3
3.0
Jun 7, 2021
06/21
by
Nico Wibowo (Heato)
data
eye 3
favorite 0
comment 0
This is relay module 4 channel with din rail mounting
Topics: din_rail_relay_module, thingiverse, relay_module, stl, Electronics, Din_Rail_mount
3
3.0
Jan 5, 2021
01/21
by
Kevin G (yaikou)
data
eye 3
favorite 0
comment 0
This housing will keep the relay board enclosed while still providing access to the screws in the terminal as well as the terminals themselves. For use with these: https://www.amazon.com/gp/product/B07WP7C8ZD/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Topics: relay_module, optoisolated, stl, thingiverse, electronics, Electronics
6
6.0
Mar 2, 2021
03/21
by
Kolec kolczan (Kolec)
data
eye 6
favorite 0
comment 0
Nano + Relay Module
Topics: thingiverse, stl, Electronics, Arduino_Nano, Relay module
2
2.0
Nov 8, 2021
11/21
by
Ernestas Moliušis (morphxp)
data
eye 2
favorite 0
comment 0
Recently I started create my own floor heating control system. I dont found simple box for Pi Zero and 4 relay module, so I created one. Print time with my settings ~7 hours 30 mins. Recommend supports for cable ports. I will create cover soon too.
Topics: stl, Raspberry_Pi_Zero, 4_relay_module, thingiverse, Electronics
3
3.0
Mar 26, 2021
03/21
by
Howard Rider (Desdinova_)
data
eye 3
favorite 0
comment 0
Box for Wireless Relay Module purchased on Amazon. Lid is press fit. It's a simple design. Just heat stake the board in place. I'm good at driving off and leaving the garage door open, so I put in a wyzecam to check on it and this relay so I can close the door remotely. Link to relay below: https://www.amazon.com/Sonoff-Wireless-Automation-Modules-Compatible/dp/B07F6YZXST/ref=sr_1_36?crid=CN59S6NNZ5ZP&keywords=inching+relay&qid=1573954132&sprefix=inching%2Caps%2C144&sr=8-36
Topics: stl, Relay_Case, wireless relay module, thingiverse, sonoff_enclosure, DIY, Ewelink
3
3.0
Jun 19, 2021
06/21
by
Christoph Schwarzenberg (ChrisSzb)
data
eye 3
favorite 0
comment 0
Hi folks, I have created a cover for the 4-Relay Module from Elegoo for a hobby project. Maybe someone else can use it. If you set the upper and lower thickness at housing to 0, the infill pattern comes out. Then it will look the same for you. This may allow a good cooling and it looks great. Have fun printing.
Topics: Arduino_case, Elegoo_Relay_Module, Relay, thingiverse, 4-fach, Elegoo, Kasten, Kiste, Electronics,...
3
3.0
Oct 15, 2021
10/21
by
Bjarne Traeholt (Treholt)
data
eye 3
favorite 0
comment 0
2-relay modul case for 35mm DIN rail mount
Topics: thingiverse, relay, stl, mount, Electronics, ssr, case, DIN, arduino, 2_relay_module
8
8.0
Jan 17, 2021
01/21
by
Stevie Ray (Old-Steve)
data
eye 8
favorite 0
comment 0
My 4 channel relay box. I made this box to enclose my 4 ch relay module that is running some of my Christmas lights. I have a box, a lid, and a shelf. The box has a hole on the left side for wires. I have 4 small square holes for the relay LED's. There are 4 holes on the back side for the relay wires. The holes are only big enough to access the common and normally open contacts. There is also room for an Arduino Nano inside. R1 Revision I bought another 4 ch relay board and noticed that my LED...
Topics: Electronics, arduino_relay, 4_Channel_Relay, thingiverse, relay_module, Arduino_Nano, stl
6
6.0
Apr 20, 2021
04/21
by
glassy (glassy)
data
eye 6
favorite 0
comment 0
This is a light mount-frame-plate for the popular relay module. Two variations. Though the module fits tight in the frame it can be additionally secured by melting tops of the pins with the hot tool (i.e. soldering iron). If you found my design useful or inspiring and would like to buy me a cup of espresso you are welcome to tip me: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=U25V96GZNVL3N&source=url Thank you!
Topics: thingiverse, mount_frame, stl, Electronics, arduino, relay, relay_board_mount, mount, relay_module
5
5.0
Mar 16, 2021
03/21
by
Kibs Zaych (LorDXEO)
data
eye 5
favorite 0
comment 0
Topics: lerdge_relay, thingiverse, relay_module, relay_board_mount, stl, 3D Printer Parts, lerdge
4
4.0
Mar 13, 2021
03/21
by
MARCO PIZZAMIGLIO (NamorIt)
data
eye 4
favorite 0
comment 0
3D model of a 4 channel relay module for Arduino / Raspberry
Topics: thingiverse, arduino_module, arduino_relay, stl, arduino, Electronics, 4_Channel_Relay, relay_module
9
9.0
Jan 15, 2021
01/21
by
Anhtien Nguyen (anhtien)
data
eye 9
favorite 0
comment 0
It's a long name but it has multiple uses: cooling down the AC/DC power supply, switching on/off the AC/DC power supply remotely. It is also a Raspberry Pi / Relay Module case. You can refer to the included connection diagram to see how things are connected inside this case. Hardware: 1. Raspberry Pi with Octoprint preloaded and ready to be accessed from a Web Browser. If not, search online to see how to set it up. 2. A relay module, one channel is good for this purpose but I have 2 channel...
Topics: power_supply_cover, thingiverse, relay module, stl, 3D Printer Accessories, raspberry_pi_case
5
5.0
Mar 5, 2021
03/21
by
Jan Ka (BasementEngineering)
data
eye 5
favorite 0
comment 0
This is a relay box for 1 channel relay modules such as [this one](https://s.click.aliexpress.com/e/cfqvVNhe) To assemble it, you will need four 18mm M3 machine bolts. Hook up the AC side of the relay module, clip it into the bottom portion and screw the top piece in place. Now you can hook up some jumper wires from the outside and you are good to go. I uploaded two Versions of the top piece. One with an Inlay and one without. If you want to print two colors with a single extruder printer, like...
Topics: dual_color, stl, relay_box, relay_enc, relay_module, Electronics, Relay, Two_Color, thingiverse
Watering is the most important cultural practice and most labor intensive task in daily greenhouse operation. Watering systems ease the burden of getting water to plants when they need it. Knowing when and how much to water is two important aspects of watering process. To make the gardener works easily, the automatic plant watering system is created. There have a various type using automatic watering system that are by using sprinkler system, tube, nozzles and other. This system uses Arduino...
Topics: Information Technology, Automatic Plant Watering System, Arduino UNO board, relay module, power...
4
4.0
Mar 13, 2021
03/21
by
MARCO PIZZAMIGLIO (NamorIt)
data
eye 4
favorite 0
comment 0
3D model of the 2 channel relay module for Arduino / Raspberry
Topics: thingiverse, arduino_module, 2_Channel_Relay, Arduino_shield, relay, stl, arduino, Electronics,...
4
4.0
Apr 1, 2021
04/21
by
Dorian Grey (DorianGrey)
data
eye 4
favorite 0
comment 0
This is a simple housing for a 2-relais module and a LVM2596 voltage converter. There are many almost identical versions of those relais modules, emphasize almost. Mine has tongling as the manufacturer and has the screw holes in a rectangle of 46x33mm. An extra screw hole is there to fix a luster terminal (screw joint with isolation to connect inner and outer cables) and the box has some 'empty' room for cables and wires. Everything gets screwed in with M3 4 or 6 mm screws. The box has 2 large...
Topics: LVM2596, thingiverse, Electronics, relay, freecad, relais, stl, tongling relay modul, 2 relay...
8
8.0
Jun 20, 2021
06/21
by
ENG Build (EngBuild)
data
eye 8
favorite 0
comment 0
Updates: Mounting holes re-aligned -------------------------------------------------------------- -------------------------------------------------------------- 2 Channel Relay Din mount. Economical design with fast print time Relay I am Using Like share follow and don't forget to post a picture if you make one THANKS! ----------------------------------------------------
Topics: RaspberryPi, 2_Channel_Relay, thingiverse, arduino_relay, DIN, relay, relay_module, arduino,...
4
4.0
Mar 22, 2021
03/21
by
Lukáš Malatinský (luckyx182)
data
eye 4
favorite 0
comment 0
Remix of https://www.thingiverse.com/thing:2320216. Inside this case there is mount for relay: https://www.amazon.com/HiLetgo-Channel-Latching-Bistable-Control/dp/B00LW2VLS0 If you like my design like this, follow me, tip me or check out my other designs. Cheers!
Topics: Anet_A8, stl, case, anet_a8_upgrade, relay module, power supply, 3D Printer Parts,...
This paper investigates based on Raspberry PI based home appliances control system using microcontroller system. The paper proposes to control home appliances remotely using smart phone. In this paper, Raspberry Pi is used as a sever for connecting to Arduino microcontroller by sending string signal character from user. When Raspberry Pi received string data that sending via web control page and then transmit that string data to Arduino passes through logic level converter. Logic level...
Topics: Electronics & Communication Engineering, Raspberry Pi, Router, Arduino UNO, Gear motor, L298N...
3
3.0
Mar 25, 2021
03/21
by
Evg 33 (Evg33)
data
eye 3
favorite 0
comment 0
upd: new model for SKR Relay Module v1.2: https://www.thingiverse.com/thing:4157233 Держатель релейного модуля от SKR для 3d принтера UNI. Крепится к винтам левого держателя катушки. 2 винта надо будет поменять на M3-35. В комплекте шайбы (проставки) цилиндрические и конусные.Они закрывают гайки, которыми держатель...
Topics: stl, SKR, UNI_3d_printer, uni3d, thingiverse, module, BIGTREE, uni_3d, 3D Printer Parts,...
3
3.0
Jun 10, 2021
06/21
by
Jan de Valua (steelpuxnastik)
data
eye 3
favorite 0
comment 0
Raspberry Pi 3 A+ with 30A relay module case to use with Octoprint and to mount everything on printer (in my case on PSU). On the cover of case can be mounted 40mm fan.
Topics: case, raspberry_pi_case, relay_module, thingiverse, Raspberry_Pi, relay, Octoprint,...
4
4.0
Apr 1, 2021
04/21
by
Evg 33 (Evg33)
data
eye 4
favorite 0
comment 0
SKR Relay Module holder for UNI 3d printer. Shop: http://ali.pub/4gyo3b Docs: https://github.com/bigtreetech/BIGTREETECH-Relay-V1.2 Old version for BTT Relay 1.0: https://www.thingiverse.com/thing:3901221 Обсуждение тут или в http://uni3d.store/viewtopic.php?f=33&t=174
Topics: UNI_3d_printer, thingiverse, bigtreetech, 3D Printer Parts, relay, UNI, uni-3d.ru, relay module,...
Topics: electronics, cable, free, sale, digital, mhz, stereo, fmx, signal, power supply, test equipment,...
735
735
texts
eye 735
favorite 1
comment 0
Linux Journal 2015 05
Topics: linux, django, data, raspberry, journal, websocket, migrations, code, automation, script, linux...
1,016
1.0K
texts
eye 1,016
favorite 0
comment 0
Hewlett-Packard Journal Vol. 43 No. 2 (1992-04)(Hewlett-Packard)
Topics: vxibus, instrument, test, module, timing, data, signal, interface, relay, tlie, peak power,...
