4
4.0
Mar 15, 2021
03/21
by
Bản Nguyễn (ngocban2406)
data
eye 4
favorite 0
comment 0
Quick fix for those who have normal lead screw nuts, although there are other remixes that address this problem, if you have printed the part already, this is probably your time/ filament saver Nut outer diameter: 10mm Nut screw hole distance: 13.5mm Require: 2x6mm M3 bolt ( M3 hex head ) 2x20mm M3 bolt ( M3 hex head ) 4xM3 nut (for each side) make a duplicate, then mirror one
Topics: z_lead_screw, thingiverse, lead_screw_nut, 8mm_leadscrew, lead_screw_adapter, leadscrew, stl, 3D...
10
10.0
Mar 18, 2021
03/21
by
Abe (BoyDrone)
data
eye 10
favorite 0
comment 0
There seem to be some design flaws on the flsun printer and the lead screws aren't parallel to the rods, causing some pulsation in the x axis tension. One m4 screw can hold this in place on the 2020 aluminum extrusion.
Topics: lead screw support, lead_screw, thingiverse, lead_screw_adapter, 3D Printer Parts, stl
3
3.0
Jun 21, 2021
06/21
by
Shane Hooper (shanehooper)
data
eye 3
favorite 0
comment 0
Z-Axis lead screw nut mount to the WorkHorse 3D Printer https://www.thingiverse.com/thing:2764064
Topics: trapezoidal_leadscrew, lead_screw_nut, Leadscrew_Nut, thingiverse, leadscrew, 3D Printer Parts,...
3
3.0
May 20, 2021
05/21
by
(JRD)
data
eye 3
favorite 0
comment 0
I bought a linear lead screw motor that turned out to not include a lead nut, and it's not the usual Tr-type lead thread. It's sold on eBay as: "Nema 14 2 Phase 6 Wire Stepper Motor Long Linear Screw Shaft Stepping Motor" or "NEMA 14 35MM 2 Phase 6 Wire Stepper Motor 1.8 Degree 5mm shaft Long Linear Screw" or "Nema14 2-Phase Stepper Motor 1.8 Degree long linear Screw Shaft Stepping Motor" or "1.8 Degree Nema 14 2 Phase Stepper Motor Long Linear Screw Shaft...
Topics: leadscrew, thingiverse, stepper_motor, lead_screw, lead screw motor, DIY, stl
6
6.0
Mar 17, 2021
03/21
by
Steven Thomas (Schtimpy)
data
eye 6
favorite 0
comment 0
Support for the top of the Z lead screw on an Ender 3 3D printer. This is to prevent accidentally bending the lead screw by rotating it by hand unsupported. This is a new version of my earlier design with screw fixings https://www.thingiverse.com/thing:3355230, however the screw fix version interferes with the mounting bracket for an excellent filament guide. I therefore remodelled my push fit version https://www.thingiverse.com/thing:3358957 with a shortened mounting key to enable both the...
Topics: z_lead_screw, 3D Printer Accessories, creality_ender_3, Ender_3_pro, lead_screw_support, bracket,...
0
0.0
Aug 14, 2022
08/22
by
James Burroughs (JEBurroughs)
data
eye 0
favorite 0
comment 0
Z Axis Lead Screw Coupler 5mm to 8mm for Ender/ Aquila I found what I wanted here... https://www.thingiverse.com/thing:4150872/files ONLY to realize it was way too big after I printed it. It say's it's 5mm to 8mm but it's more like 6mm and 9mm, ANYWAY, I took the concept which is really cool and made it fit my Aquila. I just ordered a dual Z kit for my Aquilla ( Have one on my Ender 3 Pro), when it came it had the wrong size coupler so I went into recovery mode. Luckily having 2 printers I was...
Topics: 3D Printer Accessories, leadscrew, lead_screw, z_screw, stl, thingiverse, Lead_Screw_Coupling
11
11
Jan 18, 2021
01/21
by
Kim Nilsson (faekie)
data
eye 11
favorite 0
comment 0
I had the need for different nut mounts for my leadscrews on my custom D-bot. The D-bot nut mounts doesn't align with the motor mounts if they are mounted "on the same vertical surface". I.E. if both nut mount and motor mount have same z rotation. I designed new mounts that would align with my 3-leadscrew design using the remixed motor mounts from original D-bot: https://www.thingiverse.com/thing:2401504 According to my measurements it's 21mm from center of leadscrew to edge of...
Topics: 3D Printer Parts, lead_screw, thingiverse, lead_screw_nut_mount, leadscrew, dbot, stl
10
10.0
Jan 11, 2021
01/21
by
Petros Matsakos (Mach0gr)
data
eye 10
favorite 0
comment 0
The new Pursa i3 mk2 uses lead screws for Z-axis. If you download and print the mk2 version files, you will notice the lead screw nut is missing. The TR8x8 bronze nuts that you can find in relevant stores don't match the screw holes of the x-end parts. I spent a lot of time downloading and printing relevant nuts for the lead screw but with no fun as nothing would print to a nice fit with the leadscrew. I decided to designed one from scratch. After reading Wikipedia on Trapezoidal thread forms I...
Topics: TR8x8, thingiverse, stl, lead screw nut, 3D Printer Parts, lead_screw, prusa_i3_mk2
8
8.0
Jan 16, 2021
01/21
by
Andreas Chatzichalkias (Andreascha78)
data
eye 8
favorite 0
comment 0
This is a Low profile Lead screw nut mount. My previous design did work but with this one you will go as closer to the Z axis as possible and look low profile too! On the bottom there are inserts for M3 lock nuts so you wont need to bother with tightening much. Dimensions: Width: 38.00mm Length: 24.00mm Height: 20.00mm Needs: 2 x 25mm M5 Low profile screws 2X 20mm M3 Cap head screws 4X M3 Nylon insert hex lock nuts P.S. I am finalizing my two piece anti back lash version that requires two nuts...
Topics: 3D Printer Parts, lead_screw, lead_screw_nut_mount, thingiverse, 2020_extrusion, stl, openbuilds
5
5.0
Apr 1, 2021
04/21
by
william tremblay (Tiwill345)
data
eye 5
favorite 0
comment 0
This is a little handle/crank for turning your lead screw without pain ! it's compact and fits tight spaces. it fits into the perimeter of a nema 17! Pretty useful for me. The print is one pieces and need support. It also need 1x M3 nut ans 1x M3x8 screw. Enjoy!
Topics: lead_screw, screw, 8mm, crank, rod, handle, rotate, 8mm_rod, stl, cnc, turning, knob,...
0
0.0
Aug 14, 2022
08/22
by
(FiveNights)
data
eye 0
favorite 0
comment 0
Enjoy
Topics: T8 Lead Screw, Lead Screw Nut, photon mono x, Lead Screw, 'photon, stl, 3D Printer Parts,...
10
10.0
Jan 11, 2021
01/21
by
JamesK R3d (JamesK1)
data
eye 10
favorite 0
comment 0
Slightly modified version of the original - http://www.thingiverse.com/thing:2008919 Requires 608 Skateboard Bearings and M4 nut and screws.
Topics: z wobble, thingiverse, 3D Printing, stl, flsun, lead_screw, lead_screw_bracket, flsun_i3
9
9.0
Jan 17, 2021
01/21
by
Andreas Chatzichalkias (Andreascha78)
data
eye 9
favorite 0
comment 0
This is an anti back-lash nut mount for 2020 aluminium rail or wherever. It requires two lead screw nuts and one spring. In addition to that you will also need 2 x 25mm M5 Low profile screws 4X 10mm M3 Cap head screws 4X 30mm M3 Cap head screws 4X M3 Nylon insert hex lock nuts 1X 30mm PUSH SPRING 9,5mm inner diam. 11,5mm outer diam. I have printed these mounts and use them on one of my printer designs. The result is a tight nut, with no womble or play at all. By far the best-tightest-most...
Topics: 3D Printer Parts, anti-backlash, 3d_printer, lead_screw, thingiverse, lead_screw_nut_mount, nut, stl
14
14
Jan 10, 2021
01/21
by
Alexey Voronin (avoronin)
data
eye 14
favorite 0
comment 0
This should be filled with concrete and stell pile inserted into concrete with the bolt. Can be adjusted for varilous pipe sizes. I used PLA, 9 lines of brim and PVA glue on glass bed.
Topics: thingiverse, screw, stl, lead_screw, Machine Tools
12
12
Jan 18, 2021
01/21
by
Marc Beaulieu (marcbea)
data
eye 12
favorite 0
comment 0
After installing the original provided with the build I realized that my TR8 nuts were a little larger than BLV's and would not fit in the provide hole. As well I wanted to use the anti-backlash ones I had laying around so I increase the height of the mount to allow the TR8 nut to be installed so it can fit in between the extrusion slot. As well added M3 nut sockets to make for easier installation.
Topics: Lead Screw, 3D Printer Parts, stl, AM8_V-slot, thingiverse, lead_screw_nut_mount, AM8, BLV
4
4.0
Jun 11, 2021
06/21
by
(Eidetiken)
data
eye 4
favorite 0
comment 0
Summary I'm building a library of 3D Printer and CNC parts for Fusion 360 to include .f3d and .step files. Check my Designs for different parts.
Topics: thingiverse, fusion_360, lead_screw_nut, stl
9
9.0
Apr 24, 2021
04/21
by
1010011011 (1010011011)
data
eye 9
favorite 0
comment 0
UPDATED !!! This model is a Solidworks redesign / remix of IE_z_motor_mount_10mm_longer_25mm. The nut holder has two flavors (when things don't fit use the "edit" one). Previous model didn't fit on the MPCNC, so I added 4mm to the backplate of the lead screw nut holder. Therefore also the motormount needed an update. The lead screw needs two M3 x 30mm, four or eight M3 x 20mm. I added this extra nut to be able to get rid of most of the slack. The two M3 x 30mm are put in place so the...
Topics: MPCNC, lead_screw, 3D Printer Parts, Mpcnc_mod, stl, Z-mount, MPCNC_Add-On, M8 rod mod,...
This project is to fabricate a fixture which can be used to revolve and reciprocate the work piece for welding of cylindrical components. Typically, a welding of a cylindrical component involves rotating a large fixture mounted horizontally and the welding head performs the welding by moving in the horizontal axis. The drawbacks of this method are that it damages the welding cable upon the motion and the use of complex electrode feeding systems. This fixture eliminates those complications by...
Topics: Welding, lead screw, fixture, cylindrical work piece
10
10.0
Apr 27, 2021
04/21
by
Mete Yalabık (meteylbk)
data
eye 10
favorite 0
comment 0
T8 Lead Screw Top&Bottom Cover --------------------------------------------
Topics: thingiverse, stl, leadscrew, lead_screw, 3D Printing
10
10.0
Apr 23, 2021
04/21
by
Justin (technobabble)
data
eye 10
favorite 0
comment 0
*I HAVE NOT TRIED TO PRINT THIS, NOR TESTED FIT* 8mm Four-Start lead screw commonly used on 3D printers. Based on OpenBuild Parts Stores' specs. Let me know if it needs any adjustment
Topics: 3D Printer Parts, stl, lead_screw, thingiverse
10
10.0
Jan 18, 2021
01/21
by
Scratch (scratchhax)
data
eye 10
favorite 0
comment 0
This is a challenge my daughter and I made to create a 3d printer entirely from scratch and without buying anything. All of the parts are custom so I don't expect this will work for many other people, but I was very pleased with how quite and reliable this machine turned out to be. We had to use a lead screw on the Y axis because it's what we had and because the bed weighs about 4lbs, but with proper oiling and isolation between the aluminum parts, it's about the same volume as a Prusa MK2....
Topics: 3D Printers, lead_screw, 3d printer, thingiverse, stl
6
6.0
Mar 4, 2021
03/21
by
John Saunders (wjohnsaunders)
data
eye 6
favorite 0
comment 0
Warning: I have just realised that installing this on your Creality 3d printer will reduce the usable Z height available for printing. So be careful with the height of items you are printing! You probably want limit the Z axis to 25mm less than the specs. If you have a knob on your extruder you will have to limit it by more. On the Creality printers the lead screw that drives the Z axis is usually not supported at the top. I designed this adjustable support to fill that gap. The support takes a...
Topics: 3D Printer Parts, lead_screw, thingiverse, stl, Creality
6
6.0
Mar 4, 2021
03/21
by
Vanya Sergeev (sergeevio)
data
eye 6
favorite 0
comment 0
A demonstration of a lead screw machine. GitHub: https://github.com/vsergeev/3d-misc-projects/tree/master/lead-screw-demo Design on A360: https://a360.co/2O5kZ2h
Topics: Engineering, stl, leadscrew, lead screw, demo, demonstration, thingiverse
6
6.0
May 1, 2021
05/21
by
Jean-Luc Guillemette (jlguil)
data
eye 6
favorite 0
comment 0
This thing is made te remplace camo screw system. The original thing is made for regular 5,5 inches patio decking. But I had smaller planks so I redesigned it. If you use camo 1x, printed 3times, you can simply screw it on a 2x4 or other wood board according to the spacing you need, for the decking boards you have. But if your planks are 115mm (4,5 in) or 138mm (5,5 in) you can use the specific stl you need. You can also remix it as needed. Original camo :...
Topics: stl, Outdoor & Garden, screw, lead_screw, camo, thingiverse
4
4.0
Mar 20, 2021
03/21
by
John Christiansen (le_slash)
data
eye 4
favorite 0
comment 0
This piece fits ultimaker bed. replacing the ultimaker lead screw & bolt with a std. lead screw & nut. Print this piece and put nuts on top of it and Insert the piece in heatbed.
Topics: stl, ultimaker, 3D Printer Parts, lead_screw, thingiverse
4
4.0
Apr 13, 2021
04/21
by
Mike Kelly (mkelly)
data
eye 4
favorite 0
comment 0
This is a lead screw delrin nut adapter to work on the RoBo3D Printer. It uses the design as originated from kabe This allows this amazon sainsmart lead screw stepper motor, which measures in at 257mm lead length, to maintain the maximum robo3d build volume: http://www.amazon.com/SainSmart-Screw-Stepper-Printer-RepRap/dp/B00JTSEFQY Fits a 15mm diameter bolt pattern. Print with support. If you find the original file is too snug (Copied Kabe's dimensions) then the 27mm wide version might help
Topics: thingiverse, stepper_motor, lead_screw, adapter, autolevel, robo3d, stl, acme_rod, leadscrew, 3D...
7
7.0
Apr 19, 2021
04/21
by
Anhtien Nguyen (anhtien)
data
eye 7
favorite 0
comment 0
This is the hex screw bit (1/4 inch) with the 8mm hole, use it with the cordless electric screwdriver to move the z-rod T8 lead screw nut (or x carriage attached to the screw nut). If the number of sides is 6 for the rod holder then it becomes a nut driver bit. Otherwise, default is 64 for T8 rod holder. The height is applicable for the hex bit part and the rod holder part, so the real height is about double that. Printed using PLA, 40mms, 100% infill, and brim 10mm. Support not needed.
Topics: thingiverse, lead_screw, stl, 3D Printer Accessories, zRod
8
8.0
Jan 20, 2021
01/21
by
Mike Henderson (WuffyUnikitty)
data
eye 8
favorite 0
comment 0
I only had some standard lead screws and decided to remodel the X Idler and X motor mount.
Topics: 3D Printer Parts, lead screw, prusa, thingiverse, stl
6
6.0
Mar 17, 2021
03/21
by
Alex Tryout (workale)
data
eye 6
favorite 0
comment 0
The lead screw of the A8 anet finally without backlash. This video shows the backlash of the lead screw thread. https://youtu.be/8RmOZPGaDyk
Topics: Tr8x8_without_BL, anet_a8_TR8, anet_a8_upgrade, 3D Printer Parts, TR8x8, Lead_screw_TR8, stl,...
4
4.0
Mar 31, 2021
03/21
by
Steven Thomas (Schtimpy)
data
eye 4
favorite 0
comment 0
Support for the top of the Z lead screw on an Ender 3 3D printer. This is to prevent accidentally bending the lead screw by rotating it by hand unsupported. This is a new version of my earlier Z leadscrew support design https://www.thingiverse.com/thing:3358978 which was designed to be used in combination with the filament guide by Filboyt https://www.thingiverse.com/thing:2917932 and its derivatives. After using these in combination for a while I found that the mount for the filament guide did...
Topics: lead_screw, screw, creality, ender3pro, Creality_CR-10, 3D Printer Accessories, fliament guide,...
3
3.0
Mar 25, 2021
03/21
by
Jason Cundall (GreatOldOne)
data
eye 3
favorite 0
comment 0
Remixed lid and spacer for the ELS project, as the LED&KEY TM1638 module I purchased from eBay had different hole spacing. Also the LEDs along the top are too close to the 7 segments to allow the top mounting holes to align with the spacer. These parts fit this module: https://www.ebay.co.uk/itm/1X-8-Bit-Digital-LED-Tube-8-Bit-TM1638-Key-Display-Module-For-AVR-Arduino-T-A6B1/232998927941?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 All that has changed is that the LED...
Topics: stl, thingiverse, ELS, Electronic Lead Screw, Clough42, Machine Tools
7
7.0
Mar 18, 2021
03/21
by
Kyle Borth (Rabbit1210)
data
eye 7
favorite 0
comment 0
Replacement brackets for the top of the ADIMLab printer that support the lead screws. This bracket does NOT constrain the lead screws. These use rubber grommets that have the same inner diameter as the holes on the stock brackets, but because they're rubber they won't have that awful rattling noise. The somewhat odd shape make them very rigid even if you print in a material thats a little more flexible (like PETG) they should still be very solid. Each bracket takes the following grommet...
Topics: Bracket, 3D Printer Parts, stl, Lead Screw, thingiverse, adimlab
10
10.0
Apr 16, 2021
04/21
by
xavier a (xavan)
data
eye 10
favorite 0
comment 0
Lead screw diameter 5 mm P3steel hole diameter 10 mm
Topics: holder, lead_screw, P3steel, 3D Printer Parts, thingiverse, stl
9
9.0
Apr 30, 2021
04/21
by
(StokedGiraffe)
data
eye 9
favorite 0
comment 0
These brackets are designed to mount 8mm lead screws to the MakerFarm Pegasus. I have the 10" version with metal motor mounts and X-carriage, so I haven't been able to test it on other sizes, but looking at pictures it should work fine. I'd be interested to hear feedback though. I originally purchased the ACME Lead Screw Upgrade kit from Colin at MakerFarm but there were a few things I didn't like about it: 1. The provided nut blocks are very snug and don't spin easily, even after over a...
Topics: stl, pegasus, makerfarm, 3D Printer Parts, lead_screw, thingiverse
11
11
Jan 11, 2021
01/21
by
Stephen Brooks (steleebrooks)
data
eye 11
favorite 0
comment 0
The version of my frame does not have the tapered top support. I have remixed this part to fit.
Topics: P3steel, thingiverse, stl, 3D Printer Parts, leadscrew, lead_screw
6
6.0
Mar 18, 2021
03/21
by
wouter stad (Woutercity)
data
eye 6
favorite 0
comment 0
This is a printable leadscrew nut Tr16x4.
Topics: Acme, TR16x4, Lead nut, Trapezoidal, 16x4, Parts, Acme nut, stl, Trapezoidal nut, Lead screw,...
8
8.0
Apr 2, 2021
04/21
by
Marc Sulfridge (marcsulf)
data
eye 8
favorite 0
comment 0
This thing allows you to use 1/4" all-thread lead screws on the Prusa without modifying the X-ends. It adapts a standard SAE 1/4" nut to the 5/16" trap on the standard Prusa X-ends.
Topics: lead_screw, lead_screw_nut_adapter, leadscrew_adapter, openscad, leadscrew, nut_adapter, stl, 3D...
6
6.0
Mar 17, 2021
03/21
by
Pierre Adam (DontPanic57)
data
eye 6
favorite 0
comment 0
Theses parts are made to hold the lead screws on the P3Steel in place. The bearing can go over or under the metalic part depending of the clearance you have with your printer. The design has been inspired by this thing (https://www.thingiverse.com/thing:1841693). But has been entirely re-designed because theses files did not match my frame. The holes in the parts were about 5mm away from the actual holes. *Please check the dimentions of the arm on your printer !* A PDF is available on the files...
Topics: thingiverse, 3D Printer Parts, stl, lead_screw, P3steel, orballo
12
12
Apr 16, 2021
04/21
by
Pako Cosmos (magonegro)
data
eye 12
favorite 0
comment 0
This is an adapter to fasten the 8mm lead screw with a 608zz bearing leaning on the 8mm rod. It avoids the lead screw touching the steel chasis while the bearing keeps it free to rotate but fixed into position. It press fits on the 8mm rod for a tight fit like the 608zz. Maybe you will have to file it a bit, remember it's a tight fit. Has been working like charm for me since I installed it months ago. Recommended to print it on PLA, it won't have heat stress and rigidity is the goal here. As...
Topics: lead_screw, P3steel, 3D Printer Parts, thingiverse, stl, 608zz
9
9.0
Apr 17, 2021
04/21
by
Eric Albert (erickphd)
data
eye 9
favorite 0
comment 0
This is a drop-in replacement for the lead screw on a Sparkmaker SLA 3D printer. My unit had a brass nut and the fit was so sloppy that it jumped on the screw under load. Not good! I designed this nut as a replacement. The barrel is sized to fit snugly into the opening so that the nut is also stabilized by the walls of the head section and provides the full thread length used in the original brass nut. This nut was printed in HTPLA version 3 from ProtoPasta in solid fill on a FlashForge Finder...
Topics: 3D Printer Parts, thingiverse, stl, sparkmaker, lead_screw_nut
3
3.0
Jun 6, 2021
06/21
by
Gar p (Garps)
data
eye 3
favorite 0
comment 0
I noticed a problem with my new Photon - there was a lot of excessive play with the lead screw nut ( which is not a Anti Backlash? standard from the Factory ) i spent almost 4 days with Support and eventually there sending a New Nut - as I didn't want to wait and will probably upgrade the factory nut to something better I designed & printed a temporary nut for the top on my FDM Printer first and then printed this one using the scad program files I changed on the photon - It has transformed...
Topics: TR8x8, anti-backlash, thingiverse, Acme_leadscrew, leadscrew, anycubic_photon, stl, Photon_S, lead...
4
4.0
May 1, 2021
05/21
by
Adrian Kuc (Frywolny)
data
eye 4
favorite 0
comment 0
I remake this, because in my ender Z-axis screw was too close to aluminium profile. Resulted in that I can't mount bearing, or If I mount I can't get the same top position. So I shortened that 1 mm. And actually all works fine. Bearing: 608 2RS
Topics: stl, Ender, z_axis, creality_ender_3, Ender3, leadscrew, Z-Axis, Ender_3, lead_screw_stabilizer, 3D...
4
4.0
Mar 13, 2021
03/21
by
Jacob Thompson (jakabo27)
data
eye 4
favorite 0
comment 0
These files support linear motion using 8mm rods, a lead screw set, and a NEMA 17 stepper motor. It was originally designed for vertical motion in Senior Design 1 Fall 2019 at Clemson University for a Towers of Hanoi project. Additional Hardware Needed - NEMA 17 Stepper Motor [Amazon](https://www.amazon.com/STEPPERONLINE-Stepper-Bipolar-Connector-compatible/dp/B00PNEQKC0/ref=sr_1_5) - Linear Bearings - I used solid polymer bearings....
Topics: thingiverse, 8mm, lead_screw, Robotics, leadscrew, 8mm_smooth_rod, stl
3
3.0
Jun 11, 2021
06/21
by
Robert Keefe (RobKeey3825)
data
eye 3
favorite 0
comment 0
Lead Screw Stabilizer, mounts on the top of the printer frame and slips over the 8mm lead screw, raise the gantry to the top before tightening the mounting screws
Topics: 3D Printer Parts, thingiverse, 8mm_leadscrew, stabilizer, lead_screw, stl
8
8.0
Apr 23, 2021
04/21
by
Morten Nielsen (dintid)
data
eye 8
favorite 0
comment 0
**Update 10th april 2016** Added New Z-left, middle and right and 2 new versions of the motor bracket: one with and one without the Z-max endstop holder. They are all denoted v1.2 **Changes**: Reduced the depth/length of the "wings" going out backwards as they could hit the z-max endstop holder and/or screws in some instances (not tested on printed cases). Made room for 20mm M4 screws and generally slightly tweaked the middle piece. Rounded a lot of corners and added he Ultius and M4...
Topics: leadscrew, Tantillus Z-stage, 3D Printer Parts, Tantillus lead screw, Ultius, stl, lead-screw,...
5
5.0
Apr 27, 2021
04/21
by
A-A-Ron FluffyBunnies (Zx80r1)
data
eye 5
favorite 0
comment 0
Just some Adapters I made for my CNC router do adapt Ball lead screws to them instead of ACME Thread. Seem to work pretty well I used M4 fasteners for most of these. Ebay Ball screws and DIY Router Package nothing name brand scale/remix to your liking.
Topics: thingiverse, CNC Router, DIY, stl, Lead Screw, Ball Screw, CNC
5
5.0
May 1, 2021
05/21
by
Manuel Schmitt (Kasperdelasopa)
data
eye 5
favorite 0
comment 0
You only be able to print it on a SLA printer, as the walls are thin. I created it, as i wasn't able to find a model, which has the same outer diameter of the thinner cylinder. Don't print support touching the inner thread! 8mm thread 2mm pitch 4 starts Fits into the slide from this linear actuator: https://www.thingiverse.com/thing:4580936
Topics: stl, leadscrew, 8mm_leadscrew, TR8x2, lead_screw, thingiverse, 3D Printing
9
9.0
Apr 28, 2021
04/21
by
Johannes Funk (Mr_Fonk)
data
eye 9
favorite 0
comment 0
I made a new clamping ring for the Lead-Screw. Mine had a really good fit, and with the two M3 Screws it will not move. In addition to the clamping ring, there´s a "washer", which is perfect for the bearing. With the Lead screw bearing holder, the Z-Axis runs smooth as can be. Mr. Fonk
Topics: thingiverse, clamp, stl, 3D Printer Accessories, lead_screw, Tevo_Tarantula
2
2.0
Oct 29, 2021
10/21
by
Liam Venter (MFBS)
data
eye 2
favorite 0
comment 0
These are lead screw steadies for the Rat Rig V-Core 3 printer. I don't recommend you use them.... 24/10/21 Updated front left and front right upper steadies to V2 to correct small (but critical) dimensional inaccuracy. If you are not using an anti-wobble solution these may make your Z banding worse. Results will vary from printer to printer and depend on your alignment and how straight your lead screws are. With these lead screw steadies you will visually reduce the amount your lead screws...
Topics: thingiverse, lead screw, Guides, Rat Rig, stl, 3D Printer Accessories
11
11
Jan 18, 2021
01/21
by
Shane Hooper (shanehooper)
data
eye 11
favorite 0
comment 0
Workhorse Printer is an open source 3d printer released by 3D Distributed in 2017. The project is still a work in progress. If you have any questions or suggestions contact 3ddistributed@gmail.com If you need a modification or custom model contact us. If you want to bring your own printer to market using our components contact us. The machine is open source non-commercial but we can make proper arrangements or license deal if needed. Just consult with us first. www.3ddistributed.com
Topics: 3D Printers, CNC_Machine, lead_screw_nut_mount, leadscrew, large_print_area, big_3d_printer,...
