8
8.0
Apr 17, 2021
04/21
by
Rene Brunnbauer (RB_3D)
data
eye 8
favorite 0
comment 0
When printing the original one, the PLA shrinks that much partially that the power button on the phone will be pressed while putting this into the dock. This remix is a bit shorter that this doesn't happen.
Topics: Galaxy S7, galaxy_s7_stand, thingiverse, stl, Mobile Phone, Samsung Galaxy S7, galaxy_s7_dock
8
8.0
Jan 15, 2021
01/21
by
Vladislav Valentinov (Valentinov)
data
eye 8
favorite 0
comment 0
This is a simple stand for Samsung Galaxy S7, with a slot for charging cable.
Topics: Mobile Phone, galaxy_s7, thingiverse, stl, samsung_galaxy_s7
12
12
texts
eye 12
favorite 0
comment 0
Topics: manualzz, manuals, Galaxy S7 edge, Galaxy S7 edge G935P, Galaxy S7, Samsung user manuals, Samsung...
9
9.0
Apr 28, 2021
04/21
by
Jose Echeverri (josecmm01)
data
eye 9
favorite 0
comment 0
This is a Speaker amplifier.
Topics: thingiverse, GALAXY S7 EDGE, stl, galaxy_s7, 3D Printing
8
8.0
Jan 15, 2021
01/21
by
Cody Soles (needforspeed123)
data
eye 8
favorite 0
comment 0
Phone holder for Galaxy S7 Edge that fits in cup holder with slot for charging cable.
Topics: Mobile Phone, galaxy_s7, thingiverse, stl, samsung_galaxy_s7
11
11
Jan 16, 2021
01/21
by
Adrian Aarbakke (SeriouslyTM)
data
eye 11
favorite 0
comment 0
I made this for personal use, and didn't originally plan to share it. But I liked how it turned out so, I thought I would share it with you. I printed it with 20% infill for testing purposes, it works fine but I would recommend to print it with 50+
Topics: galaxy_s7, thingiverse, samsung_galaxy_s7, Samsung, Mobile Phone, stl
8
8.0
Jan 17, 2021
01/21
by
Adrian Aarbakke (SeriouslyTM)
data
eye 8
favorite 0
comment 0
I printed it at 0.1mm with 35% infill and it worked great. It has a knurled surface on the sides for additional grip, so I wouldn't recommend to print it over 0.15mm
Topics: Samsung, thingiverse, galaxy_s7, Mobile Phone, stl, samsung_galaxy_s7
9
9.0
Jan 14, 2021
01/21
by
(Joemertrix)
data
eye 9
favorite 0
comment 0
I needed a S7 edge phone mount that would handle my slim case, and magsafe like micro usb adapter compatible, also I already had mounted a T shaped type phone mount in my car (looks like a rectangle when looking direct at it, and T shaped when viewed from below or above, ill post a pic of that too, as others may have similar, its from a Wilson Sleek phone cradle mount), so I put this together, I've already printed 5 or 6 of them; with then doing revisions of the design to better suit angles in...
Topics: Mobile Phone, thingiverse, stl, GALAXY_S7_EDGE, samsung_galaxy_s7
367
367
software
eye 367
favorite 0
comment 0
samsung galaxy s7 nougat
Topics: samsung, galaxy s7, nougat
9
9.0
Apr 27, 2021
04/21
by
Dennis Coulter (denco10)
data
eye 9
favorite 0
comment 0
Case was printed in TPU on a ffcp and the insert was made from the negative in 3dsmax and exported as a stl
Topics: thingiverse, samsung_galaxy_s7, stl, galaxy_s7_case, TPU, Mobile Phone
10
10.0
Jan 19, 2021
01/21
by
Philippe D. (Aerotronic)
data
eye 10
favorite 0
comment 0
A model of the S7 Galaxy (non Edge), i needed to make a thing around Dimensions are ok near +/- 0.5mm Turntable Video here: https://youtu.be/mbQl7QeY9og If f3d file needed, ask me.
Topics: Galaxy, Models, thingiverse, samsung_galaxy_s7, Samsung, galaxy_s7_mount, stl
10
10.0
Jan 13, 2021
01/21
by
Ristomatti Kykkänen (Belssi)
data
eye 10
favorite 0
comment 0
Voronoi pattern case for Samsung S7 (Not edge). Needs Supports for the sides.
Topics: Mobile Phone, thingiverse, stl, galaxy_s7_case, Samsung, samsung_galaxy_s7
11
11
Jan 18, 2021
01/21
by
Jerry Boroch (z0014nd3l2)
data
eye 11
favorite 0
comment 0
This is a remix on Scotty-G's Galaxy S7 Case - Star Trek: https://www.thingiverse.com/thing:1769848 Wich is also a remix of rsavell's Samsung Galaxy S7 Case: http://www.thingiverse.com/thing:1412951 I removed the Star Trek Logo and Enterprise silhouette. Even though I am a huge Star Trek fan, not everyone else is. So this is the same design as Scotty-G's case just with no design on the back..
Topics: Cell Phone Case, galaxy_s7, stl, thingiverse, samsung_galaxy_s7, Samsung_S7, Samsung_Galaxy, Mobile...
8
8.0
Jan 17, 2021
01/21
by
jose luis ortiz (JLOrtiz)
data
eye 8
favorite 0
comment 0
Funda para Samsung S7 flat Compatible con oculares de 44mm ya sean prismaticos, monoculares, telescopios,etc.
Topics: galaxy_s7, prismaticos, monocular, thingiverse, samsung_galaxy_s7, scope, Hobby, binoculars, stl
10
10.0
Jan 12, 2021
01/21
by
Tom Tyler (B00MSTICK)
data
eye 10
favorite 0
comment 0
Some people accessorize their shoes and clothes, others accessorize their phone cases! This is a phone case holder/organizer for the Samsung Galaxy S7. It holds 5 cases at a time. It works well with the following cases: http://www.thingiverse.com/thing:1412951 http://www.thingiverse.com/thing:1769848 http://www.thingiverse.com/thing:1734397 And I'm sure there are many others too. It will also fit some store bought cases. Feel free to tweak and modify this. If you print or make one, I'd really...
Topics: galaxy_s7, thingiverse, S7_case, phone case organizer, stl, galaxy_s7_case, phone_case, holder,...
353
353
software
eye 353
favorite 0
comment 0
Space X 2.0 Galaxy S7 custom rom
Topics: Space X 2.0, Galaxy S7
9
9.0
Mar 12, 2021
03/21
by
Jean-Christophe Heger (jcheger)
data
eye 9
favorite 0
comment 0
Yet another QI charger, specific for Samsung Galaxy S7. Fits the low cost Chinese chargers (70x10mm).
Topics: thingiverse, qi_charger, samsung_galaxy_s7, galaxy_s7, Office, qi_wireless_charger, stl
9
9.0
Jan 13, 2021
01/21
by
Timothy (oxarrogantxo)
data
eye 9
favorite 0
comment 0
Tired of bumping my phone off center of the wireless charger so I designed a dock with passive sound directing and a recess for the wireless charger to set. I designed it around the $10 yootech charger I purchased on groupon but it could easily be modified to any wireless charger. The dimensions of the phone are slightly oversized to accommodate the UAG phone case on my phone but a phone without a case and more than likely with a slim case should fit.
Topics: Mobile Phone, galaxy_s7, thingiverse, Charging_dock, stl, Yootech, Samsung, samsung_galaxy_s7
9
9.0
Apr 30, 2021
04/21
by
brian adams (unewish)
data
eye 9
favorite 0
comment 0
Designed clips to work for the regular s7 instead of Edge version. Everything else was not designed by me. Providing all pieces in separate files in case you need individual pieces.
Topics: stl, 3D Printing, gear_vr, samsung_galaxy_s7, thingiverse, galaxy_s7, cooling_fan
428
428
software
eye 428
favorite 0
comment 0
samsung galaxy s7 edge nougat
Topics: samsung, galaxy s7, edge, nougat
3,338
3.3K
software
eye 3,338
favorite 0
comment 0
Galaxy S7 USA unlocked firmware
Topics: Galaxy S7, SM-G930U, Firmware
3
3.0
Jan 4, 2021
01/21
by
Uwe Meyer (vivamus3d)
data
eye 3
favorite 0
comment 0
Simple back cover and protection for Samsung Galaxy S7 printed in TPU. No support needed
Topics: stl, samsung_galaxy_s7, Mobile Phone, Samsung_S7, thingiverse, phone_cover, galaxy_s7
3
3.0
Mar 25, 2021
03/21
by
Clement Liger (clement68320)
data
eye 3
favorite 0
comment 0
C'est une coque pour Samsung Galaxy S7 que j'ai remix pour ma mère en ajoutant une image de cheval
Topics: stl, thingiverse, cardiac, galaxy s7, samsung galaxy s7, Mobile Phone, coque, case, horse
Android 7.0 Nougat Beta Manual for Samsung Galaxy S7 and S7 Edge
Topics: android 7.0 nougat, user guide, manual, samsung galaxy s7, samsung galaxy s7 edge
5
5.0
Mar 4, 2021
03/21
by
Michael Papachristoforou (Spaz069)
data
eye 5
favorite 0
comment 0
micro b USB charging cable cover replacement of damaged cover
Topics: samsung_galaxy_s7, Samsung, galaxy_s7, thingiverse, Galaxy, cable, stl, Mobile Phone, charging
9
9.0
Jan 17, 2021
01/21
by
Oyvind Haga (oeyhaga)
data
eye 9
favorite 0
comment 0
Just a remix with the open hardware logo
Topics: galaxy_s7, open_hardware, thingiverse, samsung_galaxy_s7, Samsung_S7, Samsung, Accessories, stl
8
8.0
Jan 16, 2021
01/21
by
Max Ulrich (Norcom0s)
data
eye 8
favorite 0
comment 0
Simple Case for your Smartphone. Simply Print the two parts and Glue them together with a little bit of Cyanoacrylate. You can clip on your Smartphone case on the side of your IKEA Kopardal Bed. Slipin Case can be Printed in Vase Mode (0,4mm Shell Thickness) tested and printed in PLA
Topics: case, Slipcase, galaxy_s7, thingiverse, samsung_galaxy_s7, Mobile Phone, ikea, bed, stl
8
8.0
Apr 17, 2021
04/21
by
Patrick Hannappel (Nice1XD)
data
eye 8
favorite 0
comment 0
Can't find a screwed USB Docking Station for S7 to get a nice in Car Mirrorlink Adapter, so i created my own :) Not tested yet. USB Connector should fit the original Alpine micro-USB cable. The plan is to stick it with a dot hot glue. You need to drill 3 holes in a flat surface. One for the Cable (under the Bottom Plate), two for the M6 Screws. Minimum distance between the top of the screws and the phone: 0,5mm
Topics: galaxy_s7, Samsung_S7, thingiverse, stl, Mobile Phone, samsung_galaxy_s7, car, KFZ
9
9.0
Apr 28, 2021
04/21
by
Hendrik Vorwerk (superkartoffel)
data
eye 9
favorite 0
comment 0
Simple case for Samsung Galaxy S7. It is a tight fit and therefore only suitable for flexible filament. I took some inspiration from http://www.thingiverse.com/thing:1800736 , so thank you for sharing :) The OpenSCAD-Code is a mess, but simple enough to understand.
Topics: thingiverse, case, flexible, phone, samsung_galaxy_s7, stl, galaxy_s7, Samsung, openscad, Mobile...
10
10.0
Jan 12, 2021
01/21
by
Marko Herrmann (maggoh)
data
eye 10
favorite 0
comment 0
Inspired by aapocketz Drop-in car dock design I made this remix. Basically I built it from scratch, but due to the inspiration I wanted to give aapocketz the credits. This holder is designed for use with the Samsung Galaxy S7 Edge without any cases etc. Just the bare phone. The hole in the bottom has been designed to fit a WesternDigital Harddrive Micro USB Cable (oval shape). It is a VERY tight fit and you need some elbowgrease to get it in. But once it is there, it won't come out. The phone...
Topics: mobile_phone_holder, Mobile Phone, thingiverse, stl, GALAXY_S7_EDGE, car, samsung_galaxy_s7
9
9.0
Apr 27, 2021
04/21
by
Scott Gorin (Scotty-G)
data
eye 9
favorite 0
comment 0
Leveraging from rsavell's S7 case http://www.thingiverse.com/thing:1412951 Added a Star Trek Theme and then printed with Gold PLA. I flipped the STL file orientation for better visualization on Thingiverse. You will need to flip it over before printing. I might add black paint to the insignia and text. I did add a small piece of black construction under the enterprise to cover the partial sticker view on the back. Update - on the cut through enterprise a small piece broke off and I used clear...
Topics: Samsung_S7, thingiverse, Cell Phone Case, stl, galaxy_s7_case, galaxy_s7, Mobile Phone
9
9.0
Jan 16, 2021
01/21
by
Clement ABADIE (ClementABADIE)
data
eye 9
favorite 0
comment 0
Mount for bike for Samsung Galaxy S7 (with case). - Easy to print and assemble (screw necessary) - Fit most bike 2 possibilities : - Horizontal mount (Handlebar) - Vertical mount (Bike Stem)
Topics: samsung_galaxy_s7, Samsung, mount, bicycle, stl, openrider, handlebar_mount, thingiverse, bike,...
8
8.0
Jan 16, 2021
01/21
by
Divad AB (bourd91)
data
eye 8
favorite 0
comment 0
Printed it with FelxiSMART TPE slowly with 30 mm/s. Turns out great and fits perfectly!
Topics: Galaxy_S7, Galaxy_S7_Case, thingiverse, Smartphone_case, Linkin_Park, Mobile Phone, stl, Case
984
984
software
eye 984
favorite 0
comment 0
Download Stock G930FXXU1DQE7 Galaxy S7 SM-G930F Firmware
Topics: G930FXXU1DQE7, Galaxy S7, SM-G930F, Firmware
8
8.0
Jan 16, 2021
01/21
by
Brandon T (Drahkan)
data
eye 8
favorite 0
comment 0
I needed to do some "hands-free" filming with my phone, so I made this so that I could hold my phone with a mic stand while I was filming. It was designed to work with a Galaxy S7 inside an Incipio phone case, but if you adjust the X and/or Y size of the model before printing you should be able to get it to work with your phone as well. Currently it has been confirmed to also work with a Pixel 2 in case and Galaxy S9 as well. Suggestions: * Only print the first couple millimeters of...
Topics: galaxy_s7, mic stand, thingiverse, samsung_galaxy_s7, filming, Samsung, Mobile Phone,...
433
433
software
eye 433
favorite 0
comment 0
Download Stock G930FXXU1DQE7 Galaxy S7 SM-G930F Firmware
Topics: G930FXXU1DQE7, Galaxy S7, SM-G930F, Firmware
1,436
1.4K
data
eye 1,436
favorite 0
comment 0
G930PVPS5BQK1 Galaxy S7 SM-G930P Nougat Firmware (November 2017)
Topics: G930PVPS5BQK1, Galaxy S7, SM-G930P, Firmware
540
540
software
eye 540
favorite 0
comment 0
Space X 2.0 Galaxy S 7 Edge custom rom
Topics: Space X 2.0, Galaxy S7 Edge
4
4.0
Mar 18, 2021
03/21
by
(Zennetta)
data
eye 4
favorite 0
comment 0
Easy way to hide cracked rear glass! Printed in eSUN PLA+ (Cold White) @205/50 on Creality Ender 3 w/ Glass Bed. STP file included if you want to make easier adjustments.
Topics: Elite, EliteDangerous, thingiverse, galaxy_s7, Samsung_S7, Mobile Phone, elite_dangerous,...
12
12
Jan 9, 2021
01/21
by
Matthew Touma (mattjtouma)
data
eye 12
favorite 0
comment 0
This charging dock is designed for the Samsung Galaxy S7. The micro USB cable that comes with the phone fits snugly into a slot and can easily be removed. The phone slides smoothly into place and satisfyingly clicks in. The inside corner of the cable slot is rounded so it doesn't pinch the cable. Some minor filing may be necessary to accommodate the volume and power buttons. Please share your makes!
Topics: Galaxy, thingiverse, charging_stand, Charging_dock, stl, samsung_s7, Samsung, Gadgets, charging,...
8
8.0
Jan 15, 2021
01/21
by
flip flop (renardfm)
data
eye 8
favorite 0
comment 0
This is a wireless charging station/ craddle for Samsung Galaxy S7. The station can be pushed into the original universal mobile phone mount and is equipped with a "china-qi-module"... Use version V03_2 - i removed some of the side walls - otherwise it is a little bit to tight with the galaxy S7 (power and volume buttons)...
Topics: Mobile Phone, galaxy_s7, thingiverse, qi_wireless_charger, stl, Audi, Charging_Cradle,...
8
8.0
Jan 15, 2021
01/21
by
Jamie Jessup (Jessup461)
data
eye 8
favorite 0
comment 0
this is a remix of rmcniff slimline case. Big thanks to you sir love this case and wanted to put my touch on it. i have added the new Spider-man homecoming logo.
Topics: Mobile Phone, thingiverse, stl, galaxy_s7_case, spiderman_homecoming, Samsung, s7,...
7
7.0
Mar 25, 2021
03/21
by
Giovanni Torturella (Dkrypt)
data
eye 7
favorite 0
comment 0
Case for Galaxy S7 with the king logo from hollow knight
Topics: stl, Accessories, samsung_galaxy_s7, thingiverse
9
9.0
Jan 13, 2021
01/21
by
Petersen Petersen (Student311)
data
eye 9
favorite 0
comment 0
Made for S7 with a SpigenCase - Match Perfect!! Customized version of http://www.thingiverse.com/thing:614516 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=614516
Topics: bicycle_mount, thingiverse, Sport & Outdoors, stl, customized, bicycle, galaxy_s7_mount,...
8
8.0
Jun 20, 2021
06/21
by
Kamran Tayyab (TotallyNotKam)
data
eye 8
favorite 0
comment 0
Samsung S7 Dragon Case
Topics: galaxy_s7_case, Mobile Phone, thingiverse, s7case, samsung_galaxy_s7, stl, S7_case, case,...
10
10.0
Jan 13, 2021
01/21
by
Eric Dutkus (ericd_86)
data
eye 10
favorite 0
comment 0
I found that my phone had a higher quality video then my fake-pro so I made a tripod mount for my Galaxy S7. The nut is 1/4 inch and it should fit snug in the model. I used just a dab of super glue on the nut.
Topics: galaxy s7, thingiverse, tripod_mount, stl, Gadgets, galaxy, samsung_galaxy_s7, android,...
4
4.0
Jun 6, 2021
06/21
by
Zack Tenaglia (zook79)
data
eye 4
favorite 0
comment 0
This is a car dock for a Galaxy S7. It is designed to mount to the Samsung Galaxy Nexus official car dock. I've attached a .step, .stl, and .f3d file so that that part can be modified to fit your phone or directly printed. I've also posted just the car dock "adapter" part on thingiverse (look at my other things).
Topics: Nexus, Car_dock, galaxy_s7, car_mount, Mobile Phone, Galaxy_Nexus, thingiverse, stl,...
5
5.0
Mar 4, 2021
03/21
by
Bartosz W (Pharom)
data
eye 5
favorite 0
comment 0
Remixed the back design of the original to a hex pattern since besides fallout I also like hexes for some reason. Nothing else changed. Version 2 has a bit bolder hex design and some misc changes to the front edges.
Topics: samsung_galaxy_s7, hex, galaxy_s7, flexible, thingiverse, case, stl, TPU, phone, Mobile Phone,...
10
10.0
Jan 18, 2021
01/21
by
(3DWP)
data
eye 10
favorite 0
comment 0
This is a Samsung Galaxy S7 phone case with a rose pattern, one version with a rose shaped hole and one with the rose pattern extruded on the surface. http://www.3dwp.nl
Topics: case, phone, galaxy_s7, thingiverse, samsung_galaxy_s7, Samsung_S7, Samsung, Mobile Phone,...
9
9.0
Jan 17, 2021
01/21
by
michael dunston (ctrobotics)
data
eye 9
favorite 0
comment 0
great and perfect to manufacturer specs
Topics: Mobile Phone, samsung_galaxy_s7, stl, thingiverse
