10
10.0
Apr 24, 2021
04/21
by
Raheel Essa (raheeljessa)
data
eye 10
favorite 0
comment 0
I've got an AC digital voltmeter and I use it to see what voltage is coming from the mains as in my country we have a lot of fluctuation and irregular power which can cause damage to electronics and electrics. I decided to make a box for it which keeps the display at exactly 45 degrees from the normal to make it perfectly visible from the front and above and I wanted it to take less space than what the carpenter made for me. The box even has gaps for the voltmeters clips but its snug enough for...
Topics: LED_voltmeter, voltmeter_case, voltmeter_box, stl, voltmeter, thingiverse, ac_voltmeter,...
5
5.0
Mar 3, 2021
03/21
by
Bernd Hannemann (DH1ND)
data
eye 5
favorite 0
comment 0
The following instruction is only useful for electrically talented people. No liability is assumed for damages resulting from this! For a quick check of the battery voltage I wanted to use a 0.36" LED DC Digital Voltmeter Panel from ebay . The DC socket with small dimensions allows a compact design. With sheet metal screws (2,9x6,5) I fixed the DC socket and soldered it to the short wires of the module. The cover is fixed with four screws (M3x12mm) and nuts. Finally I printed a 12mm wide...
Topics: dc_voltmeter, voltmeter, Electronics, thingiverse, LED_voltmeter, stl
5
5.0
Mar 13, 2021
03/21
by
Aleksandr Loza (ALoza)
data
eye 5
favorite 0
comment 0
On motorcycles, the weak point is the voltage regulator relay. To monitor its condition, a voltmeter is needed. I ordered all components on Aliexpress. Button thread dia - 15mm. Made 2 steering mount options: straight and angled. I used epoxy to seal the case.
Topics: LED_voltmeter, thingiverse, Voltmeter, voltmeter_case, stl, Electronics
7
7.0
Jan 20, 2021
01/21
by
Alex Huss (mojode)
data
eye 7
favorite 0
comment 0
A housing for two LED voltmeters with 3 or 2 wires 0.36 " like https://de.aliexpress.com/item/Mini-Digital-4-5v-30v-Red-LED-display-For-Electromobile-Motorcycle-car-Voltmeter-tester-Voltage-Panel/32788845362.html
Topics: LED_voltmeter, DIY, thingiverse, voltmeter, voltmeter_case, tronxy_X5S, stl
3
3.0
Mar 25, 2021
03/21
by
Claude Theroux (ctheroux)
data
eye 3
favorite 0
comment 0
This is a simple voltmeter housing. These voltmeters are widely available on AliExpress or eBay. Their display size is typically 2.4cm x 1.4 cm (0.36 inch). The mounting holes are 28mm apart. You will need either 2 small screws or some glue to assemble it. Support is not required. This object main web page is: http://www.ctheroux.com/voltmeter-housing/. You can request the source files on the page listed above.
Topics: stl, LED_voltmeter, thingiverse, Voltmeter Case, Voltmeter Housing, Electronics, Voltmeter, Display...
6
6.0
Mar 17, 2021
03/21
by
Travis Paulson (PrintAddiction)
data
eye 6
favorite 0
comment 0
Use with cheap eBay voltmeter. Place voltmeter inside case upside down on a flat surface.; and fill the back with silicon. Wipe off excess so back is filled with silicon and flat. Allow to dry for several hours to make a cheap water resistant voltmeter. Mounts with two small crews
Topics: voltmeter case, led voltmeter, oltmeter cover, stl, voltage, thingiverse, Electronics, voltmeter
9
9.0
Jan 16, 2021
01/21
by
Dennis H. (mightynozzle)
data
eye 9
favorite 0
comment 0
This is a 2020 (2040 works as well) side mount for the cheap 0.28 inch mini voltmeter from banggood. You can mount it on the left or right side. ####BOM - [Geekcreit 0.28 Inch 2.5V-30V Mini Digital Voltmeter Voltage Tester Meter](https://www.banggood.com/0_28-Inch-2_5V-30V-Mini-Digital-Voltmeter-p-974258.html?p=V82810431930201401SE) - 1x M5 screws, 10mm length (ISO7380) - 1x M5 washer (ISO7090) - 2 small screws (
Topics: 3D Printer Parts, voltmeter_box, LED_voltmeter, 2040_bracket, 2040_extrusion, 2040_mount,...
4
4.0
Apr 13, 2021
04/21
by
Piotr Curious (curious_pl)
data
eye 4
favorite 0
comment 0
Usually after severe nuclear meltdown one needs to replace all instrumentation panels - either because they shattered or because of their contamination. You can save few dimes in your nuclear plant budget and print your own front panel. remember to seal the "0" slider,after 0 adjustement, with i.e. piece of duct tape to prevent radioactive dust escaping from iniside of instrument. TODO - nicer 0 slider , some kind of latching of panel's backplate (ABS juice glue is ok but looks ugly),...
Topics: thingiverse, voltmeter, voltmeter_case, Replacement Parts, stl
3
3.0
Mar 13, 2021
03/21
by
Gaston Dombiak (gdombi)
data
eye 3
favorite 0
comment 0
Custom Box for Digital Voltmeter & Ammeter ================================== Fast and easy print to add a box to your cheap digital voltmeter and ammeter. For my setup, I used: * 2 x M3 screws (6mm or 8mm) * 5 x 4mm banana plugs * 5 x M4 Binding Post (3 red and 2 black) * 20 AWG of whatever length you need (since I made my own cables) STEP files included in case you want to add your own variation.
Topics: thingiverse, Ammeter-Voltmeter, Ammeter, stl, voltmeter, Electronics
3
3.0
Apr 2, 2021
04/21
by
Michael Fornasiero (mike_forn)
data
eye 3
favorite 0
comment 0
Case and Mounts designed for the Bayite DVM036A 3-Wire LED Voltmeter available from Amazon (https://www.amazon.com/bayite-Digital-Voltmeter-Display-Motorcycle/dp/B00YALUXH0/ref=sr_1_4?dchild=1&keywords=3+wire+voltmeter&qid=1585424214&sr=8-4) Two different bottom covers allow for mounting with double sided tape or fasteners. Sized for M3x16 fasteners.
Topics: thingiverse, Electronics, voltmeter, bayite, stl, voltmeter_case
12
12
Apr 16, 2021
04/21
by
KeithA Hitchman (Wangler)
data
eye 12
favorite 0
comment 0
Intended to house a 0.56” Mini DC 0-99V Voltmeter LED Display Volt Meter Digital Panel Meter. Obtained from this e-bay listing: http://www.ebay.com/itm/221247476526?_trksid=p2060778.m2749.l2648&ssPageName=STRK%3AMEBIDX%3AIT
Topics: LED_voltmeter, housing, thingiverse, stl, voltmeter, box, Electronics
4
4.0
Apr 20, 2021
04/21
by
Robin Okurka (OkurRo)
data
eye 4
favorite 0
comment 0
this is precise model of Mini digital voltmeter 2.5V - 30V LED 0.28 inch screen model from the link below: https://s.click.aliexpress.com/e/Y9wr8g0
Topics: thingiverse, stl, model, LED_voltmeter, voltmeter, DIY
10
10.0
Apr 30, 2021
04/21
by
glassy (glassy)
data
eye 10
favorite 0
comment 0
an enclosure/cover for a Mean Well 12 PSU Model RS-15-12 and a prototype board (75.5x51mm) plus enclosure for a panel voltmeter 5135-LCD DC-20 ( 79x42x26mm ) on a column. The mains switch is from mouser.com : http://eu.mouser.com/ProductDetail/E-Switch/R6ABLKREDAF/?qs=sGAEpiMZZMtNT9UGfLL4eD%2ffQBVjEjwGqdlbQiyh%252bKc%3d datasheet of the switch :http://www.mouser.com/ds/2/140/R6-346382.pdf tumbler switches are mini ones with ∅ 6mm neck Originally the backlight of this voltmeter is blue, but I...
Topics: stl, voltmeter, enclosure, Electronics, digital_voltmeter, voltmeter_box, thingiverse,...
5
5.0
Mar 5, 2021
03/21
by
Tomasz Milcewicz (tomil1)
data
eye 5
favorite 0
comment 0
I design this housing in Moment of Invention v. 3.0 . I use voltmeter 0,28 inch and 5.5 mm / 2.1 socket .
Topics: Tools, stl, voltmeter_box, voltmeter_case, housing, thingiverse
4
4.0
Apr 11, 2021
04/21
by
Tom (Tom_Maragos)
data
eye 4
favorite 0
comment 0
Just a little case for a cheap ($1.85) and tiny voltmeter like this: http://www.ebay.com/itm/131051474424?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT any questions, recommendations, or alternations that you would like to see, let me know!
Topics: thingiverse, voltmeter, mini, LED_voltmeter, stl, case, Electronics, cheap
7
7.0
Jan 19, 2021
01/21
by
Marco Tonoli (marcottt)
data
eye 7
favorite 0
comment 0
Hi all, this is a support for a led voltmeter. i used this: https://it.aliexpress.com/item/0-28-inch-0-28-DC-3-5-30V-Super-Mini-Digital-Red-Green-Blue-Yellow/32830098202.html?spm=a2g0s.9042311.0.0.2qQ9k6 The support do no need glue or screws and let free to use the sd slot without problem.
Topics: LED_voltmeter, delta, 3D Printer Accessories, thingiverse, voltmeter, stl
3
3.0
Mar 19, 2021
03/21
by
(skarion)
data
eye 3
favorite 0
comment 0
Soporte para poner un voltimetro/amperimetro en el hueco de la pantalla original (ya que tengo montada una tft24) y un interruptor para conectar o desconectar la placa controladora independientemente de si la fuente de alimentación está funcionando o no Yo he usado este amperimetro: https://www.banggood.com/Geekcreit-Mini-Digital-Voltmeter-Ammeter-DC-100V-10A-Voltmeter-Current-Meter-Tester-BlueRed-Dual-LED-Display-p-1416489.html?rmmds=myorder&cur_warehouse=CN Y este interruptor:...
Topics: voltmeter_box, anet_a8_mods, Ammeter-Voltmeter, Amperimetro, digital_voltmeter, Voltimetro,...
9
9.0
Apr 26, 2021
04/21
by
Chris L. (stylesuxx)
data
eye 9
favorite 0
comment 0
This is a customizable case for the [Seed Technology Voltmeter](http://www.digikey.at/product-detail/de/seeed-technology-co-ltd/114990164/1597-1237-ND/5487639). You can adjust the thickness of the walls, the tolerance between the parts and can adjust for other display sizes.
Topics: customizer, thingiverse, customizable, voltmeter, enclosure, digital_voltmeter, LED_voltmeter, stl,...
5
5.0
Jan 7, 2021
01/21
by
maki box850 (makibox850)
data
eye 5
favorite 0
comment 0
This is declared "work in progress" and it might be for a long period of time. Have to much projects in the pipeline. This project is only for the educated guy's and gal's. I have not provided how to populate the board, intentionally. Just released before Christmas time to make something new. The files: The pcb file size is 50x75mm. The drawings are NOT mirrored, all view from top side. The pcb design files I have created are made after a few incomplete pictures /videos and the...
Topics: stl, LED_voltmeter, Arduino, thingiverse, Electronics, soldering kit, Voltmeter
4
4.0
Mar 25, 2021
03/21
by
Stephen Schnabel (ElectroFluxSS)
data
eye 4
favorite 0
comment 0
This is a 3-channel lab power supply with 5 amps each channel. The 2 adjustable can be set to the same voltage and hooked in parallel for 10 amps or set to 13.6 volts and all 3 channels used for 15 amps. By using XL4015 buck converter, can raise output current to 5 amps as opposed to using the LM2596 rated at 2 amps. The XL4015 also has an adjustable/constant current upgrade. I use the small heat sink from a PI as opposed to using fans on these. Complete part list - All on Amazon o 3 x XL4015:...
Topics: stl, voltmeter_case, Current_Meter, PSU, thingiverse, voltmeter, Electronics, power_supply,...
Practical Wireless magazine, Feburary 1955
Topics: Radio, Hobby, Voltmeter
4
4.0
Jan 11, 2021
01/21
by
James Feurtado (James_R5D4)
data
eye 4
favorite 0
comment 0
I drew these up ages ago, before actually thinking that someone might have already designed up a holder lol. But most are fitted into panels or enclosures. So these, designed to be mounted onto face panels, are different. The digital volt meter, will require the removal of it's mounting tabs and also the slight filing down of the board for it to be a snug fit into the holder. This version is the double holder, just because someone might actually need one. (I've not printed a double version yet,...
Topics: panel_mount, thingiverse, Electronics, digital_voltmeter, stl, voltmeter, holder, LED_voltmeter,...
6
6.0
Apr 20, 2021
04/21
by
MICHAEL LYNCH (mlynch002)
data
eye 6
favorite 0
comment 0
I wanted a way to see how much power was being used and to make sure that my power supply was putting out enough power to make the printer run effectively. This is absolutely not needed, but I am a gauge-a-holic, so I wanted a dashboard for my ENDER 3. Bought the meter from AMAZON. IT is a 4 wire hook up and very easy to wire up. Made the harnesses, soldered and crimped connectors, added the shunt to the bottom of the power supply. I particularly like the fact that this meter calculates WATTS...
Topics: thingiverse, stl, Wattmeter, Ammeter, voltmeter, 3D Printer Accessories, Ammeter-Voltmeter
3
3.0
Apr 4, 2021
04/21
by
daniel desc (dandesc)
data
eye 3
favorite 0
comment 0
A volt-ampere meter faceplate, with shunt mounting support. I designed this one cuz i cant find any with shunt mount. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of design. Thanks, Enjoy!
Topics: thingiverse, voltmeter mount, Electronics, mount, stl, faceplate, Ampmeter_mount, voltmeter
3
3.0
Jan 18, 2022
01/22
by
Justin Weathersby (jTime)
data
eye 3
favorite 0
comment 0
-- WORK IN PROGRESS -- This is a mounting box for a Bayite meter. Appears that Bayite uses the same enclosure for both the AC and DC models so this should work for either. Links: https://www.amazon.com/gp/product/B01D8G9GPW/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B013PKYILS/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Topics: meter, bayite, thingiverse, Tool Holders & Boxes, box, voltmeter, stl, voltmeter_box
9
9.0
Jan 16, 2021
01/21
by
MATTHEW SHOUP (simplyflipflops)
data
eye 9
favorite 0
comment 0
I purchased a few 4 digit led voltmeters on ebay: http://ebay.to/2f9kDaT I thought it would be best to enclose them. Hence this design. It's rather simple but it fits like a glove.
Topics: LED_voltmeter, Electronics, stl, thingiverse, voltage, voltmeter, LED_Voltage_Display
4
4.0
Mar 25, 2021
03/21
by
Stephen Schnabel (ElectroFluxSS)
data
eye 4
favorite 0
comment 0
The case was made larger than needed and was customized to fit my desk and originally intended on providing larger currents with MOSFETs or BJTs, but settled on just using 3 x LM2596 buck converters rated at 3 amps. Complete part list - All on Amazon o 3 x LM2596: https://www.amazon.com/dp/B07V7F5K8T/?coliid=I2TE2W6WVYO4IB&colid=25HFOU11NOSBQ&psc=1&ref_=lv_ov_lig_dp_it o 3 x Volt/Amp Meters:...
Topics: stl, voltmeter_case, Benchtop_Power_supply, Current_Meter, Ammeter, thingiverse, buck_converter,...
9
9.0
Apr 28, 2021
04/21
by
Tobo Cop (scullhead)
data
eye 9
favorite 0
comment 0
Simple case for a 3 digit 7 segment digital voltmeter
Topics: thingiverse, case, Tool Holders & Boxes, voltmeter, LED_voltmeter, stl, housing
11
11
Jan 9, 2021
01/21
by
Maik Justus (MakerMaik)
data
eye 11
favorite 0
comment 0
Customized version of http://www.thingiverse.com/thing:2104116 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2104116 Fits perfectly for this Voltmeter: http://www.banggood.com/0_28-Inch-2_5V-30V-Mini-Digital-Voltmeter-p-974258.html I use this for quickly measure the voltage level of my 1s LiPos.
Topics: thingiverse, Electronics, stl, voltmeter, LED_voltmeter, openscad, customized, scad, case
Hewlett-Packard HP3460B Digital Voltmeter Operating and Service Manual 03460-90004 (July 1969)
Topic: Hewlett-Packard HP3460B Voltmeter
68
68
Jun 12, 2020
06/20
by
Tecnica Elettronica System
texts
eye 68
favorite 0
comment 0
"Istruzioni funzionamento – Voltmetro elettronico mod. VE. 154". La scritta in alto sulla copertina sembra posticcia.
Topics: manuale, voltmetro, manual, voltmeter
HP - 3430A - DIGITAL VOLTMETER OPERATING AND SERVICE MANUAL
Topic: HP 3430A - DIGITAL VOLTMETER
8
8.0
Jun 20, 2021
06/21
by
M. K. (Extraball)
data
eye 8
favorite 0
comment 0
You can use it from bottom or top down. The Ampmeter will fit from both sides. Thickness is 20 mm, the frame is not closed. You are able to remove the ampmeter in both directions by rotating it 90° (very comfortable if the cables are connected and you wont remove them). I´ve used em for my DC "100V 20A" Voltmeter & Ammeter (Red/Green) YB4835VA Does NOT fit the DC "100V 10A" Voltmeter & Ammeter (Red/Blue) DSN-VC288 Please check that befor :) . --- Edit: 17.06.2018...
Topics: YB4835VA, Ampmeter mount, Voltmeter, thingiverse, Ampmeter Case, Amperemeter, stl, D-Bot,...
2
2.0
Dec 14, 2021
12/21
by
JustGotta Printer (MyStoopidStuff)
data
eye 2
favorite 0
comment 0
DEC 9, 2021 00:46 UTC - Updated the dimensions for the LED's. This is a quick remix of my "USB Volt Meter / USB Multimeter Case" (https://www.thingiverse.com/thing:4710694), and is designed to be used with a USB Power Meter / Tester. I bought mine on Ebay, but you can find a similar model at Amazon, the "MakerHawk USB Multimeter USB Voltmeter Ammeter Load Tester USB Voltage Current PD Battery Power Capacity Charger Digital Type C Meter Tester Color LCD Display Cable Resistance...
Topics: voltmeter, MakerHawk, Tools, USB Voltmeter, stl, thingiverse, multimeter, USB VOM
6
6.0
Mar 3, 2021
03/21
by
Szilárd Greszler (dralisz82)
data
eye 6
favorite 0
comment 0
3 digit voltmeter model with real dimensions This is a model of a voltmeter, you can buy on eBay This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2xEjZgbBu8t
Topics: thingiverse, voltmeter, Electronics, stl
3
3.0
Jun 6, 2021
06/21
by
pierre porcheret (nerkdesign)
data
eye 3
favorite 0
comment 0
Simple Voltmeter (0-30V) https://www.amazon.com/MCIGICM-Voltage-2-5V-30V-Digital-Voltmeter/dp/B07Q2RQYPJ/ref=sr_1_36?crid=340PVD3H1AIR6&keywords=voltmeter&qid=1568107519&s=gateway&sprefix=voltm%2Caps%2C236&sr=8-36 Connect The yellow wire and red wire on the switch in order to link the probe with the positive pin.
Topics: voltmeter, stl, Tools, thingiverse
10
10.0
Jan 9, 2021
01/21
by
Félix García (STIG_)
data
eye 10
favorite 0
comment 0
Enclosure to protect eBay Digital Volt Meters. **Updated 11/6/2019 Re-designed it in Fusion 36 for better clearances and file. Same basic design.
Topics: thingiverse, Volt meter, digital_voltmeter, Electronics, stl, voltmeter, ebay volt meter
5
5.0
Mar 4, 2021
03/21
by
Christian Grogg (CG-Tech)
data
eye 5
favorite 0
comment 0
Mount to clamp these cheap mini-Voltmeters to the Handlebar of a DIY electrik bike or scooter. Voltmeter: https://www.ebay.ch/itm/Yellow-0-28-Mini-Voltmeter-12V-Two-Wire-LED-Digital-Voltage-Meter-2-Cables/222681396046?ssPageName=STRK%3AMEBIDX%3AIT&var=521536239602&_trksid=p2060353.m2749.l2649
Topics: handlebar, voltmeter, DIY, handlebar_mount, thingiverse, LED_voltmeter, cubicle, stl, bike
13
13
Jan 16, 2021
01/21
by
Joshua Carmack (joshuacarmack)
data
eye 13
favorite 0
comment 0
Arduino Battery Tester case for my Project 1 for CSCI-1200 Adventures in Computing at East Tennessee State University. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gNCb5jpelCv
Topics: voltmeter_box, Arduino_Uno, arduino, thingiverse, voltmeter, battery, 3D Printing, stl
3
3.0
Apr 4, 2021
04/21
by
Luca Bonetto (Luca_Bon)
data
eye 3
favorite 0
comment 0
Supporto amperometro quadro elettrico - electrical panel amperemetersupport Usare bullone da 4mm con dado cieco - Use 4mm bolt with blind nut
Topics: thingiverse, Ammeter, Electronics, Ammeter-Voltmeter, Ampere, Electrical_Box, stl, Amperemeter,...
8
8.0
Apr 17, 2021
04/21
by
Triple Mike (TripleMike)
data
eye 8
favorite 0
comment 0
See publisher's website for summary.
Topics: DC-DC_Converter, Ammeter, boost_converter, thingiverse, stl, voltage_regulator, voltmeter,...
11
11
Jan 18, 2021
01/21
by
emre kuyumcu (BecoEmicen)
data
eye 11
favorite 0
comment 0
This is for Volt or Ampere meter I cant find any thing and ı decided to desingn this is my order: Sampling rate: 300 ms Operating Current: Display: 0.56 "LED Measuring range: 0 ~ 99.9V Operating temperature: -10 Celsius ~ 65 Celsius Sampling rate: 300 ms Operating Current: Display: 0.56 "LED Measuring range: 0 ~ 99.9V Operating temperature: -10 Celsius ~ 65 Celsius Screen size: 5 x 3 x 1.8 cm Digital Display: Red Operating Voltage: DC 4 - 30V Range: 0 - 50A package content:1 x...
Topics: 20x20, Sigma, 3D Printer Accessories, Ammeter, YX-Ammeter-Voltmeter, Ammeter-Voltmeter,...
15
15
Jun 20, 2021
06/21
by
maki box850 (makibox850)
data
eye 15
favorite 0
comment 0
Update: Nicht aufgeben. Es geht später hier weiter. Will continue the work after having finished the other voltmeter https://www.thingiverse.com/thing:3182399 Hier entsteht ein Beitrag ueber den Bau eines MOSFET Voltmeters aus den fruehen 70er Jahren. Zentrales Element ist der Doppeltranstor SMY-51 aus dem WF (Werk fuer Fernsehelektronik , Berlin-Schoeneweide, DDR) This thing is about an upcomeing MOSFET voltmeter using SMY-51 p-channel MO SFET made in the former German Democratic Republic (...
Topics: thingiverse, voltmeter, Electronics, stl, MOSFET
5
5.0
Jun 6, 2021
06/21
by
Alexandr Kondratev (theg4sh)
data
eye 5
favorite 0
comment 0
Small case for electronic voltmeter from Ebay, designed for tight connection.
Topics: thingiverse, voltmeter, case, stl, Electronics
8
8.0
Mar 25, 2021
03/21
by
T Bread (bread)
data
eye 8
favorite 0
comment 0
This is a small mounting plate for voltmeter I purchased on Amazon. The meter is intended to be panel mounted, but I wanted to keep it portable and use it in various locations, so I made this to make it more useful. The holes the the top are to allow hanging onto anything convenient. This plate also gives me the option to anchor the wires to prevent strain. This is only the beta, and a flat version. I wanted to use this for a while and see what improvements I would need. I plan to make another...
Topics: stl, Volt, voltmeter_case, thingiverse, voltmeter, diy, panel_mount, Electronics, meter,...
356
356
texts
eye 356
favorite 0
comment 0
SCHEMATIC
Topics: HEATHKIT, AV-2, AC VOLTMETER
4
4.0
Mar 13, 2021
03/21
by
Narcis Bing (Bingn)
data
eye 4
favorite 0
comment 0
my little idea how should be :)
Topics: thingiverse, Volt, stl, voltmeter, Electronics
3
3.0
Mar 22, 2021
03/21
by
JAUME YEBRA (JAUYEB)
data
eye 3
favorite 0
comment 0
Mounting bracket for ammeter or voltmeter. Materials for each mounting bracket: - 2 screw (size depends on the ammeter or voltmeter) - 2 bolt I hope to help you with a font code in Autodesk Inventor. Also check out my other designs: https://www.thingiverse.com/JAUYEB/designs Make my day by push Like Button if you like it and post your Makes!
Topics: Ammeter-Voltmeter, holder, stl, Tools, mounting, mounting_bracket, Ammeter, voltmeter, thingiverse,...
4
4.0
Apr 13, 2021
04/21
by
Peter I (Peter_I)
data
eye 4
favorite 0
comment 0
How is the power supply keeping up? You could grab the multimeter, but you could also buy one of the surprisingly cheap V20D voltmeters from Evilbay, deal-and-scream or Mines-in-a-box. Mounted on the printer or the power supply, you will have a constant read-out of the voltage. (And LEDs are great and make you happy!) It is cheap for a reason. It is just three 7-segment LEDs and a bare PCB on the back. It deserves a casing, and here it is:
Topics: thingiverse, voltmeter, 3D Printer Accessories, LED_voltmeter, stl, V20D, 3D_Printer_Parts
10
10.0
Apr 7, 2021
04/21
by
shaun saggers (ssaggers)
data
eye 10
favorite 0
comment 0
This bracket was designed to mount a small digital voltmeter on the back of my Powertech MP3800 laboratory power supply. While the power supply does in fact have an analogue voltmeter on the front, I prefer something more precise, with known accuracy. http://teslaandi.wordpress.com/2014/02/02/power-supply-voltmeter-retrofit/
Topics: powersupply, Electronics, digital_voltmeter, voltmeter, stl, mount, bracket, thingiverse,...
