATICS 

a. This LCD module use CMOS-IC on circuit board and TFT-LCD panel, and so it is easy to be 
affected by electrostatics. Please be careful with electrostatics by the way of your body 
connecting to the ground and so on. 

b. Please remove protection film very slowly from the surface of touch panel to prevent from 
electrostatics occurrence. 

(4) STORAGE PRECAUTIONS 

LCD should be stored in the room temperature environment with normal humidity. The LCD 

inventory should be processed by first-in first-out method. 

(5) SAFETY PRECAUTIONS 

a. When you waste damaged or unnecessary LCDs, it is recommended to crush LCDs into pieces 
and wash them off with solvents such as acetone and ethanol, which should later be burned. 

b. If any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash off 
thoroughly with soap and water. 


MITSUBISHI Confidential ( 28 / 29 ) AA121XN11-CE-01_02_00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com 



@ Global LCD Panel Exchange Center 


www.panelook. com 




(6) OTHERS 

a. A strong incident light into LCD panel may cause deterioration to touch panel, polarizer film, 
color filter, and other materials, which will degrade the quality and performance of display. 
Please do not expose LCD module under strong Ultraviolet rays for a long time. If using under 
direct sunlight condition, pi ease test the reliability and performance completely. 

b. For the packaging box handling, please see and obey with the packaging specification 
datasheet. 


MITSUBISHI Confidential 


( 29 / 29 ) 


AA121XN11-CE-01 02 00 


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com