3
3.0
Mar 24, 2021
03/21
by
Josh Pelton (EngineerErrant)
data
eye 3
favorite 0
comment 0
A little keyhole clip for flashlights around 1" in diameter.
Topics: stl, flashlight_mount, thingiverse, flashlight_holder, Organization, flashlight, LED_Flashlight
4
4.0
Mar 9, 2021
03/21
by
Jimmy James (jimmyjames008)
data
eye 4
favorite 0
comment 0
Flashlight Hanger to hold flashlights with a 25mm diameter body.
Topics: stl, thingiverse, flashlight_holder, flashlight_mount, Tools, flashlight, hanger, Flashlight_clip
3
3.0
Apr 2, 2021
04/21
by
Jon Theissen (homesik)
data
eye 3
favorite 0
comment 0
I found a great maglight holder, but it had to go in the long way. I wanted it to snap. It also broke too easily, so this added supports
Topics: flashlight_holder, thingiverse, Parts, flashlight, flashlight_mount, stl
3
3.0
Mar 10, 2021
03/21
by
Banana Peel (Banana3d)
data
eye 3
favorite 0
comment 0
This is a wall mount for Klarus XT12 flashlights. Printed in PLA at 35% infill.
Topics: stl, thingiverse, flashlight_holder, flashlight_mount, flashlight, DIY
2
2.0
Aug 22, 2021
08/21
by
Rob Stu (RobbS)
data
eye 2
favorite 0
comment 0
This is a bedside flashlight holder I designed specifically for my Canucklite flashlight (which is designed around a Conboy S2+ housing) It should fit any light up to about ~26mm. Also holds 1x spare 18650 battery. You can use #8 screws are used to affix it to a surface.
Topics: flashlight_holder, flashlight_mount, Flashlight, stl, thingiverse, Electronics
19
19
software
eye 19
favorite 0
comment 0
Flashlight
Topic: Flashlight
0
0.0
Aug 14, 2022
08/22
by
Craig Howdeshell (chowdeshell)
data
eye 0
favorite 0
comment 0
This is a flashlight holder that you can mount anywhere. I needed one for next to my bed and this was the result. It is designed for a flashlight that has a 1.25" footprint and is 6 inches tall. If you put the STL file in your slicer you should be able to resize it to your needs. However, if you are an Inventor user I have also provided the .ipt file for you so you can edit it if you like.
Topics: flashlight holder, flashlight storage, stl, thingiverse, flashlight, flashlight mount, holder,...
0
0.0
Aug 16, 2022
08/22
by
Claude Theroux (ctheroux)
data
eye 0
favorite 0
comment 0
This is a small flashlight holder that can be screwed on a wall and so on. It is specifically design for a Police Security 3 cubs flashlight. Support material is not required. An infill of 20% is recommended. This object main web page is: http://www.ctheroux.com/small-flashlight-holder/. This object was designed using Solid Edge Community Edition. You can request the source files on the page listed above.
Topics: Flashlight holder, Police Security, Flashlight, stl, thingiverse, Flashlight bracket, Flashlight...
3
3.0
Jan 18, 2022
01/22
by
Frank F. (UncleFrankSays)
data
eye 3
favorite 0
comment 0
This is a new top. The velcro strap goes through the part. See this project for more info and background on the design. https://www.thingiverse.com/thing:4696538
Topics: flashlight_holder, flashlight_mount, thingiverse, flashlight, Hand Tools, stl
4
4.0
Jun 10, 2021
06/21
by
Michael Porter (mporter410)
data
eye 4
favorite 0
comment 0
I just purchased this Fenix LD30 flashlight and noticed that it can't be stood up on end so I designed an end cap that will allow it to stand up, and also operate the flashlight. So I designed one in Tinkercad and it works great. Enjoy! Update 3/24/2021 Added a new version that provides a slightly tighter fit on the flashlight. Update 3/26/2021 Added a new version with smoother sides.
Topics: flashlight_mount, LED_Flashlight, flashlight_cap, flashlight_holder, flashlight, flashlights,...
3
3.0
Jan 7, 2021
01/21
by
Nathan Beier (nagobe)
data
eye 3
favorite 0
comment 0
Of all the designs I found for flashlights, I loved the design of this holder, the clip part specifically. I appreciate the work to design this for a specific model flashlight, but I didn't need the hood/cover or the bottom piece. So I removed the hood and scaled it down to fit a 20mm LED flashlight, making this a bit more generic.
Topics: flashlight, flashlight_mount, Organization, stl, thingiverse, flashlight_holder
2
2.0
Oct 26, 2021
10/21
by
Matthew Carrasco (MaddMatt62)
data
eye 2
favorite 0
comment 0
Print it, mount it on your wall, hang your flashlights.
Topics: Household, flashlight_mount, flashlight, stl, thingiverse, maglight, flashlight_holder
5
5.0
Mar 15, 2021
03/21
by
Richard Sposit (skiter13)
data
eye 5
favorite 0
comment 0
This is a Mountable Energizer Flashlight Model PMTRL8 Holder. It is to be mounted using double sided adhesive or 3M Command Strips.
Topics: flashlight_holder, flashlight, thingiverse, flashlight_mount, energizer, stl, Organization
11
11
Jan 18, 2021
01/21
by
Christopher Wilcox (chrisxs5)
data
eye 11
favorite 0
comment 0
This a my interpretation of a floor model spotlight. It is designed to hold the cheap 3.5 inch, 9 LED flashlight. This kind: https://www.harborfreight.com/catalogsearch/result/index/?dir=asc&order=EAScore%2Cf%2CEAFeatured+Weight%2Cf%2CSale+Rank%2Cf&q=flashlight Also found here: https://www.walmart.com/ip/Ozark-Trail-6-LED-Aluminum-Flashlight-10-Pack/38763652 Used M3*16 screws to attach bracket. They screw in perfectly without tapping. Add in a little glue to the hole if needed. Color in...
Topics: flashlight_mount, Electronics, Spotlight, thingiverse, flashlight_holder, stl, flashlight
0
0.0
Aug 13, 2022
08/22
by
Yefim Draigor (Satex)
data
eye 0
favorite 0
comment 0
Flashlight Holder
Topics: flashlight_holder, stl, thingiverse, flashlight, flashlight_mount, 3D Printing
10
10.0
Jan 14, 2021
01/21
by
Gilhun Lee (Nileblue)
data
eye 10
favorite 0
comment 0
Can hold tight to use M3 screw X 3, 25mm strap compatible Flashlight Diameter : 21.5mm, 23mm, 25mm
Topics: thingiverse, stl, flashlight, flashlight_holder, flashlight_mount, Outdoor & Garden
2
2.0
Nov 8, 2021
11/21
by
Johannes Hansson (JoGiz)
data
eye 2
favorite 0
comment 0
For those dog walks in the dark when you need some light to see where you are walking. The flexi leash mount gives you a free hand to keep in your pocket or pick up things the dogs leaves behind. This mount is created to fit a Clas Ohlson Asaklitt Mini LED https://www.clasohlson.com/se/Ficklampa-Asaklitt-Mini-LED/p/36-4839 As plastic break, secure your flashlight with the arm strap around your flexi leash handle to not loose your flashlight if broken. Some force is needed to push down the...
Topics: stl, flashlight_mount, flashlight, flashlight_holder, Pets, thingiverse, dog
5
5.0
May 1, 2021
05/21
by
Sven Greiner (SammysHP)
data
eye 5
favorite 0
comment 0
Clip to attach a right angle headlamp to a headband in a single body. Requires only a (20 mm) textile elastic band. The pocket clip can stay on the light. This is mostly a template for FreeCAD that you can adjust to fit your own flashlight. An example for a Skilhunt H04 is included. There are two versions: v2 without top strap and v3 with the additional top strap for heavy lights.
Topics: stl, flashlight, Tools, flashlight_holder, clip, flashlight_mount, thingiverse
9
9.0
Aug 4, 2020
08/20
by
Center for Accessible Technology in Sign
movies
eye 9
favorite 0
comment 0
ASL vocabulary
Topic: flashlight
27
27
software
eye 27
favorite 0
comment 0
FlashLight HD LED
Topic: FlashLight
5
5.0
Apr 12, 2021
04/21
by
Wesley Jung (wjung88)
data
eye 5
favorite 0
comment 0
Designed this so I could use the HL50 as an EDC flashlight without worrying about it turning on in my pocket. This makes it easy to turn on when you want to but it's almost certainly won't turn on in your pocket.
Topics: thingiverse, Tools, Fenix, flashlight_cap, flashlight, stl, LED_Flashlight
4
4.0
Apr 11, 2021
04/21
by
Hunter Nunyurbiz (Superfish1000)
data
eye 4
favorite 0
comment 0
This is a super simple case designed for the Jaycon USB flashlight kit. Recommended minimum print settings: 0.2mm layer height, 100% infill, 3 shells. Print time (0.2mm layer height, 100% infill, 3 shells): approximately 1h15m. This flashlight is an awesome project for learning to solder. If you are interested in making this flashlight then check out the website of the manufacturer and consider buying their kit. It's super simple to build and only takes a few minutes. Checkout the link below....
Topics: thingiverse, flashlight_case, USB_Flashlight, DIY, Jaycon_USB_Flashlight, flashlight, stl, case,...
8
8.0
Jan 16, 2021
01/21
by
John Becker (jumpythegecko)
data
eye 8
favorite 0
comment 0
This is a flat mount for the triangle work light sold at harbor freight. The work light pops right in if pushed in from the bottom. This was designed to be used with #6 chamfered bolts. Even though it looks like supports are necessary, I printed without and it was fine. The small imperfections are not visible.
Topics: thingiverse, stl, flashlight, mount, holder, flashlight_holder, Tool Holders & Boxes,...
4
4.0
Mar 19, 2021
03/21
by
Peter Brazil (pbrazil)
data
eye 4
favorite 0
comment 0
This is a snap on mount to put a Fenix UC-30 flashlight on a gopro mount. I use this to mount his light to my helmet for night bike riding.
Topics: gopro, thingiverse, flashlight mount, flashlight, Sport & Outdoors, flashlight_holder, stl
8
8.0
Apr 16, 2021
04/21
by
Bryson Jack (Bryson_Jack)
data
eye 8
favorite 0
comment 0
I needed an LED flashlight holder and "Stand for Mini LED Flashlight by Smidge204" is one of the designs that I printed. Just looking at the original design, I couldn't conceive of how it wouldn't just fall over from the weight of the flashlight after a few uses. Well I was correct. That is exactly what happens. I made the gimbal with a lock so that particular problem is no longer an issue. The flashlight stand is not very tall, but if you want something pretty low to the surface, it...
Topics: flashlight_holder, Holder, stand, Flashlight, flashlight_mount, LED_Flashlight, thingiverse, Clip,...
9
9.0
Apr 24, 2021
04/21
by
Banana Science (Banana_Science)
data
eye 9
favorite 0
comment 0
This is a very powerful 10-watt flashlight that is perfect for your workshop or just as a powerful flashlight. It runs off of a 500mah 3s 11.1v lipo battery. This tiny light cranks out a whopping 1,000 lumens. The assembly video listed below includes links to all the parts and tools you will need to build it. A GoPro mount can be used to attach any GoPro handle, or you can use one of our own custom handles. A 26mm external diameter acrylic rod is used for our custom rod handle. Assembly Video:...
Topics: banana_science, stl, bright_flashlight, flashlight, thingiverse, shop_light, 10_watt_flashlight,...
3
3.0
Jan 5, 2021
01/21
by
Arthur Zaczek (arthurzaczek)
data
eye 3
favorite 0
comment 0
Diffuser and holder for any flashlight. Use the customizer to change the top part to fit your flashlight. The STL uses a 35/38mm cone for the flashlight mount.
Topics: flashlight_cap, flashlight, flashlight_mount, stl, diffuser, thingiverse, frame, Light_Diffuser,...
2
2.0
Dec 14, 2021
12/21
by
Rick (BobLoblaw232)
data
eye 2
favorite 0
comment 0
This is obviously very specific to this Anker flashlight. Easy to print and a very nice fit.
Topics: flashlight_holder, stl, flashlight_mount, thingiverse, flashlight, Tool Holders & Boxes
8
8.0
Jan 19, 2021
01/21
by
Mike Hornung (mikeymakesit)
data
eye 8
favorite 0
comment 0
I designed this flashlight holder to carry 7 flashlights of 14500 (AA) or 16340 (CR123) size. You can mount the rails as close or far apart as you need for the length of your lights. The limiting factor on this design is the greater of the emitter-end or tail-end diameters. This holder will accept lights with a maximum diameter of 25mm (31/32"). I have a [smaller version posted here](/thing:2874265) that's great for 10440 (AAA). I'm on a mission to store things vertically and take up less...
Topics: flashlight_mount, thingiverse, flashlight_holder, Organization, flashlights, stl, flashlight,...
3
3.0
Jan 7, 2021
01/21
by
Jimmy James (jimmyjames008)
data
eye 3
favorite 0
comment 0
Holder For small Flashlights
Topics: flashlight, Organization, stl, thingiverse, flashlight_holder
3
3.0
Mar 25, 2021
03/21
by
Kelly Reed (Kerdika)
data
eye 3
favorite 0
comment 0
for a 27mm flashlight uses M4 hardware
Topics: stl, flashlight_mount, thingiverse, Sport & Outdoors, airsoft, flashlight_holder, picatinny,...
2
2.0
Jul 25, 2021
07/21
by
Sven Greiner (SammysHP)
data
eye 2
favorite 0
comment 0
The original ZebraLight silicone mount that comes with their headlamps works, but not great. One of its biggest issue: It is hard to attach and remove the flashlight from the mount. It takes time. This is a customized version of my [unibody headlamp clip](https://www.thingiverse.com/thing:4812463) specifically for the ZebraLight H52. Use it together with a 20 mm elastic band.
Topics: thingiverse, Zebralight, flashlight_mount, clip, flashlight_holder, stl, Tools, flashlight
4
4.0
May 1, 2021
05/21
by
Lars Menger (Beledris)
data
eye 4
favorite 0
comment 0
EN: A holder that let's you clip a 90° flashlight to your chest pocket. Included are .stl with a 21mm and 26mm diameter and .step and .f3d files. The .f3d file can be changed by manipulating the parameters. Lampendurchmesser - Diameter of the Flashlight Halterwinkel - Degrees for the opening of the clip (30° works well) Dicke - Thickness of the clip and the arms. Halterlänge - Length of the clip V2 - Angled the chest pocket clip slightly and added curvature to the other side. DE: Ein Halter,...
Topics: stl, holder, flashlight, flashlight_holder, clip, flashlight_mount, thingiverse, Other
9
9.0
Apr 26, 2021
04/21
by
Anton Veretenenko (antonveretenenko)
data
eye 9
favorite 0
comment 0
Simple flashlight holder that you can screw on somewhere. Fits 2 popular sizes of 25.5mm and 23.5mm flashlights.
Topics: flashlight_holder, thingiverse, organize, stl, holder, flashlight, Hobby, flashlight_mount
3
3.0
Jan 5, 2021
01/21
by
Marius C (mariusc46)
data
eye 3
favorite 0
comment 0
This is a 28mm flashlight mount with support for pressure pad. Items required: 2x M4 x 30mm, 2 nuts and double side tape.
Topics: flashlight mount, stl, flashlight 28mm, flashlight holder, airsoft, thingiverse, DIY
3
3.0
Jan 8, 2021
01/21
by
Frank F. (UncleFrankSays)
data
eye 3
favorite 0
comment 0
I was inspired to create a flashlight stand by this version here: https://www.thingiverse.com/thing:1017689 It was a flashlight held on a portable stand. But, I didn't like the use of rubber bands to hold the flashlight. I didn't like the ball joint used to position the flashlight. And a wider base would be better for a heavier flashlight. I combined the large ball joint with clamping cup and stand from a PCB vise found here: https://www.thingiverse.com/thing:1702541 and the arms for holding a...
Topics: flashlight, flashlight_mount, Hand Tools, stl, adjustable_stand, flashlight holder, thingiverse
11
11
Jan 16, 2021
01/21
by
Toni Lopez Sayas (anlosay)
data
eye 11
favorite 0
comment 0
Flashlight mount for tripod, printed with PLA 0,1 quality.
Topics: flashlight_mount, thingiverse, Other, stl, flashlight
8
8.0
Jan 21, 2021
01/21
by
Benjamin Korelc (Bentsch)
data
eye 8
favorite 0
comment 0
I was just enjoying my free time in a dark forest and my flashlight fell from my belt, because of a holder. I am using this flashlight: https://www.ebay.de/itm/30000LM-Super-Hell-3-XM-L-T6-LED-Taschenlampe-Flashlight-Zoom-Fokus-Fackel-5modi/253384812749?_trkparms=aid%3D555017%26algo%3DPL.CASSINI%26ao%3D1%26asc%3D53390%26meid%3D54d83542534d4bcc91384ae517cef0db%26pid%3D100507%26rk%3D1%26rkt%3D1%26%26itm%3D253384812749&_trksid=p2045573.c100507.m3226 And i have created this belt holder.
Topics: electronics, led flashlight, thingiverse, belt, flashlight_holder, Hobby, led, stl, flashlight
3
3.0
Jan 7, 2021
01/21
by
B J (Shynd)
data
eye 3
favorite 0
comment 0
Needed a clip for my flashlight (WOWTAC W1) to attach to the brim of my baseball-style hat for computer / automotive / electrical / etc work in dim places.
Topics: flashlight, flashlight_mount, stl, Hobby, hat, light, thingiverse, flashlight_holder, cap
9
9.0
Apr 17, 2021
04/21
by
leo basil (leobasil)
data
eye 9
favorite 0
comment 0
This can be slipped over round flashlights (or other round things which you don't want to roll away) and prevents them from rolling away on sloped surfaces. Basically, it turns a round flashlight to a square on one end. -- Be sure to scale it accordingly, so it fits your flashlight!! -- You want the teeth reach about 10%-20% into your flashlight's outer frame for best grip. Mine measured at a diameter of 5.2cm. You can see in one of the images where I measured the distances. I have to say it's...
Topics: flashlight_holder, thingiverse, flashlight, stl, Sport & Outdoors
5
5.0
Apr 15, 2021
04/21
by
Keith Welker (okcazure)
data
eye 5
favorite 0
comment 0
This flashlight stand is based on my Trustfire 3T6 flashlight stand (http://www.thingiverse.com/thing:618322). I have updated the OpenSCAD file to calculate the stand thickness so I recommend this as your starting part for any derivative designs. There are plenty of "Knock-off" makers so please verify the dimensions match your flashlight: 33.5mm on switch end, 33.5 on LED end, 63mm head head diameter, and 160mm for center-to-center of supports. If you need an additional size and are...
Topics: flashlight_holder, thingiverse, flashlight, stl, Electronics, Trustfire
3
3.0
Jan 7, 2021
01/21
by
Ole Kamy (waffenmeister)
data
eye 3
favorite 0
comment 0
M-lok flashlight mount for ArmyTek Prime C2 and others with the flashlight body 19-22mm. Suposingly could be printed without supports, but I did not risk. 0.2mm layer height and 4 walls will provide the optimum strength for this item This is a toy gun accessory! Do not use with real firearm!
Topics: flashlight mount, stl, mount, thingiverse, Sport & Outdoors, mlok_flashlight,...
3
3.0
Jan 7, 2021
01/21
by
Josh L (Palmtopper)
data
eye 3
favorite 0
comment 0
Flashlight brim holder for 25.4mm/1", 28mm, 30mm, and 34mm flashlights. It has a bit of room to clamp down for flashight sizes
Topics: Flashlight, flashlight_mount, stl, hat, handsfree, brim, flashlight_holder, thingiverse, cap,...
8
8.0
Jan 19, 2021
01/21
by
Maximilian Preinfalk (MAL_0703)
data
eye 8
favorite 0
comment 0
It a Mount/Holder for my Led Lenser P3 for a picantinny rail system. I use it for air soft gaming. I love the light of the P3 and the focus option by this small size. To Use just slide the P3 in and you can mount it additional with zip tires. But it should also fit without the add. tires. To fix the Rail system you need a M5 bolt and screw.
Topics: flashlight_mount, picantinny, Tool Holders & Boxes, thingiverse, rail, flashlight_holder, stl,...
0
0.0
Aug 13, 2022
08/22
by
Th Ing (Syzguru11)
data
eye 0
favorite 0
comment 0
wall mount flashlight / Taschenlampe
Topics: wallmount, flashlight_holder, Taschenlampe, stl, thingiverse, flashlight, Taschenlampen_Halter,...
Topics: manualslib, manuals, Perpetual flashlight, ACDelco Manuals Flashlight
4
4.0
Jun 11, 2021
06/21
by
Raaf Vogel (Raaf)
data
eye 4
favorite 0
comment 0
A shiny cone for your cheap chinese flashlight. Slides over the head of the light, stays in place. Height: 15.3 cm Diameter flashlight: 4.05 cm See caiofelipetzs make for a different approach.
Topics: flashlight, Sport & Outdoors, stl, thingiverse, flashlight_cone
2
2.0
Dec 13, 2021
12/21
by
Vasil Zimich (EU4AX)
data
eye 2
favorite 0
comment 0
Flashlight_kosmos_mount.stl. One half print as it is, the second add as mirror copy. You will need 3 pins 1.5mm diameter, 15-18mm long. Additionally, you can glue both halves on the junction. Mounting to the mask with two screws M3x10. On another face 2 deaf holes for 5x3 magnets !!!!-> Perhaps it is suitable for such a flashlight https://aliexpress.ru/item/1005002959400131.html?spm=a2g2w.productlist.0.0.78872345uQHsT4 But I'm not 100% sure! I bought my place at the local shop
Topics: welder, flashlight_holder, stl, flashlight_mount, thingiverse, fubag, flashlight, Tool Holders...
8
8.0
Jan 16, 2021
01/21
by
Nicholas . (irtwood)
data
eye 8
favorite 0
comment 0
3 part flashlight stand. Requires 2 3/4" 1/4-20 screws, and a 1/4-20 butterfly nut. Holds a Ultrafire C8 flashlight or a similar sized (1" diameter) flashlight. The middle section (flashlight_stand-stand_section_v2.STL) needs to be tapped to 1/4-20. Printed at 300 micron layer height in black ABS on a Da Vinci 1.0
Topics: thingiverse, stl, flashlight, flashlight_holder, Gadgets, flashlight_mount, light_holder,...
5
5.0
Mar 18, 2021
03/21
by
Mac XXX (Mac0118)
data
eye 5
favorite 0
comment 0
I've made remixed Convoy S2 flashlight holder for bike. Changed diameter to 23.8mm for better grip and added knurling-like surface. Update 13-03-2020: I've added redesigned version with reinforced arms to avoid cracking. Added variant with chamfer to make flashlight slide-in easier.
Topics: flashlight_holder, flashlight, Sport & Outdoors, stl, bike, flashlight_mount, thingiverse,...
