5
5.0
Mar 5, 2021
03/21
by
Eric Berg (ericinventor)
data
eye 5
favorite 0
comment 0
These are the parts I used to mount an RC servo to a ball valve in order to make an electronically controlled servo valve.
Topics: flow control valve, stl, water valve, valve, electronic valve, solenoid valve, servo valve, DIY...
5
5.0
Mar 15, 2021
03/21
by
Tianyu Liu (tliu93)
data
eye 5
favorite 0
comment 0
In the Netherlands if you buy a service valve sometimes it is without a handle. So I create one. Additional hardware needed: A M3x12mm screw.
Topics: thingiverse, valve, water_valve, valve_cap, service valve, stl, Household Supplies
5
5.0
Jan 11, 2021
01/21
by
Barlow, John B., 1924-
texts
eye 5
favorite 0
comment 0
xviii, 381 p. : 26 cm
Topics: Mitral valve -- Diseases, Heart Valve Diseases, Mitral Valve
2
2.0
Oct 29, 2021
10/21
by
Yemi TheGreat (YemiTheGreat)
data
eye 2
favorite 0
comment 0
Cylindrical Tesla Valve, allows smooth flow of fluid (water, air etc) in one direction. I only ever found flat designs everywhere else, so I made a cylindrical version for use in DIY engineering projects. included sketchup file so you can modify it according to fit your project/make
Topics: tesla valve, thingiverse, Engineering, Tesla, valve, fluid valve, stl, water valve
2
2.0
Jan 18, 2022
01/22
by
Florian W. (flow_241)
data
eye 2
favorite 0
comment 0
Added a thread G 1/2"
Topics: valve_cover, ventil, Eckventil, thingiverse, water_valve_cover, valve, Bathroom, stl,...
9
9.0
Jan 13, 2021
01/21
by
Ozgur Atak (Ozguratak)
data
eye 9
favorite 0
comment 0
its working with 6 mm bb pellets. After printing you should cut the part 1's mouth then set on bb then glue together and your check valve is ready. if you want it you can change size and get smaller or bigger so that I didn't take the bb :) have fun!
Topics: thingiverse, One_Sided, stl, Ball_Valve, Parts, water_valve, valve, check_valve
18
18
Mar 9, 2017
03/17
by
Gametacle
movies
eye 18
favorite 0
comment 0
The final part of HL: Opposing Force.
Topic: valve
7
7.0
Dec 18, 2020
12/20
by
Center for Accessible Technology in Sign
movies
eye 7
favorite 0
comment 0
ASL vocabulary
Topic: valve
40,955
41K
Dec 5, 2017
12/17
by
Valve
software
eye 40,955
favorite 108
comment 11
This edition of Half-Life 2 includes the game on a limited edition DVD-ROM and some exclusive extras. The extras included: Counter-Strike: Source - The next generation of the #1 online action game Half-Life: Source - Digitally remastered version of the original acclaimed PC game Following the period of instability caused by the events described in Half-Life , an interdimensional organization known as the Combine invades the Earth, defeating the human forces in the Seven Hour War. A...
favoritefavoritefavoritefavorite ( 11 reviews )
Topic: valve
9
9.0
Jan 13, 2021
01/21
by
Vasyl Lopatkin (LiViS)
data
eye 9
favorite 0
comment 0
Накладка на ручку шарового крана. Облегчает пожилым, женщинам и детям жизнь при попытке перекрыть/открыть воду в квартире/саду. Разместил две модели с плечами 50 мм. и 70 мм. Верхняя часть накладки плоская и позволяет разместить наклейку с обозначением, за что отвечает...
Topics: cover, valve_cap, thingiverse, stl, valve_cover, Household, valve
4
4.0
Mar 31, 2021
03/21
by
Chris Simons (mrsim0ns)
data
eye 4
favorite 0
comment 0
Drafted from scratch in Fusion360, using [JohnEdwa's design](https://www.thingiverse.com/thing:3210233) as inspiration. Should fit most Schrader valves. Can be tapped with 8v1-32, or just threaded on with force.
Topics: hand_wheel, thingiverse, schrader_valve, valve_stem, schrader, Hobby, valve_cap, valve, stl
6
6.0
Jun 20, 2021
06/21
by
deesse deesse (deesse)
data
eye 6
favorite 0
comment 0
Presta to Schrader valve adapter. The adapters I found on Thingiverse either leaked air, or they were too thin and broke after using twice. So here is an improved version. Features: - easily reaches 10 bars (148 psi) for racing tires. - excellent seal with the pump chuck (since no external thread is used that leaks air). - extra-long stem to prevent the chuck pin from pushing against the valve tip (no hassle with air escaping as you connect the pump). - virtually unbreakable....
Topics: dunlop, schrader_valve, schrader, Sport & Outdoors, thingiverse, Sclaverand_valve,...
13
13
Aug 25, 2015
08/15
by
Durán, Carlos; International Symposium on the Mitral valve (2nd : 1982 : San Diego, Calif.)
texts
eye 13
favorite 0
comment 0
Includes bibliographical references and index
Topics: Heart Valve Diseases, Mitral Valve
116,839
117K
Mar 26, 2016
03/16
by
Sierra Studios
software
eye 116,839
favorite 151
comment 25
--------------------------------------------------------------------------------------------- This re-release of Half Life contains new multiplayer 3D models, new multiplayer maps, and Team Fortress Classic , all of which can also be downloaded separately. (I think Half Life: Game of the Year Edition is FULLY-WORKED of Windows 8 Pro!) --------------------------------------------------------------------------------------------- SYSTEM REQUIREMENTS FOR THE GAME! (Works for Windows 8 Pro)...
favoritefavoritefavoritefavorite ( 25 reviews )
Topic: valve
7
7.0
texts
eye 7
favorite 0
comment 0
xxii, 753 pages :
Topics: Mitral valve insufficiency, Mitral valve -- Displacement, Mitral Valve Insufficiency, Mitral Valve...
6
6.0
Jun 11, 2021
06/21
by
(SE_2018)
data
eye 6
favorite 0
comment 0
Summary Designed with Solid Edge ST9 / Rendered with KeyShot Cutted version:https://www.thingiverse.com/thing:3447558
Topics: thingiverse, valve, ball valve, stl
4
4.0
Mar 10, 2021
03/21
by
Chris Chris (chris_kmn)
data
eye 4
favorite 0
comment 0
Just a small lever for a 1/8" ball valve
Topics: Replacement Parts, water_valve, stl, thingiverse, Ball_Valve, valve, lever
5
5.0
Mar 9, 2021
03/21
by
Joaquin Aguerre (TomExplorador)
data
eye 5
favorite 0
comment 0
3D model of a solenoid valve. I have used a WEMOS-D1 mini to control the valve from the internet.
Topics: Outdoor & Garden, water_valve, electric_valve, stl, thingiverse, valve, water_pump,...
3
3.0
May 20, 2021
05/21
by
Stas bat (Lar_Bat)
data
eye 3
favorite 0
comment 0
Check valve SHtorka.STL Infill 100
Topics: Ventilation, thingiverse, check valve, air valve, valve, stl, Hand Tools
10
10.0
Jan 11, 2021
01/21
by
Marcel Ochsendorf (RBEPrinter)
data
eye 10
favorite 0
comment 0
This is a simple holder, to hold a 2/2 way magnetic valve on the wall. The valve i used has 2 mounting screws on the bottom, so you cant easily mount it on a wall.
Topics: thingiverse, magnetic_valve, stl, valve, holder, valve holder, Household, magnetic
3
3.0
Jul 3, 2021
07/21
by
Francesco Maciariello (Macia)
data
eye 3
favorite 0
comment 0
Some years ago I saw this kind of valve being used to prime a siphon to move gas from a tank to another. I needed one to prime the aquarium siphon so I decided to deisgn my own. This is a print in place design. Orient the piece with the inlet on the buildplate and you won't need any supports. This valve fits a 12mm ID tube but I included the Inventor file so that you can customize it. I hope you like it. If you do please leave a like! PS I printed it in resin to obtain a better surface finish....
Topics: siphon, siphon_valve, valve, Automotive, siphone_valve, thingiverse, stl, siphone
4
4.0
Apr 11, 2021
04/21
by
Rene Marhold (djmad)
data
eye 4
favorite 0
comment 0
Designed for easy cleaning, modular construction The closing mechanism is a standard part from maedler http://www.maedler.de/product/1643/2593/verschluss-spanner-edelstahl The Springs need to be adjusted to actual needs (pressure)
Topics: thingiverse, valve, stl, linear_valve, Other
173
173
Nov 26, 2014
11/14
by
Brockbank, E. M. (Edward Mansfield), 1866-
texts
eye 173
favorite 0
comment 0
Includes index
Topics: Mitral valve, Mitral Valve, Heart Murmurs
4
4.0
Apr 1, 2021
04/21
by
ibrahim konas (ikonas)
data
eye 4
favorite 0
comment 0
I designed these parts for the health system. You are using a one-way check valve to breathe. you are using two-way and opposite. It can be printed from a 3D printer. But I haven't tested it yet. You are using two. One for breathing and the other given breath through the the help of a pipe, to kill the virus to alcohol solution. Bu parçaları sağlık sistemi için tasarladım. Nefes almak için tek yönlü bir çek valf kullanıyorsunuz. iki yönlü ve ters kullanıyorsunuz. 3D yazıcıdan...
Topics: check_valve, thingiverse, Other, valve, stl
3
3.0
Jun 7, 2021
06/21
by
Constantin Dragu (Costa_D)
data
eye 3
favorite 0
comment 0
ONE WAY VALVE - TESLA - RESPIRATOR Full printed part. Part was design to print without support. A temporary bridge was design near connections, remove the 0.2mm material after printing. Clean, wash and sanitize the part before using. Connections - 3/4 AND 22mm hose. Equipped with 2 - 4mm holes. Use 4mm bolts to secure the part, or to plug the unused holes. One way valve, following TESLA design, to equip Medical Respirator. Design was not tested as a medical part. This is last resort solution....
Topics: COVID19, VALVE, thingiverse, ONE WAY VALVE, RESPIRATOR, DIY, stl, covid-19, TESLA VALVE, MEDICAL...
9
9.0
Apr 28, 2021
04/21
by
Adam Mora (AdamDam)
data
eye 9
favorite 0
comment 0
Suport for a 12V electrovalve
Topics: electro_valve, Engineering, thingiverse, stl, valve
4
4.0
Mar 9, 2021
03/21
by
Jeff Lee (Jeffleejr)
data
eye 4
favorite 0
comment 0
Use a 6mm airsoft BB and glue the cap on
Topics: stl, thingiverse, check_valve, Tools, valve
2
2.0
Oct 30, 2021
10/21
by
Anatoliy RY (tolyan4eg)
data
eye 2
favorite 0
comment 0
Воздушный обратный клапан 204x60 мм Air check valve 204x60 mm
Topics: thingiverse, valve, stl, check_valve, Other
6
6.0
Apr 20, 2021
04/21
by
Semkan Uragan (Semkan)
data
eye 6
favorite 0
comment 0
Water valve controlling the bidet water in my toilet was lost. I designed and printed this in Fusion 360 by reverse engineering a spare one. Should fit any water valve that has a 6.25mm shaft.
Topics: thingiverse, valve, stl, water_valve, Bathroom
9
9.0
Jun 10, 2021
06/21
by
Michael Charles (Iceytee)
data
eye 9
favorite 0
comment 0
This is a handle for a 2" ball valve. It fits nice but it didn't work for me. It broke the first couple of times I used it. Maybe you have a use for it. Enjoy!
Topics: ball valve, valve handle, stl, thingiverse, Replacement Parts, valve, handle
3
3.0
Apr 27, 2021
04/21
by
Laurens van Lieshout (laurens1952)
data
eye 3
favorite 0
comment 0
Butterfly valve Used to separate ant colonies ~90x40x26mm / hose inside 8mm Update in progress
Topics: butterfly valve, thingiverse, stl, Parts, valve
2
2.0
Jul 22, 2021
07/21
by
Nils Husen (nils_husen)
data
eye 2
favorite 0
comment 0
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: valve, stl, Valve_Index, thingiverse, Gadgets
3
3.0
texts
eye 3
favorite 0
comment 0
xiv, 336 p. : 26 cm
Topics: Tricuspid valve -- Abnormalities, Tricuspid valve -- Surgery
Reprinted from: Medicine (Jul. 1900)
Topics: Heart Valve Diseases, Mitral Valve Stenosis
3
3.0
Apr 2, 2021
04/21
by
Lex Ra (Lehs)
data
eye 3
favorite 0
comment 0
breath valve and exhalation valve for breathing mask/ Based on https://www.thingiverse.com/thing:4239407
Topics: thingiverse, respirator, breath_valve, Other, valve, breathing mask, stl, exhalation valve
3
3.0
Apr 19, 2022
04/22
by
Hoffman, Ronald L
texts
eye 3
favorite 0
comment 0
48 pages ; 22 cm
Topics: Mitral valve -- Displacement, Mitral valve -- Displacement -- Popular works, Mitral Valve Prolapse
3
3.0
Jun 7, 2021
06/21
by
David McCormick (gwizdavid)
data
eye 3
favorite 0
comment 0
Valve Index headset tightening knob. Even before I got my Index I knew I needed to design and print this. The OEM knob snaps off and this snaps on. I did a lot of trial and error with sizing and found this works the best for me. However, I'd highly recommend printing just the attachment end to quickly size it according to your printer specs. I would only adjust your scaling by .03 to get it just right. Even with it snapping on, I find it does remove easily when pulled to the side. But even with...
Topics: valve_cap, thingiverse, index, valve, Valve_Index, stl, Video Games, stop
Caption title
Topics: Mitral valve, Mitral valve insufficiency, Endocarditis, Valve mitrale, Insuffisance mitrale,...
6
6.0
texts
eye 6
favorite 0
comment 0
viii, 204 pages : 26 cm
Topics: Mitral valve -- Diseases, Mitral valve -- Surgery, Mitral Valve -- diagnostic imaging, Mitral Valve...
3
3.0
Jun 11, 2021
06/21
by
Giuliano Ranauro (follen)
data
eye 3
favorite 0
comment 0
This is a simple one way valve (check valve) that needs only a bb (6 mm of diameter)
Topics: air, Tools, thingiverse, fluid, valve, check_valve, one_way_valve, stl
2
2.0
Apr 20, 2022
04/22
by
Samuel Montalto (Saul92)
data
eye 2
favorite 0
comment 0
Tire Valve Cap with integrated tool for valve removing/fixing...
Topics: thingiverse, Valve c, Vav, presta_valve, tire_valve_cap, Tools, mtb, stl, enduro, tire_valve_tool
6
6.0
Mar 4, 2021
03/21
by
Yannick LEMOINE (HellBoy_II)
data
eye 6
favorite 0
comment 0
**MOUSE VALVE CAP** *(Designed for my son's bike)* Replacement for the standard valve cap on a bicycle, bike or car. There are 2 formats (see picture 3) : + Schrader valve + Presta valve *Note : I am currently working on a guinea pig model, as well as a customizable model.* ***I did not try the Presta valve, so report printing or screwing problems if there are any !***
Topics: bicycle, stl, mouse, schrader, Gadgets, presta_valve, cap, valve, Presta, schrader_valve, bike,...
141
141
Aug 25, 2016
08/16
by
Impact Journals
texts
eye 141
favorite 0
comment 0
Its main functional is to provide the basic structure to the globe valve précised to turbulent fluidic loading and how it maintain its part structure mainly the ring area where the structure optimization to low stress value is a important factor otherwise it may lead to the leakage of fluid through the obstructer and the corresponding contact area.
Topics: Supports, Valve
3
3.0
Jan 7, 2021
01/21
by
Alexander Teterin (prokazzza)
data
eye 3
favorite 0
comment 0
Just my design of a Insta360 Go camera mount for the Diatone TinaWhoop. Super Simple.
Topics: 3D Printing, stl, Battery Valve, valve, thingiverse
7
7.0
Jan 3, 2021
01/21
by
Jan Noname (AtomiQ)
data
eye 7
favorite 0
comment 0
This is a Remixed Check Valve of the one from UpTime ( https://www.thingiverse.com/thing:935726 ) I have changed the connectors for a 9mm inner diameter hose. I have also redesigned it, so It can take a 10mm ball insteat of the printed insert and the threads were changed too to fit better together. For the ball I have used a 10mm shisha ball. But you can try and print it in the highest resolution your printer can make. Im not sure if it would work though, because the surface needs to be very...
Topics: Other, check_valve, stl, thingiverse, water_valve
Schrader -Tire Valves and Air Service - Catalog No 400 - 1960
Topic: tire valve
65
65
Aug 8, 2016
08/16
by
Begbie, James Warburton, 1826-1876. n 97803626
texts
eye 65
favorite 0
comment 0
"From Dr. Beale's Archives of medicine, no. 5, 1860"
Topic: Pulmonary Valve
4
4.0
Apr 27, 2021
04/21
by
Tim G. (Twotone74)
data
eye 4
favorite 0
comment 0
Deutsch ----------- Ich habe ein aufblasbares Bodyboard. Das ist gut für Flugreisen, aber die Pumpe ist zu groß um sie mitzunehmen. Deshalb habe ich einen Adapter auf Schrader-Ventil (Auto-Ventil) konstruiert. So kann ich das Board auch mit einer kleinen Fahrrad-Pumpe aufpumpen. Natürlich kann man den Adapter auch für SUP-Boards oder Boote verwenden, allerdings würde ich dann empfehlen einen Kompressor anstatt einer Fahrradpumpe zu nehmen! ;-) Leider habe ich erst hinterher gesehen, daß...
Topics: thingiverse, schrader_valve, SUP, stl, Valve, Sport & Outdoors, car_valve, SUP-Board
University of Glasgow Library
112
112
Apr 30, 2015
04/15
by
Quain, Richard, Sir, 1816-1898; Pathological Society of London; University of Glasgow. Library
texts
eye 112
favorite 0
comment 0
"From the Monthly journal of medical science, December 1846."
Topic: Aortic valve
3
3.0
Oct 15, 2021
10/21
by
Ivan (vkube)
data
eye 3
favorite 0
comment 0
Adjustable valve for containers, dehydrators
Topics: thingiverse, valve, valve_cap, stl, dehydrators, Containers
