Topics: manualzz, manuals, Yamaha, KB45 MKII Keyboard Bag, KB45 MKII, YFP-70, Chord, KB48S MKII Keyboard...
Arturia MiniLab MkII user manual.
Topic: Arturia MiniLab MkII
13
13
Jan 10, 2021
01/21
by
Cory Schmidlin (Doober)
data
eye 13
favorite 0
comment 0
I made this to couple together the base and a 1-1/2" PVC pipe for the tower of my MKII 5W Wind Turbine. I left the hole through the middle to save material, print time and so you can route the wires out the bottom of the tower. Find the turbine here: http://www.thingiverse.com/thing:2060281 In case you want to use it for something else, it is 2.01" outside diameter on the large end, and 1.5" outside diameter on the small end. and 3-7/8" tall EDIT: I printed my first one out...
Topics: thingiverse, MKII Turbine, stl, wind turbine, DIY, MKII, Coupler, turbine
Topics: manualzz, manuals, AVN2210p mkII, Eclipse user manuals, Eclipse service manuals, AVN2210p mkII pdf...
Topics: manualzz, manuals, Nio MKII, Barco user manuals, Barco service manuals, Nio MKII pdf download, Nio...
Topics: manualzz, manuals, MKII, Comb Communications user manuals, Comb Communications service manuals,...
Topics: manualzz, manuals, 1968 MKII, Drawmer user manuals, Drawmer service manuals, 1968 MKII pdf...
Topics: manualzz, manuals, Scanmaster 2 MKII, SHOWTEC user manuals, SHOWTEC service manuals, Scanmaster 2...
Topics: manualzz, manuals, MAGIX V2000 MKII manual, V2000 MKII pdf download, V2000 MKII User guide, MAGIX...
Topics: manualzz, manuals, Aircommand, Cormorant MKII
4
4.0
Mar 5, 2021
03/21
by
Marco Reps (rreps)
data
eye 4
favorite 0
comment 0
This bracket adds stiffness to extended Cetus printers primarily, but it might also be beneficial to standard height models. It holds the sprag bearing on the motor shaft to slow down a falling print head. You have drill out 1 threaded M3 hole that was occupied by the rubber foot before. You might have to move the entire vertical aluminium extrusion slightly to get it to the correct height. Perform a bed calibration after installation. Additionally you need: * 3 M3 nuts DIN 934 * 2 M3x8 bolts...
Topics: stl, Cetus, Cetus3d, Cetus3d_mkii_extended, 3D Printer Parts, cetus3d_Mkii, thingiverse
Topics: manualzz, manuals, CFX12.mkII, Mackie
Topics: manualzz, manuals, ADJ DCD-PRO300 MKII manual, DCD-PRO300 MKII pdf download, DCD-PRO300 MKII User...
Topics: manualzz, manuals, DP-501 MKII WH, DP-501 MKII RW, DP-501 MKII AT, Hem­, ingway user...
Topics: manualzz, manuals, HTS 5100 MKII, Monster Cable user manuals, Monster Cable service manuals, HTS...
Topics: manualzz, manuals, SFX-60 MKII, Mono Machines user manuals, Mono Machines service manuals, SFX-60...
Topics: manualzz, manuals, Comb Communications, MKII
Topics: manualzz, manuals, ADJ DCD-PRO310 MKII manual, DCD-PRO310 MKII pdf download, DCD-PRO310 MKII User...
Topics: manualzz, manuals, Unitech, MR350 MKII
Topics: manualzz, manuals, Rotel RB-976 MKII manual, RB-976 MKII pdf download, RB-976 MKII Owner`s manual,...
Topics: manualzz, manuals, Puch Magnum II MKII manual, Magnum II MKII pdf download, Magnum II MKII Service...
Topics: manualzz, manuals, C7 Rapide MKII, 3540.D, Ronda user manuals, Ronda service manuals, C7 Rapide...
4
4.0
Apr 20, 2021
04/21
by
Peter Schmelcher (peter120)
data
eye 4
favorite 0
comment 0
Improved design see: https://www.thingiverse.com/thing:3586841 Works much better than the original Cetus part. This clamp design incorporates more degrees of freedom to compensate for printer manufacturing tolerances which results in a more consistent clamping force. Equally important is this approach makes two threaded stepper holes free for a Z axis brace. The Z axis shakes whenever the extruder stepper motor is accelerated and the vibrations are frozen in the print surface. PLA makes a poor...
Topics: thingiverse, 3D Printer Parts, Cetus3d_mkii_extended, stl, Cetus_3D, cetus3d_Mkii, Cetus, Cetus3d
Topics: manualzz, manuals, Vermona PERfourMer MKII manual, PERfourMer MKII pdf download, PERfourMer MKII...
616
616
texts
eye 616
favorite 0
comment 0
Ruger P85
Topics: mkii, ruger, mki, spring, parts, pin, firing, pistols, magazine, safety, firing pin, mkii mkii,...
Topics: manualzz, manuals, Monster PowerCenter HTS1000 MKII manual, PowerCenter HTS1000 MKII pdf download,...
8
8.0
Jan 17, 2021
01/21
by
Thomas Kjeldsen (ThomasDK)
data
eye 8
favorite 0
comment 0
As the days have become increasingly darker, the LED on my Cetus seems to have become increasingly brighter, which distracts me when I'm sitting hypnotized in front of the printer. Therefore, I have designed this simple cover which acts as a diffuser. Link to editable file in Onshape: https://cad.onshape.com/documents/d1a4986d437bf94368912b2c/w/d3018fd5dd174aa40510aa2c/e/2041d7653bc3fd27b992cf0f
Topics: 3D Printer Accessories, thingiverse, Cetus3d, cetus3d_Mkii, Cetus_3D, Cetus, Cetus3d_mkii_extended,...
365
365
Nov 18, 2018
11/18
by
KORG
software
eye 365
favorite 0
comment 0
Firmware 1.03 for KORG D1200 mkII - This includes both the extracted archives, and the original archives.
Topics: korg, firmware, 1.03, d1200, mkii
Topics: manualzz, manuals, PM7400 MKII, APART
Topics: manualzz, manuals, RRC-1258 MkII(s), K3-Remote, Microbit user manuals, Microbit service manuals,...
Topics: manualzz, manuals, RRC-1258 MkII(s), Microbit user manuals, Microbit service manuals, RRC-1258...
Topics: manualzz, manuals, Mono Machines SFX-60 MKII manual, SFX-60 MKII pdf download, SFX-60 MKII User...
5
5.0
Apr 4, 2021
04/21
by
BenJ π (BenjiP)
data
eye 5
favorite 0
comment 0
Hello, I have made this sign for a touristic rallye, our crew has the number 5. I have also made a blank version if you want to put our own idea of logo on it. This part is an assembly of one body and three pins. I recommand to use glue for sticking the pins inside the body. Enjoy it !
Topics: thingiverse, stl, Automotive, mkII, vw_golf
9
9.0
Nov 30, 2021
11/21
by
(WyldTurkey)
data
eye 9
favorite 0
comment 0
This is simply an extension of the original rifling mandrel given in the FGC9 MKII files. I have had good preliminary results with making my own barrel, however I have not had the chance to use it. I produced this in a way where the twist rate along the mandrel changes every 10mm to produce the progressive twist, with the last 30mm of wiring being at a 1 in 10 twist rate. At the ends of each piece there are two holes that are 30mm deep each meant specifically for 3D printing filament. This will...
Topics: fgc-9, 3D Printing, fgc9mkII, FGC9 MKII, fgc9_mk2, thingiverse, stl, FGC-9 MKII, fgc9
Topics: manualzz, manuals, Audible Technologies PLINIUS 8200P MKII manual, PLINIUS 8200P MKII pdf download,...
8
8.0
Jan 21, 2021
01/21
by
Brian Mulisano (SyntaxGeek)
data
eye 8
favorite 0
comment 0
This is a remix of AntoLeds amazing Simplify3d profile for the cetus3d mk2. I've only included the 0.2mm and 0.6mm profiles only as AntoLeds 0.4mm profile is great as-is. Stl file, like AntoLeds, is just for site policy requirements. These two new profiles have been tested with epic results but the same advice from AntoLeds original thing remains, calibrate the extrusion multiplier for your printer. Also, make sure to adjust starting script and gcode tabs in Simplify3d for your z offset as mine...
Topics: cetus3d, thingiverse, fff, cetus3d_Mkii, fff-file, Cetus3d_mkii_extended, simplify3d, 3D Printing,...
4
4.0
Mar 8, 2021
03/21
by
Peter Schmelcher (peter120)
data
eye 4
favorite 0
comment 0
Improved high performance clamp with smooth friction adjustment. Aug 9 2019: Added a reverse flexture socket feature. This geometry tends to seat the sprag bearing better. Added clearance on the back side of the ball part to better seat the sprag bearing (minor interference eliminated). (Added a flexture feature version to the socket part to allow some in-out movement) The problem source is the axis of the Z stepper motor shaft and the axis of the outside diameter of my sprag bearing are not...
Topics: Cetus3d_mkii_extended, stl, thingiverse, 3D Printer Accessories, Cetus3d, cetus3d_Mkii, Cetus,...
Topics: manualzz, manuals, Monster Cable HTS 5100 MKII manual, HTS 5100 MKII pdf download, HTS 5100 MKII...
6
6.0
Apr 20, 2021
04/21
by
Alex Kuhl (SVTF119Z)
data
eye 6
favorite 0
comment 0
SHORTENED ADAPTER IN VARIOUS LENGTHS FOR THOSE WHO DON'T WANT PIC RAILS ON THEIR AIRSOFT PISTOL. THE .75" LENGTH GOES RIGHT TO THE END OF THE INNER METAL BARREL HOUSING. DEPENDING ON THE MUZZLE DEVICE, YOU MAY NEED A SHALLOWER LENGTH FOR FULL INSTALLATION. THE G&P MOCK SUPPRESSORS NEED A SMALLER LENGTH.
Topics: thingiverse, stl, KJW, airsoft, Sport & Outdoors, MKii
5
5.0
Mar 17, 2021
03/21
by
Alex Kuhl (SVTF119Z)
data
eye 5
favorite 0
comment 0
Thread adapter that replaces the outer barrel on KJW MKII airsoft pistols. Allows for the mounting of picatinny accessories and typical airsoft muzzle devices with 14mm negative threads. Dimensions are tight from my printer with minimal filing needed depending on how removable you want this to be.
Topics: airsoft, KJW, Sport & Outdoors, stl, MKii, thingiverse
4
4.0
Apr 20, 2021
04/21
by
YANN RAVALET (Z0r4n)
data
eye 4
favorite 0
comment 0
a canon for the scout MKII to turn it into a laspistol from wh40k. needs some trimming on the orginal shell
Topics: thingiverse, stl, laspistol, nerf, scout mkII, Props
Topics: manualzz, manuals, V2000 MKII, American Audio
5
5.0
Mar 9, 2021
03/21
by
Etienne Baltazar (baltazed)
data
eye 5
favorite 0
comment 0
Original part from Cetus MKII, slightly improved for durability I printed the part in PETG but PLA could work too with 100% infill (and good PLA filament). Print it as it comes on the slicer plate with supports Use the original screws to fasten the bracket to the nema motor and tighten the bearing (as in the pictures)
Topics: bearing, Cetus3d_mkii_extended, stl, thingiverse, friction, belt, Cetus3d, cetus3d_Mkii, bracket,...
4
4.0
Mar 31, 2021
03/21
by
Ryan Mast (RyanTheMast)
data
eye 4
favorite 0
comment 0
Stls taken from: https://www.cetus3d.com/product-category/cetus-official-products/ All credit to Jason Wu, Cetus3d, and Tiertime, these are not my files just trying to make them easier to find as the question of where to find the replacement parts or stls for reference to make upgrades for Cetus comes up a lot in forums. * Of note while curating these from cetus between the different models they had offered a lot of parts that sound the same and have the same file size (as most parts from mk2...
Topics: Cetus, Cetus_3D, tiertime, thingiverse, 3D Printer Parts, mkIII, cetus_mk2, cetus3d_Mkii,...
3
3.0
Mar 25, 2021
03/21
by
BenJ π (BenjiP)
data
eye 3
favorite 0
comment 0
Hello, I have made this sign for a touristic rallye, our crew has the number 5. I have also made a half-life version and a blank version if you want tu put our own idea of logo on it. This part is an assembly of one body and two pins. I recommand to use glue for sticking the pins inside the body. Enjoy it ! if you are looking for other vw parts, check this link: https://www.thingiverse.com/benjip/collections/vw-parts
Topics: stl, thingiverse, volkswagen, vw_golf, Automotive, MKii
10
10.0
Jun 11, 2021
06/21
by
(PaleAle)
data
eye 10
favorite 0
comment 0
Summary my variant added an updated file Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.06 Infill: 100% Filament: amazon basic pla
Topics: mad cat mkii, mwo, thingiverse, battletech, stl
3
3.0
Mar 18, 2021
03/21
by
Johannes Osterberg (multitror)
data
eye 3
favorite 0
comment 0
I need this for the Tinyfab Kit
Topics: cetus3d_Mkii, thingiverse, 3D Printers, Cetus3d, stl
9
9.0
Mar 18, 2021
03/21
by
Francesco Pessolano (fpex73)
data
eye 9
favorite 0
comment 0
This is a simple part that can be used to better lock the hot end cable of the prusa i3 MKii in order to make sure it is sensibly higher than the bed. The extended version covers somewhat on the Z axe frame for a different look.
Topics: cable_holder, prusa, stl, MKii, thingiverse, Other
4
4.0
Mar 22, 2021
03/21
by
BenJ π (BenjiP)
data
eye 4
favorite 0
comment 0
Hello, You will need a 12V DC Motor type 775 for this modification. You can have one for 6€ on amazon : https://www.amazon.fr/gp/product/B07RKS4PZS/ This is a 150w motor, the genuine is 120w. Firstly, you have to assemble the fan to the motor using the 'insert' part. This is a tight fit, you don't need glue, just push with little hammer or something else. Secondly, put the two shells around the motor, see the position of the picture, the motor connectors must be in front of you if not you...
Topics: volkswagen, stl, Automotive, 191959101, MKii, golf, thingiverse
Topics: manualzz, manuals, DCD-PRO310 MKII, American Audio
