9
9.0
Mar 10, 2021
03/21
by
Manollo (Indigo4)
data
eye 9
favorite 0
comment 0
Simple holder for 2-servo combo.
Topics: servo_motor, Servo_Mount, micro_servo, stl, thingiverse, 9g_servo, Gadgets, Combo, servo
9
9.0
Jan 13, 2021
01/21
by
Graham Dyer (BMGD)
data
eye 9
favorite 0
comment 0
A holder for the popular HXT 900 servo, no screws required as it is a tight fit and should not come loose under normal circumstances. A drop of thick cyano or hot glue will make it more secure if required. I use hot glue to attach them to foam fuselages and wings.
Topics: thingiverse, servo_holder, stl, Servo_Mount, 9g_servo, Vehicles, servo
4
4.0
May 1, 2021
05/21
by
Peter Sanchez (SolarApex112)
data
eye 4
favorite 0
comment 0
Servo brackets. Left and right servo mounts provided Short and long servo arms are included as well. Use M4 screws to mount the servo the bracket and M3 screws on the servo horn
Topics: stl, Servo_Mount, servo_motor, Robotics, Servo_Arm, servo, thingiverse
9
9.0
Mar 10, 2021
03/21
by
Engin Subasi (enginsubasi)
data
eye 9
favorite 0
comment 0
To mount 9g rc servo Holes m3
Topics: Servo_Mount, stl, thingiverse, 9g_servo, Parts, servo_holder, servo
4
4.0
Jun 19, 2021
06/21
by
(suzysheer66)
data
eye 4
favorite 0
comment 0
Summary While attempting to assemble an Antenna Tracker, I was having trouble handling the servo's and needed something to prototype them with. The result is a set of small "building blocks" that can be assembled with 3mm hardware. If anyone finds these of use, great ! The antenna tracker can be found at :https://github.com/KipK/Ghettostation Instructions All of these were printed in PLA. 2 perimeters, 15% infill, 0.3mm layers I started with printing support, but realized that i did...
Topics: thingiverse, servo, stl, servo_mount, servo_bracket
4
4.0
May 1, 2021
05/21
by
Aris Blocky (blockycodes)
data
eye 4
favorite 0
comment 0
This modular servo Mount is a part of Open Source Blocky Codes Modular Blocks, you can download all the parts on my profile. This one is for SG90, you can use MG90 but only on horizontal positions, I will upload the mg90 version later. Known bug: Sometimes the sg90 horn has a bit different size, so if it's not fit, you need to find your way. I also add some STL's for blocks in this post so you can try it out. Make sure your printer is calibrated. Each hole in this system is 7mm and the block...
Topics: stl, Servo_Mount, Robotics, 9g_servo, Servo_Arm, sg90, servo, thingiverse, micro_servo
6
6.0
Jan 20, 2021
01/21
by
codeandmake .com (Code_and_Make)
data
eye 6
favorite 0
comment 0
20mm disk mount for Tower Pro MG946R servo. Disk diameter: 20mm Disk thickness: 2mm Center hole diameter: 3mm Outer hole diameter (with holes version): 1.5mm Outer hole distance from center (with holes version): 8mm They should be a tight fit and might need a gentle push. Will possibly fit other servos that have a ~6mm diameter, 25 tooth shaft with M3 thread.
Topics: servo, Servo_Mount, thingiverse, Hobby, servo_horn, Servo_Arm, stl
4
4.0
Apr 15, 2021
04/21
by
andrea gambacorta (mafaldo)
data
eye 4
favorite 0
comment 0
Fit Perfect for 9g servo like TowerPro or Turnigy TG9e 9g. No glue need. See also 17g Holder Bracket https://www.thingiverse.com/thing:939274
Topics: micro_servo, 9g_servo, servo, servo_holder, thingiverse, stl, R/C Vehicles, Servo_Mount
4
4.0
Apr 15, 2021
04/21
by
andrea gambacorta (mafaldo)
data
eye 4
favorite 0
comment 0
Drawn in 5 minutes for a user is still to be tested... Check the distance between the two holes( I do not have a 5g servo to control)
Topics: micro_servo, servo, Servo_Mount, servo_holder, thingiverse, stl, R/C Vehicles, 5g_servo
5
5.0
Apr 8, 2021
04/21
by
Mark Mark (MrMdR)
data
eye 5
favorite 0
comment 0
This is a add-on for your normal small toy servo. You can drill a small hole to screw it into place. It works perfectly! :) _Do you find it useful what I made? Your can show your appreciation by taking a photo and upload it as an "i made one"! That would be awesome! :)_ A servo add-on for ontop of the servo!
Topics: Servo_Mount, Robotics, servo_arm, servo_arms, Servo, servo_accessories, stl, thingiverse,...
4
4.0
Mar 15, 2021
03/21
by
Veno Mouse (Venomouse)
data
eye 4
favorite 0
comment 0
Just some basic mounting options for 9g servos. Comes with front plate to help prevent any servo side wobble.
Topics: Servo_Mount, thingiverse, 9g_servo, micro_servo, Electronics, servo, stl
5
5.0
Mar 20, 2021
03/21
by
Jorge Augusto Balsells Orellana (JBalsells)
data
eye 5
favorite 0
comment 0
servomotors base (1.8Kg)
Topics: servo_motor, stl, Model Robots, Servo_Mount, servo, micro_servo, thingiverse
8
8.0
Jan 19, 2021
01/21
by
Mark Johnston (mjstn2011)
data
eye 8
favorite 0
comment 0
Here is a mini servo bracket for use with the standard Mg90 form factor 9g servos. This can be mounted using 2 M2.5 countersunk screws under the servo or using a couple tabs also for M2.5 bolts on either side (which can be snipped off with wire cutter if not used). The posts that hold the servo use M2 bolts where 8mm length is about right. If your printer can do small resolution the screw holes work fine off the printer but if not you can always drill them out. If you want to use 4-40 screws...
Topics: servo_holder, Servo_Mount, thingiverse, servo_sg90, Robotics, 9g_servo, stl
13
13
Jan 14, 2021
01/21
by
Christopher Kaufman (BaneofHam)
data
eye 13
favorite 0
comment 0
Model of the sv80 servo motor without any horn. Sizes have been tested and integrated in to other models already, but please let me know if you have any issues.
Topics: thingiverse, servos, stl, micro_servo, 9g_servo, Parts, servo_motor, servo
3
3.0
Apr 4, 2021
04/21
by
Jason Fitts (jayf636)
data
eye 3
favorite 0
comment 0
Cut to length for the number of servo wires you need to run in parallel. Use double sided tape (I use 3m grey) to stick where needed. Use on all RC applications including planes and heli's! Make that wiring mess neat and tidy! Props to Pauly for the idea!
Topics: thingiverse, servo holder, servo wire, 3D Printing, stl, servo, Servo lead holder, servo lead
7
7.0
Mar 2, 2021
03/21
by
Robin Galipeau (Mad_Gob)
data
eye 7
favorite 0
comment 0
This is for design purpose, printing it will not be that usefull. There are the files for fusion360 ant the stl.
Topics: hobby servo, servo, rc servo, thingiverse, stl, srvo_motor, servo motor, 1.5g_servo, Other
4
4.0
Mar 15, 2021
03/21
by
Paul Brownless (Pablo13)
data
eye 4
favorite 0
comment 0
Simple Bracket to mount a micro servo in a mini servo space. Quick print Photo's show a prototype with a slighty too tight slot, so cut off the top, this has been enlarged now V1,1
Topics: Servo_Mount, Servo_Adaptor, thingiverse, micro_servo, servo spacer, servo, R/C Vehicles, stl
6
6.0
Apr 20, 2021
04/21
by
l g (lmg1114)
data
eye 6
favorite 0
comment 0
This is a 20KG Servo DS3218MG servo I modeled. It is not 100% accurate but it is pretty close. I also attached a drawing of it so you know the dimensions.
Topics: thingiverse, high torque servo, servo motor 20kg, stl, arduino high torque, Electronics, servo,...
2
2.0
Dec 14, 2021
12/21
by
Taras Kushnirenko (Kushnirenko)
data
eye 2
favorite 0
comment 0
## Servo Frame Used for install sero in the wing RC plane. ## 2 version - Frame-Cust.scad - for customizer - Frame.scad and S-*.scad - servo parameters in the included file
Topics: RC_plane, servo_holder, stl, servo_frame, micro_servo, thingiverse, servo_sg90, R/C Vehicles,...
5
5.0
May 1, 2021
05/21
by
Tokyo Bird (Tokyo_Bird)
data
eye 5
favorite 0
comment 0
【Lego compatible simple SG90 servo motor bracket】 SG90サーボモーターを固定するためのシンプルなブラケットです。 動作確認やテスト等でサーボを動かす時に便利となります。 簡単に取り外しが可能でLEGO互換取り付け穴がありLEGOシリーズと組み合わせることも出来ます。 【Google Translation】 A simple bracket for fixing the SG90 servo motor. This is convenient when moving the servo for operation check or...
Topics: stl, Servo_Mount, servo_motor, 9g_servo, servo_sg90, arduino, sg90_servo, sg90, servo, thingiverse,...
4
4.0
Jun 7, 2021
06/21
by
Victor L (OverlordSurge)
data
eye 4
favorite 0
comment 0
I haven't come across any brackets for micro-servos, so I drew from the thing I remixed and created my own using measurements from one of my servos and half a day's worth of trial and error. This does not have preprinted drill holes. The next version will hopefully include those and further adjustments. Included are two 3D models, one of the main bracket ("servo bracket.stl") and the servo mount that holds the servo in place ("servo bracket pt2.stl"). The main bracket has...
Topics: micro_servo, Robotics, 9g_servo, thingiverse, stl, servo
3
3.0
Jan 4, 2021
01/21
by
Simeon Baltadziev (saimun1)
data
eye 3
favorite 0
comment 0
This remix works properly. The gears are moving smoothly and precisely. It's strong. Problems solved: - gear teeth - rack size so it can be stable and rigid(it enters a bit hard, you may have to saw it 1-2 times!) - servo position, now the pinion doesn't skip steps
Topics: stl, servo, servo_motor, 9g_servo, thingiverse, Electronics
0
0.0
Aug 13, 2022
08/22
by
Carl Sutter (CARLS_3D)
data
eye 0
favorite 0
comment 0
A bracket to hold a mini sized servo horizontally. This one has larger blocks for the screws to prevent them from tearing out or breaking the plastic. I used M2x8 washer head screws to hold the servo and to screw the bracket down - the same that typically come with the servos. https://www.amazon.com/gp/product/B07Q37G667?ie=UTF8&psc=1&linkCode=sl1&tag=3dthing-20&linkId=bbb40f69681f8a680f12d1e93dbf40b5&language=en_US&ref_=as_li_ss_tl
Topics: Servo_Mount, mini servo, stl, thingiverse, micro servo, Robotics, servo
7
7.0
Jun 20, 2021
06/21
by
Dr Qz (dqd)
data
eye 7
favorite 0
comment 0
Hey guys ! This is a servo 9g motor CAD I used my vernier calipers to get as accurate a CAD as possible Enjoy !!
Topics: 9g_servo, servo_sg90, Servo_Mount, thingiverse, Tower_Pro_SG90, servo_motor, servo, Electronics,...
10
10.0
Jan 14, 2021
01/21
by
Alex ss (sa64)
data
eye 10
favorite 0
comment 0
Servo ~ MG90 holder with a bearing for folk serv. Need a bearing outside diameter 7mm, an elongated screw. On the rocker, the play is removed. STL Improved than in the photo...Weight 1.7 grams Added option with a cover donate zav6402@gmail.com PayPal my page: https://sites.google.com/view/hobbiesforhobbiesandlife
Topics: thingiverse, Electronics, stl, Servo_Mount, SERVO BEARINGS, servo
3
3.0
May 20, 2021
05/21
by
Matilde Cedenilla (matitecno)
data
eye 3
favorite 0
comment 0
Soporte para servo motor.
Topics: thingiverse, servo_motor, Robotics, soporte servo, stl, servo
2
2.0
Jan 18, 2022
01/22
by
Tokyo Bird (Tokyo_Bird)
data
eye 2
favorite 0
comment 0
【SG-90 Micro Servo Horn with Gears】 SG-90やMG90、MG92などのマイクロサーボ用のサーボホーンです。 SG-90にはヘッドに21枚歯のギアが付いています。 上手く機能するようにサーボホーン側のギアを調整しています。 私が使っている3Dプリンター(Ender3 V2やArtillery Genius)で最適化しています。 ギアが滑るなどの場合、適切なスケーリングによりうまく機能してくれると思います。...
Topics: thingiverse, servo_sg90, 9g_servo, Hobby, sg90, micro_servo, stl, servo
6
6.0
Jan 21, 2021
01/21
by
Jack Randolph (TechJack)
data
eye 6
favorite 0
comment 0
Here is a servo mount i made for one of my model airplanes. Its a way to glue your servos but not the servos themselves. -Notes 1) Scale this 102%, if its still really tight then make it 105%. 2) Remove the bottom of your servos, its as easy as unscrewing 4 screws and taking the end off. Then put the screws back in but but not the back. 3) If you have any problems please let me know i'm more than happy to help!
Topics: Mechanical Toys, Plane Servo Holder, servo, Servo_Mount, Tower Servo, thingiverse, Mini Servo, Car...
9
9.0
Apr 24, 2021
04/21
by
James G (Jimbotron)
data
eye 9
favorite 0
comment 0
(Update: 3/24/2017 - I made the design a bit stronger by adding curved edges. The right angles I originally had was a newbie mistake that I've been wanting to get around to fixing.). This is a clamp that holds a 9g micro servo to a table or desk surface. This is great for STEM projects or debugging your servo control software. Equipment needed: a 4 inch long 1/4 inch diameter eye bolt with hex nut or suitable alternative. I bought mine at home depot for about $0.40 each. Print Instructions: No...
Topics: 9g_servo, robotics, Servo_Mount, stem, stl, micro_servo, servo, servo_holder, thingiverse,...
4
4.0
Mar 21, 2021
03/21
by
andrea gambacorta (mafaldo)
data
eye 4
favorite 0
comment 0
Fit perfect for servo 17g like HiTEC HS-85BB or HobbyKing HK15148 No glue need See also https://www.thingiverse.com/thing:925062
Topics: stl, servo_holder, Servo_Mount, servo_17g, servo, servo_mini, thingiverse, R/C Vehicles
9
9.0
Mar 10, 2021
03/21
by
James G (Jimbotron)
data
eye 9
favorite 0
comment 0
This is a 9g micro servo mount for flat surfaces. For example, I use this with an ultrasonic range sensor attached to the servo on my STEM roaming robot. The Servo mount is screwed (M2 screws) into a flat plastic plate that serves as the chassis of my robot. Print instructions: I've been using PLA, 0.15 rez Version 4: - added for better drop in and more secure fit. - printed right side up and allows for 2 screws to secure the servo in place. - supports may be needed. - added two extra screw...
Topics: Electronics, robotics, Servo_Mount, micro_servo, stl, thingiverse, 9g_servo, servo_holder
5
5.0
Mar 17, 2021
03/21
by
Michael Schuster (Mechanical_Leaf_Design)
data
eye 5
favorite 0
comment 0
This is my Servo Mount for Micro Servos. Its made for a Turnegy Micro Servo but should work with everything similar. Servo Size: 23X12.1X25.8mm Print it at 100% Infill or enought walls to be able to sand it down after instalation. There are no Holes includet so you can drill what ever fits your Servo.
Topics: Servo_Mount, micro_servo, stl, thingiverse, 9g_servo, R/C Vehicles, servo
4
4.0
Apr 15, 2021
04/21
by
andrea gambacorta (mafaldo)
data
eye 4
favorite 0
comment 0
For 9g servo like Tover Pro or Turnigy. To glue on depron or epp or wherever you like
Topics: micro_servo, 9g_servo, servo, thingiverse, stl, R/C Vehicles, Servo_Mount
3
3.0
Jan 6, 2021
01/21
by
Patrick Lavelle (NotLikeALeafOnTheWind)
data
eye 3
favorite 0
comment 0
A cord take up drum for a continues rotation servo with a t25 spline.
Topics: spline, stl, servo hub, servo, thingiverse, t25, servo horn, servo drum, Robotics
0
0.0
Aug 13, 2022
08/22
by
Marcel Sontrop (derDoc81)
data
eye 0
favorite 0
comment 0
Designed this to mount a micro/mini servo inside a R/C truck. The holes are made for M3 screws and a little hole to attache the servo. I printed in PETG but I think PLA should also be fine.
Topics: Servo_Mount, stl, thingiverse, mini_servo, micro_servo, R/C Vehicles, servo
9
9.0
Jan 17, 2021
01/21
by
Min-su Kang (BetaMan)
data
eye 9
favorite 0
comment 0
tongs for 9g mini servo
Topics: arm, servo, micro_servo, tongs, thingiverse, Micro_Servo_Arm, 9g_servo, Servo_Arm, DIY, stl
9
9.0
Apr 28, 2021
04/21
by
Manollo (Indigo4)
data
eye 9
favorite 0
comment 0
Simple servo arm with mount for another servo.
Topics: thingiverse, Gadgets, arm, servo_motor, Servo_Mount, micro_servo, robot, servo, arduino, stl,...
2
2.0
Apr 20, 2022
04/22
by
Gerrie de Jager (creatron1)
data
eye 2
favorite 0
comment 0
I tried to use Freecad parameters in Fusion360 but it did not work at all, and the Fusion360 remix source file was a step import with no ability to align, as it had x,y,& z offsets. Thus with trial and error I printer this on 'Ender 3' using CHEP 0.12mm (Best quality) to create my 'special' disk. Fusion360 -> utilities ->Add-ins->scrips&addins->SpurGear Properties: Pressure angle 32 Degrees, Module 0.255 (play with value, I started at 0.23 and printer up to 0.27), Teeth 20,...
Topics: thingiverse, Servo_Mount, 9g_servo, servo, stl, DIY
3
3.0
Mar 25, 2021
03/21
by
Alberto Tejada (Apeiron)
data
eye 3
favorite 0
comment 0
MG90S Microservo holder to place in a panel
Topics: stl, servo, mg90s_servo, thingiverse, servo_motor, mg90s, micro_servo, DIY
8
8.0
Apr 16, 2021
04/21
by
Paul Crouch (0utsider)
data
eye 8
favorite 0
comment 0
None of the existing servo brackets on Thingiverse quite met my needs so I made my own. Fits standard size servos with enough room to fit the cable through even allowing for ABS shrinkage and is thick enough for more heavy duty applications. I had issues previously with the center hole being too tight lengthwise, so moved the mounting holes apart slightly. It should still fit most standard size servos. See https://droidbot07.blogspot.com/search/label/Stewart%20Platform for more.
Topics: servo, servo_holder, thingiverse, Robotics, stl, Standard_Servo, vertical, Servo_Mount
12
12
Jan 10, 2021
01/21
by
Brayton Thompson (thompsbp)
data
eye 12
favorite 0
comment 0
Basic plate I used to adapt my CXN Designs Penguin Pod from a standard size servo to a micro size servo.
Topics: thingiverse, Electronics, stl, Servo_Mount, 9g_servo, servo
6
6.0
Jan 20, 2021
01/21
by
Amie DD (AmieDD)
data
eye 6
favorite 0
comment 0
Micro Servo Wing SG92R Horn ===== Replacement wing for [SG92R Micro-Servo](https://www.adafruit.com/product/169)
Topics: hybrid world, servo, servo piece, micro servo parts, thingiverse, servo replacement, Robotics,...
12
12
Jan 18, 2021
01/21
by
Sir Vanny (Vanny)
data
eye 12
favorite 0
comment 0
Modell of 9g Servo for modelling. I don´t see a need to print it but do what you like :P Find STL and STEP.
Topics: Electronics, servo, micro_servo, thingiverse, 9g_servo, stl
4
4.0
Mar 5, 2021
03/21
by
James Thompson (thomps38)
data
eye 4
favorite 0
comment 0
This is just a quick servo mount I did for a class project. Nothing fancy. The servo was to control the throttle on a small gas engine, but couldn't find a good mounting spot, so I made a general purpose one I could screw into anything. The holes are for 3mm screws. I used self taping screws, but will allow any 3mm screw to work. And there are plenty of holes so you can use as many screws as you feel you need and where you need them. Feel free to remix this as you want.
Topics: servo_mount, stl, servo_mount_frame, servo_bracket, Electronics, servo, thingiverse
9
9.0
Jan 19, 2021
01/21
by
Mark Johnston (mjstn2011)
data
eye 9
favorite 0
comment 0
This is a bracket that holds a popular mini-servo used in robotics or other electro-mechanical uses such as the Tower Pro MG90 or MG90S. This holds a Tower Pro MG90S all metal gear servo (and others in this standard size) and the base plate if rotated will rotate the servo drive sprocket centered on rotation of the base plate. Note that this version does not allow servo to be screwed into this mount because in my usage I attach a part of a robot arm to the servo itself. This bracket holds in...
Topics: servo_holder, servo, servo_bracket, mini_servo, mg90, Servo_Mount, thingiverse, robotic_gripper,...
3
3.0
Jan 15, 2021
01/21
by
kyle moran (sus_pants)
data
eye 3
favorite 0
comment 0
This is a MG996R servo base. It has 4 holes that are 3mm(on paper, 2.6mm irl) inner diameter. My first object so ¯\_(ツ)_/¯
Topics: thingiverse, stl, 60g servo, Servo_Mount, Robotics, servo
3
3.0
Jun 21, 2021
06/21
by
Strawbees HQ (StrawbeesHQ)
data
eye 3
favorite 0
comment 0
Set of Strawbees servo motor mounts to snap onto constructions.
Topics: Servo_Arm, Servo_Mount, thingiverse, servo, Servoarm, stl, Parts
7
7.0
Jan 20, 2021
01/21
by
WISP DRONE (wispdrone)
data
eye 7
favorite 0
comment 0
servo brackets
Topics: servo, servo_bracket, Servo_Mount, thingiverse, 3D Printing, stl
9
9.0
Jan 14, 2021
01/21
by
Mateus Pereira (MateusOP)
data
eye 9
favorite 0
comment 0
Servo extension. Please note you have to have the original servo horn. This extension is 25mm long, from servo axis center to joint axis center. I did not designed the servo attachment, you gave to glue it into an original servo horn. This is the way I needed to create it.
Topics: thingiverse, stl, Servo_Arm, servo_horn, horn, arduino, 9g_servo, Robotics, Horns, servo
4
4.0
Apr 8, 2021
04/21
by
Bill Elwell (welwell)
data
eye 4
favorite 0
comment 0
Servo bracket designed specifically for the TowerProMG90S mini servo. Print with 100% infill, then drill the holes.
Topics: servo, Servo_Mount, srv, Robotics, stl, thingiverse, servo_holder
