49
49
texts
eye 49
favorite 0
comment 0
radioshack audio 12897
Topics: theater, dvd, center, woofer
11
11
Jan 15, 2021
01/21
by
Tapani Hoikkaniemi (Funderaren)
data
eye 11
favorite 0
comment 0
This is my first attempt to make something serious. I followed the recommendations for a ported design from here: http://www.d-s-t.com.au/data/Peerless/Peerless_XLS_Subwoofer.pdf The front and rear baffle are mounted on a ~10" (actually 250 mm) sonotube with a length of 450mm or 17.71" Either print the front and rear baffles whole or use the chopped up sections. 6 sections per baffle. Assemble the baffle sections and mount the peerless xls10. Use six M8 or M10 threaded rods to put it...
Topics: thingiverse, Woofer, stl, XLS10, sub_woofer, XLS, Audio, 10_inch, peerless, subwoofer, sonotube,...
3
3.0
Mar 25, 2021
03/21
by
Dax 3DPrinter (Dax3dprint)
data
eye 3
favorite 0
comment 0
halo halo
Topics: stl, 3D Printing, Woofer, thingiverse
53
53
texts
eye 53
favorite 0
comment 0
radioshack audio 12965
Topics: theater, woofer, audio, active, sheet, system, view
3
3.0
Apr 8, 2021
04/21
by
Fabian S (ridanael)
data
eye 3
favorite 0
comment 0
A howling Labrador keychain. Consider using concentric top layer, this will give it a fur-ish look :) Also, don't mind the messed up finish in the pic, ironing went wrong with this one...
Topics: dog, Keychains, Woofer, retriever, stl, thingiverse, labrador
5
5.0
Mar 3, 2021
03/21
by
ulucan şimşek (ulucansimsek)
data
eye 5
favorite 0
comment 0
This parts printble. I shared video Comming soon
Topics: Woofer, Electronics, thingiverse, Speakers, stl, speaker
3
3.0
Jun 10, 2021
06/21
by
Harry Böttcher (HarryB)
data
eye 3
favorite 0
comment 0
Drop in Adapter to mount a reasonable 8" Sub into the Alfa Spider 916. Protection cover (Airbag control box) on the Bottom of the trunk needs to be removed. No worries it will be protected by the Sub. Invisible installation, all the original covers will still fit. Use 4 12mm/m5 screws to mount on the car and 4 16mm/m5 to mount the sub in the adapter Happy printing
Topics: Automotive, Woofer, speaker, adapter, thingiverse, stl
5
5.0
Mar 16, 2021
03/21
by
RAVI KANT (RAVI3D)
data
eye 5
favorite 0
comment 0
Hii Everyone today I show you how I make a 200watt powerfull amplifier. This amplifier give you 200watt audio output with 3.5mm audio input and bluetooth receiver, inbuilt cooling fan fully diy. I hope you like it thank you somuch have a Good Day! tools I used: Plywood- 10mm thickness 200watt 2.1 channel Amplifier board 220v to 24v DC converter I used15A 24v to 5v converter Bluetooth Receiver 24v Cooling Fan for testing:- 10" Subwoofer 100watt - https://youtu.be/WUJWeo--9Qg 2x 8"...
Topics: thingiverse, amplifier, woofer, sound, Audio, subwoofer, audio, stl
3
3.0
Jan 7, 2021
01/21
by
Sean Campbell (IronCanine)
data
eye 3
favorite 0
comment 0
So someone made a replacement for this bracket that I can no longer find (this is actually a remix). In my case, the bolt that this bracket attaches to on the trunk floor snapped off due to the rust (the original reason for the replacement bracket), so I decided to make a version that has just a free standing foot as opposed to the bolt hole. Print at 90% or better to be solid.
Topics: stl, sub woofer, Automotive, thingiverse, bracket, Jeep
10
10.0
Jan 18, 2021
01/21
by
Derek Tombrello (rebeltaz)
data
eye 10
favorite 0
comment 0
I purchased a pair of [Pyle PLMR24 speakers](https://www.amazon.com/gp/product/B001CXXDBM) from Amazon a little over a year ago. Despite the blatant lies in the description - [see my review for those here](https://www.amazon.com/gp/customer-reviews/R33C9DD1SL7Y7C) - the speakers sounded pretty good in my old pickup truck. Unfortunately, one of the speakers developed a bad connection that seems to be in the speaker itself. Rather than buy another set, I decided to use a set of speakers I had on...
Topics: pyle, Audio, tweeter, thingiverse, speaker, enclosure, stl, woofer
6
6.0
Mar 13, 2021
03/21
by
Marius C (mariusc46)
data
eye 6
favorite 0
comment 0
This is a decorative subwoofer model. If required scale both models with the same percentage.
Topics: thingiverse, Decor, woofer, sundown, mini subwoofer, speaker, stl, subwoofer
5
5.0
Mar 8, 2021
03/21
by
Daniel C (Electro_LIB)
data
eye 5
favorite 0
comment 0
universal gasket replacement for 10" Sub woofer
Topics: sub, gasket, stl, thingiverse, subwoofer, Audio, woofer, subaru, speaker
1
1.0
Apr 20, 2022
04/22
by
Carlo Hoffmann (KoeRt888)
data
eye 1
favorite 0
comment 0
Thanks [@guppyk](https://www.thingiverse.com/guppyk/designs) for the design. ATTENTION the .stl file here is not a part. It is only included to satisfy the Thingiverse file restriction, as 3mf files are not solely supported. I just adapted the mounting bracket, the box and the upper spacer to fit the Dayton DC130B-8 that I acquired from parts-express. The mounting bracket has the attachment holes for the speaker set outwards to accommodate the 133.2 mm diameter mounting pattern. Best are M4x35...
Topics: thingiverse, bass, speaker, subwoofer, isobaric, Woofer, stl, Music
0
0.0
Aug 13, 2022
08/22
by
Jake Johnson (Aarvix)
data
eye 0
favorite 0
comment 0
This is an adapter for replacing Kia Stinger door woofer with aftermarket driver. It is designed to work with Focal Flax 6.5 woofers, but should work with other speakers with the same or less mounting depth. The speaker is very close to the window, so I would not recommend anything deeper. Also included STEP file for those wanting to remix for different bolt circles.
Topics: focal, Woofer, kia, stl, audiophile, thingiverse, stinger, speaker, Audio
95
95
texts
eye 95
favorite 0
comment 0
radioshack audio 64922
Topics: radioshack, warranty, product, polypropylene, inches, tandy, cone, specifications, cuft, woofer
57
57
texts
eye 57
favorite 0
comment 0
radioshack audio 60137
Topics: center, surround, diagrams, connection, url, ironi, dat, woofer, downloaded
55
55
texts
eye 55
favorite 0
comment 0
radioshack auto 61237
Topics: mounting, radioshack, warranty, speaker, grille, product, tweeter, supplied, woofer, tandy
36
36
texts
eye 36
favorite 0
comment 0
radioshack auto 61241
Topics: radioshack, speaker, mounting, warranty, product, woofer, tandy, door, improper, tweeter
7
7.0
Jun 20, 2021
06/21
by
Hughe Chung (deltapenguin)
data
eye 7
favorite 0
comment 0
I have a pair of 20 years old Chario R100 loudspeakers. I heard weird sound from the left side. The woofer housing made out of plastic was broken, torn down rubber was holding it. I glued the broken housing but I though it would break again later on. I measured the bridge and created a support model that reinforces it. The support is the 3rd iteration. Each woofer has four bridges. So I printed eight supports and glued them with a silicon on both woofers. How much did I save from it? Priceless....
Topics: woofer, speaker, thingiverse, DIY, stl, repair, housing, chario R100
4
4.0
Apr 16, 2021
04/21
by
cyba digitals (cybadigitals)
data
eye 4
favorite 0
comment 0
This speaker box is made for dual 32mm drivers. It can be printed without supports.
Topics: speaker_box, thingiverse, speaker, stl, Music, mini_speaker, Woofer
67
67
texts
eye 67
favorite 0
comment 0
radioshack audio 64919
Topics: radioshack, warranty, product, woofer, polypropylene, cone, mounting, specifications, connect,...
7
7.0
Jan 8, 2021
01/21
by
Nikolay Gorbunov (catethysis)
data
eye 7
favorite 0
comment 0
A popular "Bluetooth back horn speaker" inspired remake. #Improvements I did some improvements from the original one. **Speakers** * **Tweeter**. You can't achieve good sound from the one loudspeaker, even if it broadband. Just split it into two bands, lower for the woofer and higher for the tweeter. * **Passive radiator**, which increases your woofer efficiency and helps it to play the very low frequencies. **Electronics** * **Touch buttons** to control the volume. * **Connectors...
Topics: sound, stl, speaker, amplifier, Loudspeaker, sub-woofer, thingiverse, tweeter, Audio
Topics: manualzz, manuals, YSM5 55w, 5-inch woofer, YSM5, Service manual, YORKVILLE
1
1.0
Apr 19, 2022
04/22
by
copernic nic (copernicnic)
data
eye 1
favorite 0
comment 0
adaptateur pour woofer 16cm pour Fiat ducato, Citroen jumper et Peugeot boxer
Topics: Peugeot_Boxer, thingiverse, Fiat_Ducato, Vehicles, Citroen_Jumper, Woofer, stl
51
51
texts
eye 51
favorite 0
comment 0
radioshack audio 64921
Topics: radioshack, warranty, product, polypropylene, tandy, cone, specifications, woofer, connect, limited
51
51
texts
eye 51
favorite 0
comment 0
radioshack audio 64920
Topics: radioshack, warranty, product, polypropylene, tandy, cone, specifications, woofer, connect, limited
6
6.0
Mar 2, 2021
03/21
by
Bill Waslo (bwaslo)
data
eye 6
favorite 0
comment 0
This is a (not yet tested) design for a 2-way high fidelity loudspeaker. Concept: Cabinet rigidity and avoidance of bass or midrange resonances is important for a loudspeaker, But thick, heavy cabinets aren't very practical for 3D printing(!), so this design uses a "matrix" structure inside to provide high overall rigidity and to move all vibrational modes to higher frequencies. A matrix structure is similar to 'infill' on a 3D print, but more sparse since enough internal air volume...
Topics: cabinet, Loudspeaker, thingiverse, stl, Speaker, tweeter, 2-way, Audio, woofer
6
6.0
May 1, 2021
05/21
by
Lauri Turunen (latunen)
data
eye 6
favorite 0
comment 0
I wanted to make a nice looking HiFi grade speaker that would cost under 100 euros including all parts and needed only 1 kg PLA to print. Of course with only 1 kg plastic the speaker cabinet would be way too light to work well. The best solution was to make the cabinet walls hollow and fill it with sand. I made several different prototypes and this SANDBOX 2.3 works best for several types of elements and reflex tube lengths. The full range element makes this speaker easy to assembly and no...
Topics: stl, Loudspeaker, tang, hexibox, Music, speaker, Woofer, Speakers, band, thingiverse, hifi
3
3.0
Apr 21, 2021
04/21
by
BuildXYZ (buildxyz)
data
eye 3
favorite 0
comment 0
This is a generic speaker grill set which can be used on 4" woofers and 1" tweeters. Follow me on Instagram to see all my latest projects! [https://www.instagram.com/buildxyz/](https://www.instagram.com/buildxyz/)
Topics: home_audio, thingiverse, speaker, audiophile, stl, grill, audio, Electronics, Woofer, hexagon
6
6.0
Apr 8, 2021
04/21
by
Rich Olson (nothinglabs)
data
eye 6
favorite 0
comment 0
More info and demo -Video- for this project at: http://nothinglabs.blogspot.com/2014/09/speakergen-parametric-3d-printed.html 3d print your own speaker enclosures! This OpenSCAD / Customizer script lets you: - Generate a box of any desired volume / ratio / wall thickness - Determine optimal sealed box size for any driver using Thiele / Small parameters (Qts, Vas and Fs) - Include cutouts for speaker / terminals (and screw holes) - Include a bass port of any dimensions With a wide variety of...
Topics: speakers, loudspeaker, subwoofer, woofer, Audio, stl, enclosure, stereo, thingiverse, customizer,...
generalmanual 000024592
Topics: puissance, subwoofer, woofer, les, cone, systeme, speaker, watts, ohms, une, speaker system
6
6.0
Mar 3, 2021
03/21
by
christian jørgensen (Chrisitan)
data
eye 6
favorite 0
comment 0
This is a 1:1 model of the beautifull B&W 800 D3 speaker. It would require a huge printer and a around 110 kg of plastic to print a pair of these with 100% infill. Its tuned to 20 Hz For the 10" 26W/8867T00 scanspeak woffer
Topics: hifi, subwoofer, Music, thingiverse, Speakers, stl, speaker, sub, sub-woofer, tower
7
7.0
Mar 2, 2021
03/21
by
Bill Waslo (bwaslo)
data
eye 7
favorite 0
comment 0
I was putting together a speaker cabinet for a friend and needed a pair of 1" diameter port tubes for tuning the vented box. They don't cost a lot to buy, but the shipping charges get pretty high! So, I tossed together this model on Fusion 360. It pressure mounts in a 1.25" (31mm) hole, and is designed at 5 inches long. You can use your slicer to scale the diameter(s) and length as needed to get other sizes. This printed so nicely that I'm looking at printing an entire small speaker...
Topics: thingiverse, stl, speaker, audio, loudspeaker, vent, Audio, Port, woofer, port_tube
Topics: manualzz, manuals, YSM6 68w, 6.5-inch woofer, Service manual, YORKVILLE, YSM6
8
8.0
Jan 15, 2021
01/21
by
Roman Vaque (Portalintec)
data
eye 8
favorite 0
comment 0
2¨ Minimalist SubWoofer Box This its a litrate sub speaker box design witch a Filaflex gaskets to prevent air leaks. Its a nice desktop gadget and complement to audio fidelity Assembled with 3x15mm Screws. Print on 0,2mm 35% infill for a PLA pieces Print on 0,1mm 100% infill for a FilaFlex gaskets Print on 0,2mm 100% infill for a FilaFlex feets ------------------------------------------------------------------------------------------------------------ Me sobraba un parlante y asi es cuando...
Topics: speaker, thingiverse, Woofer, box, stl, parlante_para_celula, Audio, caja, subwoofer
45
45
texts
eye 45
favorite 0
comment 0
radioshack audio 65789
Topics: crossover, radioshack, network, warranty, connect, product, tweeter, woofer, frequency, output,...
123
123
texts
eye 123
favorite 0
comment 0
radioshack audio 64937
Topics: speaker, radioshack, warranty, wire, product, tweeter, woofer, specifications, limited, positioned,...
48
48
texts
eye 48
favorite 0
comment 0
radioshack audio 64936
Topics: speaker, radioshack, warranty, wire, product, tweeter, woofer, specifications, limited, positioned,...
45
45
texts
eye 45
favorite 0
comment 0
radioshack auto 61852
Topics: shack, radio, speaker, tandy, speakers, warranties, tweeter, watts, warranty, woofer, radio shack,...
Weatherproof high fidelity speaker system model OH-10 from Oxford Transducer Corp.
Topics: woofer, weatherproof, sound, fidelity, corporation, designed, unmatched, drf, frequency, speaker,...
73
73
texts
eye 73
favorite 0
comment 0
radioshack audio 65827
Topics: speaker, radioshack, warranty, wire, product, tweeter, woofer, specifications, limited, positioned,...
2
2.0
Sep 13, 2021
09/21
by
ELECTRONOOBS ELECTRONOOBS (ELECTRONOOBS)
data
eye 2
favorite 0
comment 0
Full video tutorial here: https://youtu.be/ce_MVa1B9GU Hey guys. Today we are making yet another speaker project. But this time we have something different. These are portable speaker, wireless, with Bluetooth connection, but guess what, they are stereo. Sounds interesting? You get it? Sounds interesting, because it’s a speaker. Anyway, the fact that the speakers are stereo is the interesting part. Why? Well, usually, when you receive music with a Bluetooth receiver, you do have the left and...
Topics: homemade, stl, thingiverse, bass, subwoofer, bluetooth, speaker, audio, DIY, portable, Woofer,...
46
46
texts
eye 46
favorite 0
comment 0
radioshack audio 63317
Topics: speaker, radioshack, warranty, wire, product, tweeter, woofer, tandy, positioned, speaker wire,...
generalmanual 000040151
Topics: woofer, caisson, les, des, vous, pour, sur, grave, speaker, une, les enceintes, speaker terminals,...
66
66
texts
eye 66
favorite 0
comment 0
radioshack audio 64935
Topics: speaker, radioshack, warranty, wire, product, tweeter, woofer, specifications, limited, positioned,...
generalmanual 000070433
Topics: press, indicator, disc, remote, tape, mode, power, system, cassette, track, tape direction,...
38
38
texts
eye 38
favorite 0
comment 0
radioshack audio 63318
Topics: speaker, radioshack, warranty, wire, product, tweeter, woofer, tandy, positioned, distance, speaker...
38
38
texts
eye 38
favorite 0
comment 0
radioshack audio 64938
Topics: speaker, radioshack, warranty, wire, product, woofer, limited, positioned, distance, feet, speaker...
211
211
texts
eye 211
favorite 0
comment 0
Wiring Diagrams for Star Wars Racer Arcade Mini DX, an arcade game by Sega.
Topics: gnd, ooo, jst, \nArcade Manuals, Arcade\n, blka, agnd, woofer, jvs, cvj, transformer, meter
57
57
texts
eye 57
favorite 0
comment 0
radioshack audio 65787
Topics: crossover, radioshack, terminals, network, warranty, connect, frequency, tweeter, woofer, product,...
