Cоц. сети и поддержка :) Коллекция ромов Light Gun (lightgun) с русским описанием, обложками, логотипами, артами/скриншотами и видео-превью для Batocera, Recalbox, Retrobat и т.д. Видео на YouTube Можно скачивать отдельные файлы внутри zip-архива, для этого нажмите SHOW ALL , найдите нужный архив и...
Topics: lightgun, roms, 4PDA
0
0.0
Aug 14, 2022
08/22
by
Samuel Jones (Widge)
data
eye 0
favorite 0
comment 0
A remix of the Drawcut's amazing Gun Stock adapter for the Sinden Lightgun. The original covers up the rear ironsights so I added ironsights to the main piece and made a front section with a centre post so that aiming down the gun can be restored. I also modified the screw holes to accomodate the beefy 6mm Chicago bolts I used. Here are versions with and without the screw hole modifications. If you need the version without, then you will also need the two side pieces from Drawcut's original.
Topics: light gun, Sinden light gun, Sinden, Video Games, stl, thingiverse, Sinden lightgun, Lightgun
4
4.0
Apr 20, 2022
04/22
by
Simon Collett (SexyMuthaFunka)
data
eye 4
favorite 0
comment 0
This is a remix of one of the pieces of @MG-dreamtechnology's SIG516 Assault Rifle (https://www.thingiverse.com/thing:3198686). I have designed (modified) it to fit in to the Sinden Lightgun Stock Adaptor (https://www.thingiverse.com/thing:4631950)
Topics: thingiverse, Lightgun, 3D Printing, stl, Sinden
2
2.0
Apr 19, 2022
04/22
by
Bob Valensky (slikk66)
data
eye 2
favorite 0
comment 0
I remixed @Kevman323 remix of @Hexxed original model. Main changes here are I lowered the ring where the spring sits a some more and added a more pronounced "slot" for the spring to fit. Also there is a slightly more agressive slant on the top block to allow slightly more return travel on the trigger. Neither of these may really be necessary, but I had trouble getting the remix to fit original and there was very little trigger movement for me. I may have been able to just file it...
Topics: thingiverse, Electronics, lightgun, stl, trigger, sinden
6
6.0
Oct 14, 2021
10/21
by
Kevin G (Kevman323)
data
eye 6
favorite 0
comment 0
Remix of Hexxed's Trigger fix mod, which constricts the traveling distance of the trigger on the Sinden Lightgun. I modified it slightly to give better support and rigidity to the small trigger tab, and to have it fit a little better in the lightgun case. It fits well in my recoil lightgun, and works well for improving the feel of the trigger!
Topics: Sinden, thingiverse, arcade, stl, Video Games, Lightgun
0
0.0
Aug 13, 2022
08/22
by
Stu (FlatFootFox)
data
eye 0
favorite 0
comment 0
This project contains several tweaked part files from RigoHoward on the GUN4IR Discord. It contains a solenoid mount for the JF-0530B, a rumble holder for Xbox 360 controller rumble modules, a single piece fisheye lens, and a microswitch trigger adapter with added supports.
Topics: guncon, Video Games, gun4ir, stl, thingiverse, Lightgun
3
3.0
Sep 14, 2021
09/21
by
Chris Almaguer (pchanizzle)
data
eye 3
favorite 0
comment 0
This is a holster for a Sinden Light gun designed to be mounted to the side of an arcade cabinet.
Topics: stl, thingiverse, Lightgun, Sinden, Toy & Game Accessories
7
7.0
Jan 19, 2022
01/22
by
Krzysztof Papuga (papugak124)
data
eye 7
favorite 0
comment 0
LED holders SFH 4547. The holes for the LEDs are under a slight angle, as described in the GUN4IR manual. The top and side holder are identical. Bottom bracket mounted so as not to cover the remote control receiver on the TV.
Topics: Lightgun, thingiverse, arcade, 3D Printing, stl, gun4ir
5
5.0
Jun 11, 2021
06/21
by
Roger Braunstein (rogerimp)
data
eye 5
favorite 0
comment 0
# Summary These parts are for JayBee's excellent Gun4IR project (https://github.com/JayBee-git/GUN4IR) which lets you create your own DIY lightgun with an IR camera, microcontroller, and 4 IR beacons. Go check it out, it rules. These parts will help you build a Gun4IR from a Nerf Alphapoint Laser Ops Pro toy gun, which is cheap and comes in packs of two. Personally I prefer to use toys like this instead of any irreversible modifications to CRT light guns like the Namco Guncon/2/3, since those...
Topics: lightgun, Video Games, thingiverse, g4ir, gun4ir, stl
11
11
Jun 10, 2021
06/21
by
Roger Braunstein (rogerimp)
data
eye 11
favorite 0
comment 0
These parts are for use with JayBee's Gun4IR DIY lightgun project (https://github.com/JayBee-git/GUN4IR) and Boojakasha's IR LED PCB (see the G4IR discord). These prints will help you securely and attractively mount IR beacons to a flat panel TV. Typically the PCBs are assembled with the heatsink "facing forward", that is the fins come forward in the same direction as the LEDs point. In this case, I have assembled the PCBs with the heatsink facing backward, so that I can hide the PCB...
Topics: Lightgun, Video Games, thingiverse, g4ir, gun4ir, stl
5
5.0
Apr 20, 2022
04/22
by
Stu (FlatFootFox)
data
eye 5
favorite 0
comment 0
IR emitter design for the GUN4IR light gun project. Designed to hold a 4x9 hand-cut protoboard with IR LEDs soldered in place in a triangle pattern. Emitters are designed to be daisy-chained to one another without a central control box / power source. 5v and ground wires from a snipped USB cable simply get soldered into the first emitter in the chain. The lid on the box should stay in place with friction, but they pop out rather easily when bumped. Feel free to se some extra glue to hold them...
Topics: thingiverse, Lightgun, gun4ir, guncon, Video Games, stl
5
5.0
Jan 15, 2021
01/21
by
V0 XeL (V0XeL)
data
eye 5
favorite 0
comment 0
Gun holster for arcade cabinets. Use customizer to set the board thickness of your cabinet so the holster fits snugly. Mirror file for other side of arcade.
Topics: thingiverse, Lightgun, stl, arcade_cabinet, Toy & Game Accessories
169
169
Oct 2, 2014
10/14
by
MadMatty
movies
eye 169
favorite 0
comment 0
Lightgun game. The game plays through 4 stages which loop multiple times and gets harder each time. I believe after the game has looped 4 times you have the best ending and there is nothing new to show.
Topics: Freedom Force, lightgun, nes, game, console, complete, longplay
0
0.0
Aug 14, 2022
08/22
by
Odwalla (Odwalla)
data
eye 0
favorite 0
comment 0
# THE ODCON1  The ODCON1 is a fully 3D printable NAMCO GunCon45 inspired shell for the Gun4IR project - http://forum.arcadecontrols.com/index.php?topic=161189.0 The ODCON aims to provide a robust and fully featured platform to support all features of the Gun4IR project (including solenoid blowback and vibration) while remaining affordable and accessible to build. Major...
Topics: guncon, Video Games, gun4ir, stl, thingiverse, Lightgun, arcade
0
0.0
Aug 13, 2022
08/22
by
fernando soto (Sotillo)
data
eye 0
favorite 0
comment 0
suport for led in gun4ir
Topics: stand led, Games, suport led, stl, thingiverse, Lightgun
149
149
Oct 2, 2014
10/14
by
MadMatty
movies
eye 149
favorite 0
comment 0
Lightgun game where you have to shoot oncoming ships and weapons fire. There are 4 stages which get progressively harder.
Topics: to the earth, lightgun, nes, game, console, longplay, complete
303
303
Jun 13, 2015
06/15
by
Valis77
movies
eye 303
favorite 1
comment 0
00:29 Lethal Enforcers I 37:41 Lethal Enforcers II: Gun Fighters
Topics: lethal Enforcers, lightgun, game, longplay, complete, sony, playstation, psx
6
6.0
May 1, 2021
05/21
by
Gustavo A. Lara (Gustavoalara)
data
eye 6
favorite 0
comment 0
Support/holder for 3 LEDs by side system for use with GUN4IR lightgun project
Topics: stl, Lightgun, gun4ir, Toy & Game Accessories, thingiverse, LED_support
5
5.0
Jul 3, 2021
07/21
by
Charles Kosman (Hexxed)
data
eye 5
favorite 0
comment 0
Designed this camera protector for the Sinden Lightgun so that I could leave it on my desk and not scratch the lens. Also wanted something to be able to easily cover the lens when configuring the system with the lightgun plugged in so my cursor wasn't always bouncing here and there. Note 1: You need to remove the included orange tip so that it fits on there. Feel free to print this in orange so you feel safer. ;) If people really really want I will create one as well that covers the orange tip...
Topics: Video Games, Sinden, thingiverse, stl, camera_protector, Lightgun
3
3.0
Oct 26, 2021
10/21
by
Lee Francis (Laf365)
data
eye 3
favorite 0
comment 0
I took the bottom off in Tinkercad as suggested by the original creator. created two mirrored objects for simplicity. no support needed, I always use a brim but that's just me. EDIT: accidentally gave objects a 1% tilt when I edited them, fixed that, now really no supports are needed, lol
Topics: Sinden, holster, stl, arcade, thingiverse, Video Games, Lightgun
7
7.0
Jun 10, 2021
06/21
by
Antoine Fitzmarie (tonyfm2)
data
eye 7
favorite 0
comment 0
Ceci est un adaptateur pour installer un micro interrupteur pour la gâchette du Namco NPC-103 guncon (G-Con45) LightGun. Inspiré par certains modèles sur le net, j'ai remixé ma propre version. Enjoy! This is an adapter to install a micro switch for the trigger on the Namco NPC-103 guncon (G-Con45) LightGun Inspired by some models on the net, I've remixed my own version. Enjoy!
Topics: Lightgun, GunCon, trigger, Video Games, thingiverse, G-Con45, stl
4
4.0
Aug 22, 2021
08/21
by
Charles Kosman (Hexxed)
data
eye 4
favorite 0
comment 0
Trigger fix mod for the Sinden Lightgun. Doesn't require any permanent changes and works with recoil or non recoil guns. If you find the Sinden trigger has too much play in either direction, this might be the print for you. If you prefer more trigger play than this print allows, you can easily break or cut off either of the raised tabs to give you more play. The blue on blue 3d print is harder to see in the first 2 pictures however the black print should show the non recoil print better. I've...
Topics: trigger, Sinden, Lightgun, Toy & Game Accessories, stl, thingiverse, mod
7
7.0
May 1, 2021
05/21
by
Gustavo A. Lara (Gustavoalara)
data
eye 7
favorite 0
comment 0
IR LEDs support/holder for 1W LEDs system version per side used on GUN4IR lightgun project
Topics: stl, lightgun, Toy & Game Accessories, gun4ir, led_support, thingiverse
4
4.0
May 1, 2021
05/21
by
Gustavo A. Lara (Gustavoalara)
data
eye 4
favorite 0
comment 0
Support/holder for 2 IR LEDs per side used on GUN4IR lightgun project
Topics: stl, lightgun, Toy & Game Accessories, gun4ir, led_support, thingiverse
3
3.0
Oct 14, 2021
10/21
by
Bradley Yen (bgyen)
data
eye 3
favorite 0
comment 0
A remix of https://www.thingiverse.com/thing:4857203 My brother bought a used Light Phaser off ebay. He did not notice the missing cover on the backside until he received it. I found that g_the_engineer already made a replacement cover. The printed part was a bit too plain for my liking (it was a work in progress), but snapped in really well -- so I made a somewhat less plain looking remix. I shrunk the outer edge to create a bit of reveal of outer edge of the hole the part is covering. I...
Topics: light phaser, thingiverse, stl, Video Games, back, lightgun, Sega
5
5.0
May 1, 2021
05/21
by
Gustavo A. Lara (Gustavoalara)
data
eye 5
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, Lightgun, gun4ir, Toy & Game Accessories, thingiverse, LED_support
4
4.0
Jun 11, 2021
06/21
by
Nicolas LOGEAIS (AreUBready)
data
eye 4
favorite 0
comment 0
This is a lightgun type stand for wiimote. Composed of 4 parts: - Support body - Trigger - Spring cover plate - Back plate A pen spring is used for the trigger return.
Topics: zapper_gun, Lightgun, wiimote, thingiverse, Zapper, WiiMote_Holder, 3D Printer Accessories, stl
3,259
3.3K
May 21, 2020
05/20
by
Sega
software
eye 3,259
favorite 7
comment 0
The homebrew copy of the Sega Ichiro game brought over to the Xbox: Virtual Cop 3
Topics: sega, virtual, virtual cop, arcade, ichiro, 2003, 2004, shooter, lightgun, sega am2
4
4.0
Aug 8, 2021
08/21
by
Charles Kosman (Hexxed)
data
eye 4
favorite 0
comment 0
Top Shot Elite DFRobot IR camera and lens holder (Apexel style) for JayBee's Gun4IR system. Fits in place of the existing top barrel lens and prevents you from having to drill out the lower barrel. Very secure without gluing anything once the gun is reassembled. Used in the PS3 gun version however the Xbox version should work too though don't have one to test with. Took Gustavo's design (https://www.thingiverse.com/thing:4686319) and remade it wider to better match the gun's aesthetics. Looks...
Topics: thingiverse, Toy & Game Accessories, Top Shot Elite, Lightgun, gun4ir, jaybee, camera_mount, stl
4
4.0
Aug 8, 2021
08/21
by
Charles Kosman (Hexxed)
data
eye 4
favorite 0
comment 0
Top Shot Elite DFRobot IR camera and lens holder (Apexel style) for JayBee's Gun4IR system. Fits in place of the existing top barrel lens and prevents you from having to drill out the lower barrel. Very secure without gluing anything once the gun is reassembled. Used in the PS3 gun version however the Xbox version should work too though don't have one to test with. Took Gustavo's design (https://www.thingiverse.com/thing:4686319) and remade it wider to better match the gun's aesthetics. Looks...
Topics: thingiverse, Toy & Game Accessories, Lens_Adapter, Top Shot Elite, Lightgun, gun4ir, jaybee,...
4
4.0
Apr 4, 2021
04/21
by
Alexander Pruss (arpruss)
data
eye 4
favorite 0
comment 0
Simple Wii remote light-gun handle. You can position it just behind the trigger and pull the trigger with the forefinger. Looks rather like a Star Trek original series phaser. You can either cut the handle out of wood and screw on the snap that goes on the Wii remote, or you can print the whole thing. I went for the wood+plastic solution as I didn't want to use up a lot of filament. This uses and bundles my [Bezier](https://www.thingiverse.com/thing:2207518) and [point...
Topics: thingiverse, lightgun, grip, wii, Star_Trek_Phaser, stl, Star_Trek, phaser, wiimote, Video Games,...
4
4.0
Jun 11, 2021
06/21
by
Michael Petersen (detsygt)
data
eye 4
favorite 0
comment 0
A simple but perfect holder for your NES Zapper.
Topics: Hagman, holder, Lightgun, Petersen, zap, light, thingiverse, 3D Printing, Nintendo, gun, NES,...
4
4.0
Jun 11, 2021
06/21
by
Matthew Fechtmeyer (Cryostatica)
data
eye 4
favorite 0
comment 0
I wanted a way to holster my lightguns without mounting them on the side of the cabinet, so I designed a holster that's meant to be inset into the front of the cabinet. It's sized for Sinden lightguns, but could easily be adjusted in your slicer to fit other lightgun dimensions.
Topics: retropie, Lightgun, video_game, Toy & Game Accessories, gaming, stl, videogame, thingiverse,...
4
4.0
Jan 19, 2022
01/22
by
gary hope (gh2020)
data
eye 4
favorite 0
comment 0
This one is very rough and I had a few issues creating some parts of the model but if you follow the instructions it should print fine for you. I printed this on an Ender 3 v2 with the following Cura Settings: Draft Quality (0.32mm) Infill 10% supports (touching plate) 20% All three parts can fit onto the bed at once and took around 12 hours to print. I would print it with the 'controller catches' at the top, see my Cura picture for an example (rotate part 3 upside down / 180 degrees - sorry i...
Topics: Lightgun, switch, Toy & Game Accessories, thingiverse, rifle, controller, gun, Joy-Con,...
3DO Manual: Drug Wars (1995)(American Laser Games)(US)
Topics: cursor, gun, button, menu, calibration, option, game, player, lightgun, screen, option button, menu...
5
5.0
May 1, 2021
05/21
by
(madmodder123)
data
eye 5
favorite 0
comment 0
I didn't like how the original had a free-floating trigger assembly and how squishy the trigger was so I added a guide rod to support a spring from a pen (plus a recess on the body to keep it captive) and added a plate to stop the whole trigger assembly from falling out. I printed mine with the two halves and epoxied them together, just print them in the orientation shown and make sure your supports run along the length of the gun so they are easier to remove. If you want to print it in one...
Topics: stl, gun, spring, pen, Lightgun, Toy & Game Accessories, light_gun, pistol, spring_loaded,...
4
4.0
Jan 7, 2021
01/21
by
Gustavo A. Lara (Gustavoalara)
data
eye 4
favorite 0
comment 0
For those that are modding their lightguns using Jaybee's project (http://forum.arcadecontrols.com/index.php?topic=161189.0 and https://github.com/JayBee-git/JB4PLG), here the adaptors I designed and used for my modded lightguns. And these are the lens I've used (https://www.aliexpress.com/item/1005001483984876.html?spm=a2g0s.9042311.0.0.27424c4dExsQGF) At the moment the adaptors are for these guns (more on the way): Guncon2 BigBen Gunstation2 Top Shot Elite Gun Logic3 P99
Topics: stl, Toy & Game Accessories, Top_Shot_Elite_Gun, lens_adaptor, Gunstation2, logic3_p99,...
8
8.0
Jan 4, 2021
01/21
by
Charles Hall (Kevinwulf0)
data
eye 8
favorite 0
comment 0
As part of a quarantine project, I decided to pick up a used Nintendo Wii online to mod, and thought it would be fun to try 3D printing the accessories for it. Unfortunately, there aren't a ton of aesthetic options for most of the lightguns. So, I decided to try my hand at remixing an existing one by combining some cool looking prop guns with it. FILES USED: WiiMote Gun by Benni12er - https://www.thingiverse.com/thing:3650953 This was the base model I used for my remix. I liked the simplicity...
Topics: videogames, controller, stl, Video Games, wiimote, Nintendo_Wii, wii_gun, video_games, Wii,...
4
4.0
Apr 27, 2021
04/21
by
Christopher Orsina (crorsina)
data
eye 4
favorite 0
comment 0
I was looking for an alternative to my Super Scope sitting upright in the corner as it has been doing for years. There are some other nice options on thingiverse, and [SNESCUBE64](https://www.thingiverse.com/SNESNESCUBE64/)'s [Super Scope Wall Mount Bracket](https://www.thingiverse.com/thing:2428929) in particular appealed to me. Upon further thought, it wasn't 100% what I had in mind, though. I wanted to be able to hang up the Super Scope with a single bracket and prevent it sliding around in...
Topics: Nintendo_Super_Scope, thingiverse, Decor, Lightgun, storage, Retro_Gaming, SNES, SNES_Super_Scope,...
10
10.0
Jan 19, 2022
01/22
by
Chris Brown (brown1985)
data
eye 10
favorite 0
comment 0
Browns Sinden Ultimate Holster with enough room for Pi / Mini PC Well Balanced. I use ASUS PN50E1 R5-4500U Barebone Mini PC as the emulation box. raspberry pi will fit, please upload your pi cases, curious what people come up with.... I Challenge You LOL Fast easy to print, no supports required i used 20% infill higher the better. Slides together nice on my printer be careful when inserting pieces together on low infill.
Topics: thingiverse, videogames, video_game, gun, Games, Sinden, mamecab, Sega, nuc, mame, nintendo,...
From the bitsavers.org collection, a scanned-in computer-related document. mitre :: ESD Technical Reports :: ESD-TR-66-289 AESOP A General Purpose Approach to Real-Time Direct Access Management Information Systems Jun66
Topics: figure, lightgun, system, data, display, organizational, file, management, flf, enter, security...
273
273
Feb 3, 2019
02/19
by
Hardy
audio
eye 273
favorite 0
comment 0
Snatcher Snatcher ist eines dieser Spiele, die leider viel weniger Beachtung finden, als sie eigentlich verdient hätten. Einer der Gründe ist natürlich, dass es in Europa nur für das Sega CD erschien, das seinerzeit ordentlich gefloppt ist, ein weiterer, dass es seitdem nur für den japanischen Markt wiederveröffentlicht wurde. Dabei hätte Snatcher auch heute noch viel Potenzial zu begeistern, da es durch seinen spannenden Mix aus tollem Storytelling voller Überraschungen,...
Topics: nerdwelten, podcast, german, deutsch, review, rezension, test, retro, game, games, spiel, spiele,...
49
49
Oct 16, 2020
10/20
by
Leostrange
software
eye 49
favorite 2
comment 0
lightgun:
Topic: lightgun
281
281
software
eye 281
favorite 0
comment 0
****UPDATE****** IF YOU RECEIVED YOUR SINDEN SINCE JAN 2022 YOU WILL NEED TO UPDATE THE SINDEN DRIVERS FOR YOUR GUN TO WORK Fully Loaded 64GB RPi4 Image for the Sinden Lightgun. As described, this image is specifically created for use with the Sinden Lightgun, other lightguns would need to be configured as required. If using other mouse devices such as a trackball or spinner, you may need to change the mouse index settings. Image runs stock clock settings; if you have a good cooling...
Topics: sinden, lightgun, rpi4, lightgun, image, rom, rpi4
227
227
Nov 19, 2013
11/13
by
kollisionsabfrage.net
movies
eye 227
favorite 0
comment 0
In Deutschland einmal ganz offiziell eine Rezension über House of the Dead machen zu dürfen, haben vermutlich nicht viele erwartet. Micha auch nicht, der sich hier die iOS-Version angesehen hat und prüft, ob sich der Lightgun-Flair auch auf Touch-Geräte übertragen lässt.
Topics: Arcade, House of the Dead, ios, ipad, Iphone, Lightgun, SEGA
