4
4.0
Jun 11, 2021
06/21
by
Joel Gomes (Integza)
data
eye 4
favorite 0
comment 0
For more information watch:https://youtu.be/b399G61Z3fo
Topics: wankel_engine, stl, Engineering, thingiverse, engine, rotary_engine
30
30
software
eye 30
favorite 0
comment 0
GAMESDK GAME ENGINE
Topics: sdk, game engine, game, engine
423
423
Nov 10, 2019
11/19
by
Tom "PyTom" Rothamel
software
eye 423
favorite 0
comment 0
Ren'Py is a visual novel engine – used by thousands of creators from around the world – that helps you use words, images, and sounds to tell interactive stories that run on computers and mobile devices. These can be both visual novels and life simulation games. The easy to learn script language allows anyone to efficiently write large visual novels, while its Python scripting is enough for complex simulation games. Ren'Py is open source and free for commercial use.
Topics: visual novel engine, game engine
15
15
Apr 17, 2021
04/21
by
Jacob Byrnes (Jbyrnes)
data
eye 15
favorite 0
comment 0
This is a simplified model of a V8 engine. All the files have fairly big tolerances so you should not have issues with parts fitting together nicely. This is a fairly large model, approximately 160mm long by 140mm wide by 100mm tall. If you scale down the model it may be tough to get some parts to print well and may be difficult to fit them together but it should work if your printer is well calibrated. Assembly is fairly straight forward, you should have all the information needed to assemble...
Topics: Mechanical Toys, thingiverse, v8_engine, stl, Model_engine, engine
10
10.0
Apr 5, 2021
04/21
by
(mming1106)
data
eye 10
favorite 0
comment 0
http://youtu.be/ghG8BDdgRY8 This Thing Original drawing by Drew Hauck (GRABCAD)
Topics: thingiverse, wankel_engine, combustion_engine, rotary, wankel, 3D Printing, stl, rotary_engine,...
7
7.0
Jul 27, 2020
07/20
by
Center for Accessible Technology in Sign
movies
eye 7
favorite 0
comment 0
ASL vocabulary
Topic: engine
11
11
Apr 22, 2021
04/21
by
joseph straws (joestraws)
data
eye 11
favorite 0
comment 0
Air engine with a single piston.. just for model purpose not functional to run anything. Uses a spring that is not printed otherwise all other pieces are 3d printed. about 4-5 inches tall and stands on a 3 square inch base. the set screw and air valve screw are .25-20 along with the bottom screw to hold the bottom plate.
Topics: single piston engine, engine midel, air engine, Mechanical Toys, stl, air, thingiverse, engine
7
7.0
Jan 20, 2021
01/21
by
Philip Berglund (Berglundphilip)
data
eye 7
favorite 0
comment 0
You will need: 1 metal shaft that is 4.5 mm thick that can be used for the propeller, Super glue and hobby paint if you want to paint the engine and 4 m4 bolts that is 10 mm long for the stand. The card that is on the engine stand can be designed as you wish. For example, if you want to add text with facts about radial engines or put on an image on it. You can of course make it more detailed with cables from the spark plugs or paint the engine dusty so it looks older.
Topics: engine, Models, Radial_Engine, thingiverse, model_engine, model, stl
An I.C. Engine contains generally two types of valves i.e. inlet valve and exhaust valve. These valves are again classified into two types. One is mono metal and the other one is bi-metal. Mono metal valve is made by using only one metal. Bi-metal valve is made by two types of metals. Any valve is divided into two portions, one is head portion and the other one is stem portion. In bi-metal valve head and stem portion are made of different metals. Two different types of metal bars are joining by...
Topic: Engine
19
19
Mar 15, 2021
03/21
by
Dominik Szczesniak (DomiQ3D)
data
eye 19
favorite 0
comment 0
This is compressed air engine. To build it you need 608Z bearing, and something on flywheel. I use 5mm screw. Shaft have 8mm.
Topics: compressed_air_engine, air, compressed air, engine, engine air, thingiverse, air engine, compressed...
In recent years, several strategies such as fuel treatment, engine modification, EGR and catalytic converter have been introduced to control emissions from vehicles. Catalytic converter equipment is efficient and commonly used. Catalytic converters reduce emissions of carbon monoxide, hydrocarbons, nitrogen oxides and particulate matter from internal combustion engines and allow more strict pollution standards to be met. In this study paper different methods and strategies to increase...
Topics: Diesel engine, Engine performance, Emission, Catalytic Converter, IC Engine
18
18
Jan 20, 2021
01/21
by
Antoine Meyer (WillemVanDerDecken)
data
eye 18
favorite 0
comment 0
It's simple design of a Stirling engine of gamma type, made on SolidWorks. I have originally made this project for a high school project, 5 years ago. This engine was totally functional, and work very well if you put it on a coffee cup for example. But after a Matlab simulation, the yield was a little bit under a normal yield for a 3D printed Stirling engine. So feel free to improve it! I have by inadvertently lost all the pictures of the original engine (who i have let at my high school), and...
Topics: engine, Engineering, thingiverse, stirling, steam_engine, stirling_engine, stl
7
7.0
Jan 20, 2021
01/21
by
Andrew Moomaw (AJMoomaw)
data
eye 7
favorite 0
comment 0
https://www.youtube.com/watch?v=W9QeCIgOXYA This is an engine design inspired by Tom Stanton's compressed air engine. This is a work in progress and is being refined and optimized. In its current state, The engine is using the inner half of a VW beetle generator pulley as a flywheel, However the flywheel can be made with any object you desire if you can create your own connector. The engine uses mostly M3 bolts with a few M2 bolts. The valves use two 6mm X 11mm springs. The input is designed to...
Topics: engine, air_engine, compressed_air_engine, Engineering, thingiverse, stl
12
12
Mar 19, 2021
03/21
by
(zefram)
data
eye 12
favorite 1
comment 0
Model of the cylinder layout of the Napier Deltic engine found in the Deltic class of British diesel locomotives. 3D printed in 46 parts and assembled into a working model. A stop motion video is available in the downloads.
Topics: locomotive_engine, steam_engine, thingiverse, engine, Engineering,...
9
9.0
Apr 24, 2021
04/21
by
tim böhme (tim_boehme)
data
eye 9
favorite 0
comment 0
After buying a Moto Guzzi V7 i wanted to make a model of a 90°-V2-engine. So here it is the Version 1.0 next version will also have cylinderheads, valves and a camshaft. But this will take more effort and time than this simple model. Nevertheless its a beautiful model and i did not see anything comparable on Thingiverse sofar.
Topics: Engineering, Engine, Moto_guzzi, V_Engine, stl, thingiverse, V-Engine, 2_Cylinders, engine_model
5
5.0
Jun 11, 2021
06/21
by
(Pascal95)
data
eye 5
favorite 0
comment 0
Summary Just a test piece, i was not able to remove all the errors from the file, but it prints fine at 0.1mm layer Original piece : https://www.thingiverse.com/thing:3260204 ***(update, this can't run since half of the cams run backward (and will cancel rotation from each other) Some re-engineering will be required
Topics: kitchen, modular, thingiverse, v8 engine, engine, air engine, concept, stl
Tuning manual for Weber cauburetors
Topics: weber, carburatore, carburetor, carburetter, engine, internal combustion engine, carburetted engine
4
4.0
Jun 7, 2021
06/21
by
Vardan Antonyan (tony_912)
data
eye 4
favorite 0
comment 0
This is working compressed air engine that is fully 3D printed and does not require any hardware. The design is based on thing:576482 and has added functionality. This engine can operate from compressed air and can deliver substantial power via integrated Gear on flywheel. Most likely I will continue development of this engine and add power modules and accessories. Let me know what would be good development for this engine. The engine design process and tests are available in...
Topics: air_engine, compressed_air_engine, thingiverse, stl, Engineering, steam_engine
229
229
Sep 20, 2010
09/10
by
Munk, Max
texts
eye 229
favorite 0
comment 0
The choice of the numbers of revolutions and of the diameter, the distribution of thrust, and the values of the constants in the aerodynamical equations of the propeller are discussed.
Topics: ENGINE - DESCRIPTION, ACCIDENTS - CAUSES, ENGINE TROUBLE
5
5.0
Mar 15, 2021
03/21
by
tristan skinner (DiArchetype)
data
eye 5
favorite 0
comment 0
Shoutout to Turbo_SunShine, love the original V-Twin fidget motor! I really liked this V-twin and printed it a bunch of times before deciding I wanted more moving parts and some bits tweaked... Im sure the actual firing orders/rotation of the cylinders are not correct I just wanted them all chugging differently. Im no professional modeler either and the models are very hodge-podged together but they do slice & print smoothly. Ive successfully printed them in PLA & ABS and after a bit of...
Topics: engine, thingiverse, vtwin_engine, motor, V8 engine, Fidget_Toy, Gadgets, v-twin, V6 engine, V8...
6
6.0
Mar 17, 2021
03/21
by
3D Printing Evolution (EVO3DP)
data
eye 6
favorite 0
comment 0
I've modified the 3D Printable Jet Engine made by CATIAV5FTW in order to rotate automatically using a 12V DC Motor and a Controller. Besides the modified parts from the original one, there is a new part called "Connector" wich is practically an adaptor between the DC motor shaft and the main shaft of the JET ENGINE. If you're using other type of DC Motor, that part may not be compatible with your motor but can be easily modified for your needs. The files that you won't have to print...
Topics: display_jet_engine, jet_engine_modified, Electronics, automated_jet_engine, jet,...
10
10.0
Jan 12, 2021
01/21
by
joseph straws (joestraws)
data
eye 10
favorite 0
comment 0
This is a model of a Wankle Engine. With off set pistons, holes for air intake, exhaust and spark plugs. Bolts are required to hold the parts together. Made on a LulzBot Mini.
Topics: rotary, thingiverse, stl, mazda, wankle engine, engine, wankle, rotary engine, Models
14
14
Jan 14, 2021
01/21
by
Thomas Ward (TWard891)
data
eye 14
favorite 0
comment 0
Jet Engine with Pylon Board
Topics: thingiverse, airplane, stl, engine, jet_engine, Vehicles, aircraft, model_aircraft_engine
0
0.0
Aug 13, 2022
08/22
by
Christopher Winkley (Chriswk)
data
eye 0
favorite 0
comment 0
A V8 engine that assembles with no extra fasteners. You will need: 1x V8 engine base 2x V8 engine top 8x Piston arm, Piston head, Connector clips 1x V8 Driveshaft Set supports to 46 degrees to minimize them. Print Orientations: Base - Stand upright, cylinders up at 45 Tops - Middle face on build plate, cylinders up at 45 Driveshaft, Piston arms, clips - Lie flat Piston heads - Face down, pivot points upwards Assembly: Remove any supports and clean off driveshaft thoroughly. Connect piston arms...
Topics: engine, v8_engine, stl, thingiverse, Vehicles
The Milling World Magazine
0
0.0
Aug 14, 2022
08/22
by
The Milling World, McFaul & Nolan, proprietors of Buffalo, New York USA
texts
eye 0
favorite 0
comment 0
1890 Steam Engine Horsepower Basics
Topics: Steam Engine Horsepower Basics, Steam Engine Horsepower 101, Steam Engine Horsepower Formulas,...
16
16
Jan 10, 2021
01/21
by
Jason (poetryinmotion)
data
eye 16
favorite 0
comment 0
Finally It's time to get our heads on. Litterally..... In this update I have uploaded all the parts needed to close up the cylinders. All gaskets are included but only one is required on the on the LP lower head. The LP cylinder support leg attaches to the LP lower head and omitting this gasket may cause a gap between the lower head and support leg. Later Ill be releasing a 1.5 update for the LP lower cylinder head that closes the gap. If you are completly lost and wound up here by accident and...
Topics: Engineering, marine, thingiverse, cylinder head, stl, marine_steam_engine, steam, engine,...
8
8.0
Jan 20, 2021
01/21
by
Matej Mosnáček (Justy_guy)
data
eye 8
favorite 0
comment 0
I have some of 20x20mm steel profile laying in the garage, the Ericthepoolboy's engine stand (www.thingiverse.com/thing:2225638) is made of "American" type of profiles... Metric stuff is easyer to get here in Europe... My design is more simple, no laser cutting, just welding is needed. My first try doesn't look very good with the tiny EF12, it was made of 180 (1), 180 (2),160 (3),150mm (4) lenght profiles (670mm total). For my EF12 I will recomend 150 (1),160 (2), 150 (3), 140mm (4)...
Topics: working_engine, engine_model, Automotive, thingiverse, scaled_model, engine_stand, stl
5
5.0
Mar 15, 2021
03/21
by
Doug Moore (Dougm2k)
data
eye 5
favorite 0
comment 0
This is a compressed air engine I designed in Solidworks. I made it because I was inspired to figure out how steam engines worked after taking an intro to thermodynamics class. Videos of it running and how the inside works can be found on my youtube channel: https://www.youtube.com/channel/UCSWBaA_eoHSNFdXXwe_GXBQ Also note you will need some extra parts for the build: -Wooden base of some sort. -Small wooden block about the engine's height - it needs to be in line horizontally with the...
Topics: compressed_air_engine, thingiverse, steam_engine, Mechanical Toys, stl, air_engine
10
10.0
Jun 11, 2021
06/21
by
(Specy_wot)
data
eye 10
favorite 0
comment 0
Summary this is a remix of the "Model Aircraft Styled Air Engine, Experimental" made by Greg Zumwalt on youmagine. https://www.youmagine.com/designs/model-aircraft-styled-air-engine-experimental i added some stuff to make it a bit cooler, (i think it is) but it didn't fit very well cuz i'm a noob at 3d modeling :P. enjoy it and leave a like on my and his projects! (did not test it yet) Print Settings Printer: anet a8 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15/0.20 Infill:...
Topics: air_engine, airplane, thingiverse, engine, propeller, steam_engine, RC_airplane, stl
20
20
Jan 10, 2021
01/21
by
Jason (poetryinmotion)
data
eye 20
favorite 0
comment 0
Ladies and Gents of the thingiverse. Tonight I give you the missing link. In 1841 the Stephens Locomotive Works developed the "stephens link motion" valve gear. Its design revolutionized steam engine effiency and became a standard in engine construction up til the 1900's. The small upload today is that link. You will have to print 6 each of all the part files to make 3 sets of links. The parts are small and should all fit on the bed for one printing. The installation of these links...
Topics: Engineering, thingiverse, stl, model_engine, marine_steam_engine, compound steam engine,...
3
3.0
Sep 13, 2021
09/21
by
Florian (flo99k)
data
eye 3
favorite 0
comment 0
This is a remix of the stand for the jet engine of rndmframes_printing. It has the correct scaling and correct fittings for the engine-shape. The print takes rougly 3 hours.
Topics: stl, thingiverse, turbofan, aviation, engine, turbine, Vehicles, engine stand, jet engine
3
3.0
Jan 7, 2021
01/21
by
Foon Chu (chucnc)
data
eye 3
favorite 0
comment 0
This is my remix of kmccon's sliding valve engine. Please forgive me as I may have several versions of the same upload with different comments as I am unable to confirm which upload went thru successfully. I added the follwoing: 1) New weighted flywheel. Slip in 5 3/8" bolt nuts (14.2X8.4 mm) 2) Tighten tolerance on crankshaft for a better fit on the 608 bearings. You will need a bit of filing/emery work on the eccentric and flywheel for snug fit. 3 Integrated hose barb with the sliding...
Topics: Other, sliding valve, stl, engine, air engine, thingiverse, air, steam engine
11
11
Jan 19, 2021
01/21
by
John Walters (maieiahbgaae)
data
eye 11
favorite 0
comment 0
This is a model of a Wankel internal combustion engine. The rotor turns freely by rotating the knob in the back. I made the model as easy to print as possible. Parts that need to be glued include: 1) The spark plug, although that's optional. 2) The output (hex) shaft. 3) The shaft collar, which locks the eccentric shaft and rotor into position. 4) The turning knob. https://www.youtube.com/watch?v=U_P1cmCpjXM
Topics: engine, rotary, wankel_engine, Automotive, thingiverse, wankel, motor, rotary_engine, stl
4
4.0
Jun 22, 2021
06/21
by
Nick Gosdschick (rndmframes_printing)
data
eye 4
favorite 0
comment 0
This is version 2 of my 3D printed air engine. This engine uses a rotary valve and requires a small nail for the piston and two 608 bearings. Assembly is straight forward but requires a bit of drilling and sanding to reach the tolerances. Engine runs with lung pressure and is designed to fit a G1/8 connector at the inlet. This engine is part of a project I did for university.
Topics: stl, thingiverse, engineering, Engineering, engine, single_piston_engine, compressed_air_engine,...
3
3.0
Mar 13, 2021
03/21
by
Jeffrey Klein (geeteoh)
data
eye 3
favorite 0
comment 0
The 3D printed LS3 engine crate is designed to go with the working Chevy LS3 Engine model created by ericthepoolboy on thingiverse.com. This crate has been designed to be printed on a 200mm by 200mm printer. Some of the planks will need to be stood on end and rotated by 45 degrees to fit on this small printer. The crate is assembled into three parts: the base which holds the engine, the four sided box which can be lifted, and the removable top. Each of the main assemblies is connected by the...
Topics: thingiverse, engine crate, ls3 engine crate, ls3 stand, ls3 engine, ls3, engine stand, stl,...
142 p. 8vo
Topic: Steam engine
Three peice "freak metal" band from Anchorage Alaska. A blend of dissonace and melody.
Topic: Search Engine
Digital Engine creates modern music in an undisclosed location using secret methods that may involve modern and/or ancient techniques.
Topic: Digital Engine
22
22
Jun 24, 2021
06/21
by
nupanick
software
eye 22
favorite 0
comment 0
World created using the ZZT engine.
Topics: ZZT, Engine
41
41
Jun 30, 2020
06/20
by
Anarchy
software
eye 41
favorite 0
comment 0
World created using the ZZT engine.
Topics: ZZT, Engine
104
104
Jan 9, 2019
01/19
by
Anarchy
software
eye 104
favorite 1
comment 0
World created using the ZZT engine.
Topics: ZZT, Engine
90
90
software
eye 90
favorite 0
comment 0
fire house subs
Topics: fire, engine
FEED ENGINE. What is Feed Engine exactly? Well, Feed Engine is a hard-hitting metal band that hails from Grand Rapids, Michigan. We are a group of four, young, determined individuals. What drives us? Simply, the need to play music. The need to break free of the all-but-dead Grand Rapids music scene and get our message to the whole world. Our mission? To destroy the music scene, blow up the charts, and provide enough heavy groove to get the metal heads dancing and the club fags thrashing! This...
Topic: Feed Engine
83
83
Dec 25, 2020
12/20
by
NinjaC86
software
eye 83
favorite 0
comment 0
World created using the ZZT engine.
Topics: ZZT, Engine
42
42
Dec 3, 2019
12/19
by
Venom; Hercules
software
eye 42
favorite 0
comment 0
World created using the ZZT engine.
Topics: ZZT, Engine
55
55
Jan 9, 2019
01/19
by
Stuart Shum
software
eye 55
favorite 0
comment 0
World created using the ZZT engine.
Topics: ZZT, Engine
172
172
Jan 8, 2019
01/19
by
Unknown
software
eye 172
favorite 0
comment 0
World created using the ZZT engine.
Topics: ZZT, Engine
24
24
data
eye 24
favorite 0
comment 0
OpenRate Rating Engine
Topic: Rating Engine
33
33
Nov 4, 2019
11/19
by
Quantum P.
software
eye 33
favorite 0
comment 0
World created using the ZZT engine.
Topics: ZZT, Engine
10
10.0
Dec 28, 2020
12/20
by
Spread the Sign
movies
eye 10
favorite 0
comment 0
ASL vocabulary
Topic: electric engine
