C. Cowles and Co., New Haven, CT. Catalog and Price List of Carriage Hardware, 1886. Includes carriage lamps, bolts, clips, couplings, claps, screw eyes, dashes, felloes, gear, bells, carriage hinges, carriage handles, carriage irons, carriage king bolts, carriage lamp props, carriage lamp accessories, carriage moulding, carriage nuts, carriage perch irons, carriage pole crabs, carriage rivets, carriage screws, carriage whip sockets, whiffletree tips, yokes, yoke tips, varnishes, etc.
Topics: Carriage Lamps, carriages, carriage hardware, carriage steps, carriage parts, carriage bells, coach...
2
2.0
Jan 27, 2021
01/21
by
Center for Accessible Technology in Sign
movies
eye 2
favorite 0
comment 0
ASL vocabulary
Topic: carriage
9
9.0
Mar 18, 2021
03/21
by
Andreas Meindorf (FZS1_Fazer)
data
eye 9
favorite 0
comment 0
I've optimized the scad files for M3 with 5.5mm nut wrench size. The presets in the scad file is for 170mm smooth rod distance and a 50mm wide mid bar and can be easily modified, beltsize is GT2 and can be adjusted to XL/T5. Sorry, I've uploaded the version I've used for the Anet A8 first that has with only 0.25mm almost no support thickness in the scad file. I've corrected that by uploading a version with the support thickness of 4.9mm as it is in the thing this remix is based on.
Topics: y-carriage, Y_Carriage, carriage, 3D Printer Parts, stl, thingiverse
Title from cover
Topics: Carriage and wagon making, Carriage industry
The Coach-Maker's Magazine, Vols. 4 & 5 (partial). June 1857 through May 1858. Cyrus W. Saladee started an annual publication in 1853 dedicated to the carriage industry. It was in book form, containing about 150 pages and was issued in two numbers. It is not known if these early volumes survived. After discontinuing his annual publication, he began publication of 'The Coachmaker's Illustrated Magazine', which ran for 3 years and was discontinued due to lack to support and a bitter...
Topics: Carriages, Carriage Building, Coaches, Coach Building, Carriage Makers, Carriage Manufacturing
Title from cover
Topics: Carriage and wagon making, Carriage industry
Title from cover
Topics: Carriage and wagon making, Carriage industry
Title from cover
Topics: Carriage and wagon making, Carriage industry
Title from cover
Topics: Carriage and wagon making, Carriage industry
Title from cover
Topics: Carriage and wagon making, Carriage industry
9
9.0
Jan 17, 2021
01/21
by
Daniel Patterson (The_Great_Dano)
data
eye 9
favorite 0
comment 0
I Printed with PLA
Topics: 3D Printer Parts, thingiverse, z-carriage, z_carriage, stl, carriage
Title from cover
Topics: Carriage and wagon making, Carriage industry
Title from cover
Topics: Carriage and wagon making, Carriage industry
12
12
Apr 16, 2021
04/21
by
(Simonious)
data
eye 12
favorite 0
comment 0
This car is meant to be machined in aluminum.
Topics: x-carriage, x-axis, 3D Printer Parts, thingiverse, aluminum_carriage, stl, rigid_carriage,...
5
5.0
Jun 20, 2022
06/22
by
Felton, William, coachmaker
texts
eye 5
favorite 0
comment 0
2 volumes in 1 : 25 cm
Topics: Carriage and wagon making, Carriage industry, Carrosserie
7
7.0
Mar 2, 2021
03/21
by
Kyle Collins (Kylecollins)
data
eye 7
favorite 0
comment 0
Very strong carriage, uses 4 Perlin wheels instead of three and is very close in design size to my three wheel carriage but this one is a tad stronger & heavier design but simplistic. I did use this carriage on my current printer and does work well but ieventually upgraded to the 8 wheel for larger application, M4 alan bolts for all the hardware as usual. I also started tapping the M4 bolt holes in the plastic, sometimes the plastic would gaul up around the bolt threads and not hold...
Topics: carriage, X_Axis_Carriage, thingiverse, stl, 3D Printer Accessories, X_carriage
Title from cover
Topics: Carriage and wagon making, Carriage industry
Title from cover
Topics: Carriage and wagon making, Carriage industry
Title from cover
Topics: Carriage and wagon making, Carriage industry
Title from cover
Topics: Carriage and wagon making, Carriage industry
Catalog of carriage lamps and accessories from the Stevens & Sackett Co., New Haven, Connecticut dated June 1, 1901.
Topics: Carriage Lamps, Buggy Lamps, Carriage Accessories
15
15
Jun 6, 2021
06/21
by
Tommy Cheng (tommyc)
data
eye 15
favorite 0
comment 0
This is a version my Lm8uu Y Carriage adapted for the Mendelmax. Updated y-carriage7_max with working 3 lm8uu design.
Topics: Other, mendel_max, Mendelmax, y_carriage, thingiverse, stl, y-carriage, carriage
4
4.0
Apr 11, 2021
04/21
by
Bjorn Pasteuning (PD5DJ)
data
eye 4
favorite 0
comment 0
I own a Robo3D for a while now.. And what I like about it is the Wide 80mm Carraige rail system.. this gives lots of room to play with the Extruder Carriage. I have designed it so i can be used with the standard Mendelmax 1.5 dimensions. It uses standard LM8UU bearings. The Extruder Carriage is also extra wide so you can place any extrude on it.. For example you can mount a wade extruder straight or sideways. My Extruder carriage contains a Greg Wade Extruder with a E3D V6 Hotend, 2 Fan mounts...
Topics: thingiverse, MendelMax, carriage, stl, x-carriage, 3D Printer Parts, X_carriage
9
9.0
Apr 22, 2021
04/21
by
Waldo Pepper (WheresWaldo)
data
eye 9
favorite 0
comment 0
This is an add-on piece to the mini Space Invaders Carriage made by walter, http://www.thingiverse.com/thing:1322641 It sits between the Duct piece and the body Second version replaces the duct with a larger piece.
Topics: carriage, y-carriage, 3D Printer Parts, stl, x-carriage, thingiverse, Eustathios
2
2.0
Oct 29, 2021
10/21
by
Tate Sumerlin (Sumerlin_Designing)
data
eye 2
favorite 0
comment 0
**Now don't expect much...** Here's just one more to add to the pile of hotend carriages. I've worked for almost 2 months, just tinkering around on this one design. *26* versions and plenty more prints than that later, this popped out. **Before you read all this... Here's the basics:** -The files are all necessary except for "Fan Rest.stl". That is simply for the hotend fan (not part fan) to rest on. -This carriage uses 2 4010 blower fans, a 4020 or 4010 case fan, a BLTouch, an E3D v6...
Topics: 3D Printer Extruders, thingiverse, anet_a8_carriage, dual_fan_carriage, BLTouch_carriage, e3d,...
California Digital Library
1,174
1.2K
Jun 27, 2007
06/07
by
United States. Army. Ordnance Dept
texts
eye 1,174
favorite 0
comment 0
41 p. 8vo
Topic: Mortar-carriage
6
6.0
Mar 2, 2021
03/21
by
Kaspars Butlers (kaspars)
data
eye 6
favorite 0
comment 0
Y carriage belt holder with Prusa MK3-style fixings. Very easy to change belts. No unnecessary tensioners - just loosen your P3Steel Y idler about 1-2mm, insert the belt, and tighten the Y idler. Dimensions are specifically measured, so that belt sits dead center and parallel with the 12mm diameter smooth idler and 16T motor pulley. Uses 2x M3 24mm + 2x M3 12mm screws with nylocks nut, assuming you have 3.3mm thick P3Steel frame. For best results, use: - 6 solid top/bottom layers - 6 perimeters...
Topics: carriage, P3steel, thingiverse, stl, y-carriage, 3D Printer Parts, Y_Carriage, Belt_Holder
1
1.0
Apr 19, 2022
04/22
by
engkon6 B1 (engkon6)
data
eye 1
favorite 0
comment 0
This is new version of Biqu B1 X carriage, they modified the design & mounting location from the old one, please see pictures for comparison. Created this based from https://www.thingiverse.com/thing:4313951 and measurement from the picture, might not be 100% accurate. Maybe it can be useful for someone to do some measurement & design.
Topics: 3D Printer Parts, thingiverse, carriage, Biqu_B1, template, x-carriage, X_carriage, stl
Caption title. Imprint from colophon
Topic: Carriage industry
9
9.0
Jan 19, 2021
01/21
by
Nicolas DUPONT (ndupont)
data
eye 9
favorite 0
comment 0
Tevo Tarantula Magnetic X carriage - OEM style with/without BLTouch support on the back. Remixed from the excellent https://www.thingiverse.com/thing:1829779 by **Banholm**, and the OEM carriage by **bitbrain** https://www.thingiverse.com/thing:2104509 This in order to keep the original width, and original belt attachement slits as I like the belt parallel to the axis. A BLTouch spacer is provided, it has to be resizes it in height to suit your need. A magnetic BLTouch attachement with a...
Topics: 3D Printer Parts, magnetic_carriage, thingiverse, tevo_tarantula, x-carriage, magnetic, stl,...
8
8.0
Jan 17, 2021
01/21
by
Luca Spiller (lucaspiller)
data
eye 8
favorite 0
comment 0
This is a customizable thing that can be used to measure the distance between the rods on an axis. I designed this as I needed a way to find out what the X-carriage dimensions of my no-name Chinese printer were. It's not particularly easy to measure with calipers, and you need it to be exact, so here is a thing that'll confirm the dimensions for you. First take your digital calipers and measure the rod diameter. It'll probably be a metric rod of 8mm or 10mm diameter. Unless you know it's not...
Topics: 3D Printer Accessories, xcarriage, thingiverse, x-carriage, x_axis_carriage, stl, carriage
7
7.0
Jun 20, 2021
06/21
by
Andrea Valentino (valand70)
data
eye 7
favorite 0
comment 0
This is a modification of the X axis for Geeetech i3 and the modified result will need a longer X carriage GT2 belt, the original one will be a few centimeters short. The x rods are placed horizontally instead of vertically and the extruder is turned into a Bowden setup. It fits original printer's Z interaxis and larger as it is adjustable in that direction. The belt and motor are rotated 90 degrees too. Interaxis of X axles is 45mm. The belt locking plate and extruder cooling case should be...
Topics: 3D Printers, thingiverse, carriage, X_Axis_Carriage, x-carriage, stl, axis, x-axis
8
8.0
Jun 20, 2021
06/21
by
Aleksandr El. (Predsedatel)
data
eye 8
favorite 0
comment 0
module bogie(a, b, db, Rh, $fn, DP, Ros) a - 1 side of the guide; b - 2 side of the guide; db - the diameter of the bearing; Rh - is the radius of the bearing washer; $fn - smoothing; DP - strap length with bearings; Ros - the radius of the axes (min preset 1.4 mm). module bogie(a, b, db, Rh, $fn, DP, Ros) a - 1 сторона направляющей b - 2 сторона направляющей; db - диаметр подшипника; Rh - радиус шайбы под подшипник;...
Topics: customize bogie, thingiverse, carriage, customize carriage, 3D Printer Parts, stl, OpenSCAD_module,...
9
9.0
Jan 19, 2021
01/21
by
Matthew Kidd (MattKi)
data
eye 9
favorite 0
comment 0
This is a crude approximation of a carriage which should (hopefully) be compatible with the mounting points in designer infill3D's extruder models. I haven't tried printing it and I most likely never will but I spent some time putting it together in the hope that it will fit the purpose. If you decide to print this please post a make or let me know your results. Intended for an x axis with 45mm center to center x rod separation. I may be willing to make the effort to build a variant with 44mm...
Topics: 3D Printer Parts, X_carriage, thingiverse, x-carriage, x_axis, X_Axis_Carriage, stl
10
10.0
Apr 1, 2021
04/21
by
Mark Kimsal (chugadie)
data
eye 10
favorite 0
comment 0
This is an evolution of the OpenSCAD rewrite by "toomanyplugs" of "bubak"'s original OpenX carriage. This version includes: captive nut traps for most of the horizontal holes more parametric variables (not completely finished) thicker cross beams and outer edge (to accommodate captive nuts) wider hole on the back clamp to feed x-axis belt through (see update after printing) Updated version: Shorter incomplete polygons. Should only be 3-4 layers of trick holes depending on...
Topics: sells, openscad, thingiverse, upgrade, mendel, Other, stl, x carriage, OpenX, x-carriage, carriage
Catalog of Anchor Brand Rims and Shafts from The Anchor Bending Works, Reading, PA. 1919. Jacob A. Leippe's Sons
Topics: Carriage Rims, Wagon Rims, Carriage Shafts, Carriage Rims, Buggy Rims, Buggy Shafts, Swingletrees
6
6.0
Mar 20, 2021
03/21
by
Carlos Rodriguez (Triggerr)
data
eye 6
favorite 0
comment 0
This is a complete carriage for hotend E3D V6 bowden. https://www.youtube.com/watch?v=QQghdN8ATpQ You only need a few more components: Servo SG90 or MG90S for autolevel (Optional) 40mm Fan 30mm Fan 2x M2 Screw to fix the support of autolevel 2x M2 Screw to fix the servo 2x M3 Screw to fix two carriage parts 4x M3 Screw to fix 30mm fan 2x M3 Screw to fix 40mm fan (Layer Fan) 2x Embedded Knurled M3 5mm (Fan Duct) 2x M3 Screw to fix the duct I recommended make with ABS
Topics: E3D_V6, stl, carriage, 3D Printer Extruders, bowden, thingiverse, E3D_carriage, bowden_carriage
9
9.0
Apr 26, 2021
04/21
by
Ken Hatch (Xaxis)
data
eye 9
favorite 0
comment 0
Presenting the MiltyKoss Alpha One! This is a small delta printer frame using the same frame dimensions as a Mini Kossel, but with a larger build area. MiltyKoss uses an innovative new design for sliding carriages on OpenBeam 1515 extrusions. The first prototype MiltyKoss is in testing, it is printing very well, so the design is being released to the wild! A lot of work went into designing a low cost highly functional sliding carriage. 20 or so different prototypes with different materials,...
Topics: delta_printer, thingiverse, carriage, bushing carriage, 3D Printers, Mini_Kossel_Carriage,...
9
9.0
Jun 7, 2021
06/21
by
Tommy Cheng (tommyc)
data
eye 9
favorite 0
comment 0
An updated version of my Y-Carriage this time with Jonas Kühling's LM holder. So no more zipties. They come in LM8UU or LM10UU variaties. Choose the one your want and remember to print the corresponding spacers. I uses the LM10x3 version with Misumi LMU-MX10 self lubricating bearings. More pictures here: http://goo.gl/JRg97
Topics: mendel_max, y_carriage, thingiverse, 3D Printer Parts, stl, y-carriage, mendelmax, carriage
10
10.0
Apr 17, 2021
04/21
by
DXLabs (DXLabs)
data
eye 10
favorite 0
comment 0
I wanted to test how feasible a DIY cheap y-carriage with parts one could easily find would be. Results: It's surprisingly good, the only down side is that it requires work assembling it, maybe a drill if the holes are too small. There is no belt anchor, you just secure the belts with zip-ties around the X rods. You can then use 1 zip-tie on the left side of the zip-tied belt to secure both X rods, and another on the right side. This creates tension in the rods and removes their flexibility....
Topics: 3D Printer Parts, thingiverse, stl, experimental carriage, cheap y carriage, proof of concept,...
3
3.0
Jan 18, 2022
01/22
by
William Smoak (tsmoakin)
data
eye 3
favorite 0
comment 0
The Original motor side carriage didn't have room for optical sensor mount and I found it slightly dimensionally off when printed. So I made a few edits and few prints and found these to match up and hold linear bearings. FYI: Removing optical sensor from original carriage is tricky because it is glued on. Also I setup Motor side to use brass knurls for belt clip instead of hex nuts. Something really important after the 2 carriages are printed and you put the rods back in them you want to make...
Topics: thingiverse, Y_Carriage, stl, 3D Printer Parts, carriage
4
4.0
Apr 11, 2021
04/21
by
Christian JOLLY (cjol)
data
eye 4
favorite 0
comment 0
Carriage for my rostock mini project
Topics: thingiverse, carriage, 3D Printer Parts, stl, Carriage_r
12
12
Jun 19, 2020
06/20
by
Center for Accessible Technology in Sign
movies
eye 12
favorite 0
comment 0
ASL vocabulary
Topic: carriage,buggy,perambulator
5
5.0
Apr 12, 2021
04/21
by
k j (sandfrog)
data
eye 5
favorite 0
comment 0
Toolholder / Carriage with LM8UU Holder
Topics: thingiverse, toolholder, carriage, DIY, stl, x-carriage, lm8uu
8
8.0
Apr 17, 2021
04/21
by
T Sherlock (brisinger)
data
eye 8
favorite 0
comment 0
Leadscrew driven x-axis motor
Topics: leadscrew, 3D Printer Parts, thingiverse, stl, carriage, leadscrew carriage
9
9.0
Jan 19, 2021
01/21
by
Nys Tao (Nystao)
data
eye 9
favorite 0
comment 0
Improved replacement X carriage for Anet e10 with original fan shroud or improved fan shroud with stock fixation holes. Improvement: - bottom wheel position adjustment - integrated belt holders / parallizer - BLtouch support Option A: Left belt holder with pin for X end stop activation, X end stop switch in original position Option B: Left belt holder without pin to be used with the remixed Z leveling part (thanks to Crankyface for original one) and X end stop switch moved to Z leveling part...
Topics: X carriage, anet_e12, thingiverse, x-carriage, Anet_E10, 3D Printing, stl, upgrade, carriage
7
7.0
Apr 8, 2021
04/21
by
RICARDO Rocchi (RicardoRocchi)
data
eye 7
favorite 0
comment 0
Skates with ball teflon or poliacetal not to wear the profile Embedded over when he introduces the profile ... And giving back in any listing because the motor delta bolei the engine is out of profile Can be pierced with designs and styles of curves to lighten ... Later estilisarei. + May by atraz bearings and bushings for fine tuning to protect the skates wear ... Improvement (1)- With these bushings not spoil the basket and we still have the possibility of putting a roll adjustments behind to...
Topics: Y_Carriage, carri, 3D Printing, patins, stl, x-carriage, carrinho, thingiverse, carriage, car, skate
10
10.0
Apr 23, 2021
04/21
by
Manollo (Indigo4)
data
eye 10
favorite 0
comment 0
My version of X Carriage. Includes : - Cable chain mount - Servo mount (for auto leveling)
Topics: X_carriage, carriage, 3D Printer Parts, MendelMax, stl, x-carriage, E3D_Hotend, thingiverse, prusa,...
12
12
Jan 12, 2021
01/21
by
Jeroen Verboom (MarethyuPrefect)
data
eye 12
favorite 0
comment 0
I've used the original design by XADJ (https://www.thingiverse.com/thing:2096175) and adjusted it to my needs. Thanks to the original designer. All you need is two M4x15 or longer bolt / nut sets. - Adjusted the spacing between the wheel holes so a tighter mount is possible - Increased the size for the M4 bolt / nut sets to mount the E3D - Added more convenient space to place the nuts for the E3D mounting - Added two small slits to use a tie wrap to gather the cables coming from the hot-end...
Topics: Tarantula, thingiverse, Tevo, stl, 3D Printer Parts, x-carriage, Requiem, X Carriage, Carriage, X...
9
9.0
Apr 17, 2021
04/21
by
Joshua Mantyla (Joshua_M)
data
eye 9
favorite 0
comment 0
Replacement x-axis carriage for FLSUN CUBE. + Built in Heat-sink fan duct + Built in Probe Mount with up to 6mm adjustment + Probe can be placed much closer to hot end for more accurate bed leveling + Lighter and just as strong at 10% infil + has extra mounting hole for future expansions (possible belt tensioner and Cable_chain mounting location)
Topics: x-carriage, XCarriage, 3D Printer Parts, thingiverse, stl, FLSUN_Cube, carriage, X_Axis_Carriage
