3
3.0
May 1, 2021
05/21
by
Jesse Hickman (GrimGOd)
data
eye 3
favorite 0
comment 0
Keyboard feet for a standard keyboard with or without the rubber pad insert
Topics: stl, thingiverse, keyboard_leg, keyboard, Office, keyboard_stand, keyboard_foot, Keyboard_Feet
3
3.0
Jul 3, 2021
07/21
by
Bryce (bryced)
data
eye 3
favorite 0
comment 0
This is a replacement keyboard foot for the esports keyboard by Thermaltake Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in lettering and spade. Star may need minor sanding but should push fit into the space tightly...
Topics: stl, keyboard, keyboard_leg, mechanical_keyboard, Office, thingiverse, Keyboard_Feet, keyboard_foot
2
2.0
Dec 1, 2021
12/21
by
Dara Mo (The_Food_One)
data
eye 2
favorite 0
comment 0
A keyboard bracket leg I made for personal use.
Topics: keyboard_bracket, thingiverse, keyboard_leg, stl, keyboard, Replacement Parts, keyboard_stand,...
7
7.0
Jan 19, 2021
01/21
by
Stormy Ramsay (Elodin)
data
eye 7
favorite 0
comment 0
These are the replacement tilt legs for the HP keyboard model # KU-1156 The right and left legs are labeled on the model. There are two versions, one is a rounded foot (CrvR/CrvL) and the other is flat (StrR/StrR).
Topics: keyboard_foot, Keyboard_Feet, thingiverse, Office, keyboard, keyboard_leg, keyboard_stand, stl
10
10.0
Jan 18, 2021
01/21
by
Mladjo Ocokoljic (mladjo74)
data
eye 10
favorite 0
comment 0
MS keyboard holder.
Topics: Computer, mechanical_keyboard, Keyboard_Feet, keyboard_case, thingiverse, keyboard, keyboard_stand,...
10
10.0
Apr 17, 2021
04/21
by
Peng Poo Sng (sngpp69)
data
eye 10
favorite 0
comment 0
One of my Acer wireless keyboard foot broke so I redesigned one and printed a pair. They work well for my purpose so I share here in case others need it too.
Topics: keyboard_foot, thingiverse, Keyboard_Feet, keyboard_leg, stl, Computer, keyboard, keyboard_stand
3
3.0
Jun 7, 2021
06/21
by
Joes Wezendonk (Joeswez)
data
eye 3
favorite 0
comment 0
This is a keyboard stand/foot that I made for my Trust keyboard because it broke off. I don't know if it could be used on other keyboards. Infill: 80% so it's a solid part
Topics: keyboard, keyboard_foot, keyboard_leg, thingiverse, stl, Computer, keyboard_stand, Keyboard_Feet,...
4
4.0
Oct 15, 2021
10/21
by
Allison Collins (palndrone)
data
eye 4
favorite 0
comment 0
Replacement keyboard feet for Seal Shield washable keyboards. They may fit other Seal Shield keyboards, but I've only tested them on standard washable model.
Topics: keyboard, thingiverse, keyboard_leg, keyboard_foot, stl, Keyboard_Feet, SealShield, keyboard_stand,...
2
2.0
Dec 1, 2021
12/21
by
Scott McCarthy (sgxguru)
data
eye 2
favorite 0
comment 0
This is a part I created for one of my own keyboards to replace the foot which has disappeared. I would probably reprint this as a slower print next time as I had to clean up the little nubs but it seems to work.
Topics: Computer, thingiverse, Keyboard_Feet, keyboard_leg, stl, keyboard, Logitech, log, keyboard...
3
3.0
Apr 8, 2021
04/21
by
valentin paulovic (lenVallo)
data
eye 3
favorite 0
comment 0
This is custom mount for PC keyboard, so you can have more junk on your table and dont have to worry about lost your keyboard underneath it. designed for Yenkee keyboard, but robably can be used with other brands as well. keyboard width should not be more than cca 13,5 cm mounting together with 0,3x16 screws and M3 nuts screw it to the wall or whatever with ⌀4mm wood screw
Topics: keyboard_leg, keyboard_stand, Computer, keyboard, stl, thingiverse, keyboard_mount
3
3.0
Apr 1, 2021
04/21
by
Luca (MQTThings)
data
eye 3
favorite 0
comment 0
I designed this cover for my 60% keyboard to protect it from scratches while carrying it to and from work every day. The two halves are held together by four 10x2mm magnets that are super glued into the print. The keyboard case I'm currently using is the 60% NPKC acrylic case from KBDFans. I included some files specifically for that keyboard. Print both halves and glue magnets into print (check polarity)
Topics: Computer, thingiverse, keyboard cover, mechanical_keyboard, 60% keyboard, stl, keyboard
3
3.0
Jul 3, 2021
07/21
by
Bryce (bryced)
data
eye 3
favorite 0
comment 0
Foot for mechanical keyboard by thermaltake Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in lettering and spade. Star may need minor sanding but should push fit into the space tightly and not need anything else to...
Topics: stl, keyboard, mechanical_keyboard, Office, thingiverse, Keyboard_Feet, keyboard_foot
3
3.0
May 1, 2021
05/21
by
(vortexpc)
data
eye 3
favorite 0
comment 0
Broke mine :) Simple model based on stock. Replacement feet / foot / stand, for Trust keyboard - Ziva model.
Topics: stl, thingiverse, keyboard, mechanical_keyboard, keyboard_stand, Other, keyboard_foot, trust,...
4
4.0
Mar 8, 2021
03/21
by
Kukulo Kukulovic (kukulo2011)
data
eye 4
favorite 0
comment 0
This is a Dell USB mechanical keyboard printable leg replacement. Tested with PLA filament - worked right away.
Topics: keyboard, stl, thingiverse, mechanical_keyboard, keyboard_stand, keyboard_foot, dell, keyboard_leg,...
4
4.0
Mar 15, 2021
03/21
by
Mark Villela (Markacho)
data
eye 4
favorite 0
comment 0
Replacement foot (replacement feet) for Dell keyboard model RT7D50. FreeCAD file provided. Use 100% infill, for strength.
Topics: keyboard_foot, keyboard_stand, thingiverse, Keyboard_Feet, keyboard_leg, keyboard, Computer,...
6
6.0
Mar 17, 2021
03/21
by
Michael Altvater (Maltvat)
data
eye 6
favorite 0
comment 0
Both feet on my SK-2025 keyboard broke and I didn't find a replacement that would work on thingiverse, so I created it. I will be making this 100% solid with PLA. I will use tree supports in Cura. SK_2025 KEYBOARD FOOT R_32.stl is for the right side SK_2025 KEYBOARD FOOT L_32.stl is for the left side 2/4/2019 UPDATE: The fit isn't perfect, but it works perfectly fine (if that makes sense). I will call this completed.
Topics: keyboard_stand, Keyboard_Feet, KEYBOARD, dell, keyboard_foot, stl, keyboard_leg, thingiverse,...
4
4.0
Mar 13, 2021
03/21
by
FB Minis (FBMinis)
data
eye 4
favorite 0
comment 0
A replacement tilt feet for the Logitech EX 100 keyboard
Topics: thingiverse, keyboard leg, keyboard feet, logitech, Office, keyboard, stl, keyboard foot, keyboard...
3
3.0
May 1, 2021
05/21
by
Jacques Blom (Neophyte)
data
eye 3
favorite 0
comment 0
A keyboard foot for a Logitech keyboard - a K520 in my case Fits nicely with just enough tension to stay folded if folded in.
Topics: stl, thingiverse, logitech_Keyboard, keyboard_leg, Computer, logitech_keyboard_leg, logitech,...
4
4.0
Mar 31, 2021
03/21
by
Nico (eponra)
data
eye 4
favorite 0
comment 0
I needed foots for a Dell Keyboard, but found none fitting to the Keyboard i had here, a very basic KB212-B. So i took the design for a logitech keyboard from maddavo, and threw it into Tinkercad, adjusted the sizes, et voila! We now have 7 degrees instead of 4! If you wonder if this print will fit onto your keyboard, take one of the foots out, and if its ~18.5mm wide from pin to pin it should fit. The pins have a diameter of 2mm by the way. Happy printing!
Topics: keyboard_stand, keyboard_foot, thingiverse, mechanical_keyboard, Office, stl, keyboard
447
447
Jan 19, 2012
01/12
by
Rimbault, Edward F, (Edward Francis), 1816-1876
texts
eye 447
favorite 1
comment 0
Cover title
Topics: Keyboard instruments, Keyboard harmony
7
7.0
Jan 3, 2021
01/21
by
Adam Thomas (adtgreen)
data
eye 7
favorite 0
comment 0
Keyboard kickstand for Logitech keyboard
Topics: Keyboard_Feet, stl, Office, keyboard_stand, keyboard, thingiverse
2
2.0
Sep 14, 2021
09/21
by
Jed Stott (BakedaDough)
data
eye 2
favorite 0
comment 0
Extremely simple foot for Mechwild Murphpad, was made at 7 degrees to match my Portico but could easily be changed to match other boards/angles. I've included the solidworks file if you want to change the height of the foot(Just change the angle of the "Angle of board" plane). Obviously just make sure nothing fillet/chamfer wise is extremely broken before saving and printing. Shouldnt need anything specific for print settings, i printed it upside down with the cutouts for the rubber...
Topics: stl, thingiverse, Computer, keyboard, mechanical_keyboard, keyboard_foot
4
4.0
Jan 6, 2021
01/21
by
Michael McHale (irishfez11)
data
eye 4
favorite 0
comment 0
This is a foot for a logitech keyboard.
Topics: Keyboard_Feet, stl, Computer, keyboard_stand, keyboard, thingiverse
6
6.0
Apr 20, 2021
04/21
by
William Bauer (Willyb90)
data
eye 6
favorite 0
comment 0
XD75RE CASE. Standoffs are for xd75re, may need to remove or add stand offs for 60% keyboard. USB opening is a little big, modify as you need. Assembled with super glue, and clamps. UPDATED 11/9/18: Fixed standoffs, and shrunk the plug opening.
Topics: thingiverse, 60% KEYBOARD, stl, mechanical_keyboard, Electronics, keyboard, KEYBOARD CASE, XD75RE
6
6.0
Jan 21, 2021
01/21
by
Cookie Yen (Cookieyen)
data
eye 6
favorite 0
comment 0
My msi GK-601 keyboard leg is broken. So if you facing same problem, just print it and fix it.
Topics: msi, keyboard_foot, Keyboard_Feet, thingiverse, keyboard, keyboard_leg, Computer, stl
13
13
Jan 12, 2021
01/21
by
Alan Phillips (TheBrownWelsh)
data
eye 13
favorite 0
comment 0
Does what it says on the tin; this is a leg stand for a Logitech keyboard. Sized damn near perfectly for this model, so your mileage may vary.
Topics: keyboard stand, keyboard foot, thingiverse, logitech, stl, Office, keyboard, keyboard leg
3
3.0
Jun 11, 2021
06/21
by
Teeraphat prasertsaengcharoen (lunartique)
data
eye 3
favorite 0
comment 0
A remix from doubleomarty nice looking wrist rest. It does not properly fit my YMDK split 75% keyboard so I have to make some adjustments. Original file https://www.thingiverse.com/thing:4787470 The Keyboard https://www.aliexpress.com/item/33006060286.html?channel=twinner It can support QMK and quite good, the crappy thing was its acrylic case I might have to design a case for it soon. If you are going to use with other keyboard type I have another remixes for the middle part to lengthen the...
Topics: keyboard_wrist_rest, wrist_rest, stl, Computer, thingiverse, mechanical_keyboard, split_keyboard,...
4
4.0
Mar 16, 2021
03/21
by
Zep Van de Visse (Zep2000)
data
eye 4
favorite 0
comment 0
A replacement foot for standard keyboards, fits perfectly on Logitech 2010-2020 era keyboards but probably on more and other brands.
Topics: logitech_Keyboard, keyboard_foot, keyboard_stand, thingiverse, Keyboard_Feet, keyboard_leg,...
4
4.0
Jan 4, 2021
01/21
by
Jeremy Carter (ReallyBigTeeth)
data
eye 4
favorite 0
comment 0
If you like what you see here, consider leaving a tip. I needed a way to raise my Havit low profile keyboard (model# HV-KB395L) up the the height of my midi keyboard. This is what I came up with. Print two and clip them on to your keyboard. Gives a ~65 mm rise at the front and ~71 mm at the back of the keyboard. Print a few layers of the model to test the fit with your keyboard. Scale up or down in your slicer to get the best fit.
Topics: kb395l, stl, havit keyboard riser, keyboard platform, havit, Computer, havit keyboard, havit...
8
8.0
Jan 19, 2021
01/21
by
Stormy Ramsay (Elodin)
data
eye 8
favorite 0
comment 0
Logitech keyboard tilt leg replacement for k120/mk120 and similar legs. .
Topics: keyboard_foot, Keyboard_Feet, thingiverse, Logitech_K120, Office, keyboard, keyboard_leg, stl
3
3.0
Mar 25, 2021
03/21
by
Cody R (d-man5005)
data
eye 3
favorite 0
comment 0
One of the 4° feet for my Logitech Wave keyboard was missing, and the other models I found here were for the bigger foot. I quickly designed this based off the foot I had, although it's not a perfect copy; some of the asthetic features aren't on this one, so feel free to remix it to make it a closer match. Should pop right into the keyboard.
Topics: stl, keyboard_foot, thingiverse, wave, Keyboard_Feet, keyboard, keyboard_leg, Computer,...
3
3.0
May 1, 2021
05/21
by
Jaro Meyer (pwnd)
data
eye 3
favorite 0
comment 0
I broke both feet on my Kemove 61 Snowfox keyboard, so I designed this exact copy as a replacement.
Topics: stl, kemove, keyboard_foot, Computer, keyboard, mechanical_keyboard, thingiverse, Keyboard_Feet
6
6.0
Jan 22, 2021
01/21
by
shink wawawa (shink)
data
eye 6
favorite 0
comment 0
[ Keyboard ] Logitech (logicool) K270 [ A ] foot spare part. Original one of mine had lost... size : 19.6 (24 include hinge) X 26.6 X 3 mm If same size, you can use it yours. If you could use this your keyboard , please report your Model No. for other people. Print is easier if upside down. I mean wide side down.
Topics: keyboard_foot, Keyboard_Feet, thingiverse, keyboard, Computer, stl
3
3.0
Apr 24, 2021
04/21
by
Te D'Lonra Innovation TDI (TeDlonra)
data
eye 3
favorite 0
comment 0
Replacement tilt leg for Logitech Keyboard K235 / MK235 Save USD 7.99 per 2pc on eBay
Topics: keyboard_foot, Computer, stl, keyboard_leg, thingiverse, keyboard
13
13
Jan 14, 2021
01/21
by
Keith Roberts (polecat)
data
eye 13
favorite 0
comment 0
My heavy-handed grandkids kept breaking the feet on my Logitech keyboard, I made some replacements, but they didn't last long either, so I made a more robust version, support is not really needed.but optional.
Topics: keyboard_foot, thingiverse, logitech, stl, foot, Keyboard_Feet, keyboard_leg, keyboard_stand,...
3
3.0
Apr 2, 2021
04/21
by
Teddy (SmarterTec)
data
eye 3
favorite 0
comment 0
Replacement Keyboard feet for Corsair Strafe Keyboard. I believe it also fits similar Corsair models. Includes one left and one right stl file.
Topics: Computer, thingiverse, keyboard_leg, mechanical_keyboard, corsair, stl, Keyboard_Feet, keyboard
1
1.0
Apr 20, 2022
04/22
by
Ben Pearson (benpearson)
data
eye 1
favorite 0
comment 0
I found the part of the keyboard furthest from my wrist too low, so I created these feet sleeves to go over the feet and give a little more lift to the far side of the keyboard
Topics: thingiverse, Keyboard_Feet, keyboard_foot, stl, keyboard, Office
5
5.0
Mar 5, 2021
03/21
by
Simon Skoog (DiscoAstroid)
data
eye 5
favorite 0
comment 0
wip 6x9x2 split keyboard for handwiring cherry switches
Topics: Computer, stl, mechanical_keyboard, split keyboard, keyboard, thingiverse
3
3.0
Apr 2, 2021
04/21
by
Geo For (1eurofighter12)
data
eye 3
favorite 0
comment 0
MK235 keyboard by logitech appears to have some issues when writing. Some buttons need a lot of force in order to work so I made these keys extenders. 1)Unscrew the screws under the keyboard. 2)Take it apart. 3)Stick the key extenders under the keys 4)assemble it and you are done. I only used for the letters and space. I works as a charm. P.S I used it with the brim (4mm). It seems better.
Topics: fix keyboard, buttons, thingiverse, logitech, Parts, keyboard buttons, logitech_keyboard_leg,...
4
4.0
Jun 7, 2021
06/21
by
Tim Bennett (tabiznet)
data
eye 4
favorite 0
comment 0
WASD support graciously provided the .stp file for the foot. All I did was convert it to stl via FreeCAD and test print it. It works! Released with permission :)
Topics: keyboard_foot, keyboard_leg, thingiverse, stl, Computer, mechanical_keyboard, Keyboard_Feet
6
6.0
Mar 2, 2021
03/21
by
Sven J. (Ayco)
data
eye 6
favorite 0
comment 0
Replacement Stand for the "Classic Keyboard 200" from LT
Topics: thingiverse, stl, keyboard, Keyboard_Feet, keyboard_stand, Computer
4
4.0
Mar 22, 2021
03/21
by
CHIE HAYASHIDA (chie8842)
data
eye 4
favorite 0
comment 0
Keyboard stand of Mint60.
Topics: keyboard_stand, keyboard, stl, Computer, thingiverse, keyboard_foot
2
2.0
May 1, 2021
05/21
by
Pietro Astorri (Astro_3D)
data
eye 2
favorite 0
comment 0
This is a spare sparts for keyboards. You could find also Solidworks files if you would like to customize it for your keyboard.
Topics: stl, keyboard_foot, keyboard, keyboard_stand, thingiverse, Other
3
3.0
Apr 1, 2021
04/21
by
Brian Mackenzie (speedymazda)
data
eye 3
favorite 0
comment 0
4" lift to see keys while leaned back in your chair
Topics: keyboard_stand, Computer, thingiverse, keyboard_leg, stl, keyboard
4
4.0
Apr 13, 2021
04/21
by
Tom Kerpert (alofus)
data
eye 4
favorite 0
comment 0
Replacement for a broken foot on my wife's keyboard don't ask
Topics: thingiverse, keyboard, stl, keyboard_foot, Keyboard_Feet, Office
7
7.0
Jun 10, 2021
06/21
by
ELF @T.K_DESIGN (TK_DESIGN)
data
eye 7
favorite 0
comment 0
Mitosis keyboard で使用できるキースイッチを固定するトップパネルです。
Topics: diy_keyboard, stl, Gadgets, thingiverse, keyboard, mechanical_keyboard
7
7.0
Apr 18, 2021
04/21
by
Jani Vehovar (Janko1998)
data
eye 7
favorite 0
comment 0
Keyboard foot for roccat isku.
Topics: 3D Printing, keyboard_foot, thingiverse, keyboard_leg, stl, keyboard, keyboard_stand
5
5.0
Apr 4, 2021
04/21
by
Daniel Winters (wintersd)
data
eye 5
favorite 0
comment 0
This is a small keyboard foot replacing a broken one on my HP keyboard. It's a slight redesign from the original - works great. Printed with no supports, PLA at 0.mm. I used 100% fill, since it was so small. Thanks, Enjoy!
Topics: thingiverse, keyboard_leg, Keyboard_Feet, Replacement Parts, stl, keyboard, keyboard_foot
3
3.0
May 1, 2021
05/21
by
Diogo Guimarães (HellScript)
data
eye 3
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, keyboard support, keyboard, thingiverse, keyboard stand, 3D Printing, Keyboard_Feet
8
8.0
Jan 15, 2021
01/21
by
Abou-Baker Kadmiry (akad)
data
eye 8
favorite 0
comment 0
Replacement leg/foot for ASUS keyboard model# KB73211. Note: May require minor finishing on ears if supports are not used.
Topics: keyboard_foot, thingiverse, keyboard_leg, stl, Keyboard_Feet, keyboard_stand, Replacement Parts
