0
0.0
Aug 18, 2022
08/22
Aug 18, 2022
by
The Data Archivist V0.01
software
eye 0
favorite 0
comment 0
https://www.arcade-museum.com/game_detail.php?game_id=9157 Punk Shot was produced by Konami in 1990. Konami released 433 different machines in our database under this trade name, starting in 1978. Other machines made by Konami during the time period Punk Shot was produced include Aliens, Lightning Fighters, Parodius Da, Over Drive, Golfing Greats, Cue Brick, Block Hole, Crime Fighters, Gradius III, and Bottom Of The Ninth. Two-on-two ghetto basketball game for one to four people. Players can...
Topics: Punk Shot, punkshot, 1990, Sport Basketball, Arcade, US, Konami, Rom, Video Game, Game,...
0
0.0
Aug 17, 2022
08/22
Aug 17, 2022
by
Atari
texts
eye 0
favorite 0
comment 0
Atari Outlaw Arcade Schematic (1976)
Topic: atari arcade outlaw
0
0.0
Aug 17, 2022
08/22
Aug 17, 2022
by
Justin Green (Deep6Arcade)
data
eye 0
favorite 0
comment 0
.25 Cent USA coin holder. No longer have to scratch the glass over your pinball machine. This will hold a stack of 14 quarters. The design is set to .16mm bellow actual quarter diameter. This ensures some grip to make the half open design work. Push a set of quarters into it and it will form fit. It brandishes a dug out bed on the bottom for last coin grab with your nail if you so desire. Please post a photo after you print it in the comments. If you would like a size to fit typical arcade...
Topics: arcade, stl, Toy & Game Accessories, pinball_parts, pinball, Pinball Accessories, thingiverse,...
0
0.0
Aug 17, 2022
08/22
Aug 17, 2022
by
Julien L (tokyo)
data
eye 0
favorite 0
comment 0
I just bough a pandora box Saga 3D and it came without a cover so..... i made one :) Fit great and protect the PCB ^^ You‘ll need 4 insert for this design (OD 4.6x5) and 4 3mm screws.
Topics: stl, Pandora, 3Dpandoras, gaming, pandora box, Games, thingiverse, arcade
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Bob Buechler (megashub)
data
eye 0
favorite 0
comment 0
This is a wall mount hook for the Sinden Pedal: https://www.sindenlightgun.com/arcadepedal/ I recommend printing two of them and mounting them on the edges of the pedal to spread the load more evenly. These are commercial-quality pedals. (Nearly) all-metal construction, thick steel, so they're heavy.
Topics: stl, wall_mount, hook, Video Games, pedal, wall_hook, thingiverse, arcade, Sinden
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
data
eye 0
favorite 0
comment 0
MAME INI Files for UltiMarc UltraStik 360 Arcade Joystick Unzip and put these in your MAME "ini" folder. In MAME, for analog games like Food Fight, you need to bring up the joystick mapping and set the U360 as the controller for AD_STICK. For every other game, you need to ADD the U360 in MAME to the main joystick's Up, Down, Left, and Right. What I mean by that is, the main joystick mapping in MAME for Up should already have a value of "Up", as if you mapped your keyboard's...
Topics: MAME, ARCADE, ULTIMARC, ULTRASTIK, ULTRASTIK360, U360, ARCADE CONTROLLER, ARCADE JOYSTICK, U360...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Cult Villain (CultVillain)
data
eye 0
favorite 0
comment 0
A mini stickless arcade controller / all button fightstick case containing a mount for the Brook Zero-Pi board, designed for desktop play. Can function with stickless layout or mixbox layout (or both) due to the position of the first button in the top row. Just enough space to house both the headerless and with-headers version of the Zero Pi. Switch holes designed for Cherry MX but I've included the SCAD so you can adjust as required for other switch types. The mounting posts can be quite...
Topics: controller, stl, Joystick, buttons, Video Games, mixbox, thingiverse, arcade
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
RileyCLZ TechStudio (RileyTechStudio)
data
eye 0
favorite 0
comment 0
This is a housing for using generic USB Arcade kits for accessibility. Any USB arcade will work as long as it uses a typical SANWA style microswitch joystick and an Easyget button to usb board. These can typically be gotten on amazon for about $20 total. Optionally, you can re-solder the K5 - K8 button connectors to the backside of the board so you can connect additional buttons through the usb joystick. Take care not to short these connections and to rotate the connector such that the same...
Topics: stl, accessibility, usb, Video Games, xac, joystick, xbox, thingiverse, arcade
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Austin Kinnealey (buddy56)
data
eye 0
favorite 0
comment 0
This drawing was imported from Autodesk Fusion 360 to Tinkercad, so some of the panels are welded together unintentionally. We CNC routered each of these panels and made a full-scale wood version, but, if you would like, I also made two 3D printable options by assembling the panels in Tinkercad.
Topics: arcade_cabinet, stl, games, Toy & Game Accessories, mamecab, MAME, cabinet, emulator,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Henry Paik (Paik4Life)
data
eye 0
favorite 0
comment 0
Remixed from https://www.thingiverse.com/dwrkoa/designs HRAP VX/V3 Door. Changelog: - Added thickness to the locking/unlocking tab to prevent breakages. That's it! All the heavy lifting and credit goes to dwrkoa who did a phenomenal job with the design, fit, etc. Incredible well-made model.
Topics: arcade stick, stl, Toy & Game Accessories, fightstick, hori, hrap, arcade_fightstick,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Conner Allred (TodoRojo)
data
eye 0
favorite 0
comment 0
A very simple easel for holding control panels for the astro city (and probably other cabs as well). I wanted a way to store my control panels safely and keep them populated. This is the result. v5 works best for 2L control panels as it gives the CP a bit more clearance so that you can rest the CP on it's far edges. v2 works fine for 1L control panels since you can place the easels in the center (basically). Check pictures for illustration. Turn them sideways and lay them flat to print. They...
Topics: stl, Hobby, astrocity, candy_cab, Control_panel, arcade_control_panel, thingiverse, arcade
Mega Force 60 - Novembre -- Décembre 1997 French Magazine for SEGA LOVER
Topics: Mega Force, 60, Novembre, Décembre, 1997, Sega, Retrogaming, Video Game, Retro Gaming, French,...
Mega Force 59 - Septembre -- Octobre 1997 French Magazine for SEGA LOVER
Topics: Mega Force, 59, Septembre, Octobre, 1997, Sega, Retrogaming, Video Game, Retro Gaming, French,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Michael Gruber (G4UT4M4)
data
eye 0
favorite 0
comment 0
To build this pinball machine you need these additional items: - 10" Android Tablet - Button encoder unit - 6 Arcade Buttons - Button cables - Tablet mounting screws - tablet USB to USB A converter You can find all these items on amazon. Alternatively you can order this set already containing all items you need: https://www.digital-pinball.com/00/mini-pinball-parts YouTube video: https://youtu.be/tARqzRTN_QQ Print settings: Standard PLA settings are fine. optimized to print without support...
Topics: arcade_cabinet, stl, Toys & Games, pinball, virtual pinball, arcade_button, flipper, digital...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Jules Honour (JustHonour)
data
eye 0
favorite 0
comment 0
Given the price of the various Hitbox type controllers, even before postage and duty are added, I thought it would be an interesting project to whip together some sort of Ghetto gamepad using a cheap Pico and the excellent [GP2040 firmware](https://gp2040.info/). Grabbing the [fighting board](https://shop.feralai.com/product/pico-fighting-board/) unfortunately wasn't possible at the time of building/writing but the parts can be soldered directly to the Pico anyway. My main criteria were: small,...
Topics: Street_Fighter, Video Games, arcade_button, tekken, Button, stl, Arcade, Fighting Games,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Mitch Palowski (FrankTheTank3r)
data
eye 0
favorite 0
comment 0
a modified bottom for the ex-max arcade fight stick made to fit my 220 cm by 220 cm printer. For information on assembly as well as obtaining the top panel for it, please refer to the original ex-max arcade fight stick thingiverse page.
Topics: arcade_stick, Video Games, stl, thingiverse, fight_stick, arcade
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Nathan Gibson (ngibson)
data
eye 0
favorite 0
comment 0
Red ball to make your Atari 2600 Joystick look like an arcade one.
Topics: Video Games, stl, Atari_2600, Joystick, thingiverse, arcade_joystick
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Long Quang (Longquang)
data
eye 0
favorite 0
comment 0
LOL Jinx stencil 3
Topics: league_of_legends, jinx_lol, stencil, stl, 2D Art, thingiverse, Wild_rift, lol, arcade, jinx
Coin Cascade Ltd were New Zealand's largest Arcade machine supplier, and from 1989 to 1999 they produced a monthly trade magazine targeting arcade operators in New Zealand. These magazines featured a mixture of local and international arcade an operator news, advertisements for new and used arcade machines, games and parts. Coin Cascade Ltd. Founded 1978, Christchurch, New Zealand by Gary Walker and Stuart Jones. Created and ran the "Time Out" chain of Arcades. P artnership between...
Topics: NZ, New Zealand, Arcade, Arcade games, pinball, videogames, coin cascade, operator, amusements
Coin Cascade Ltd were New Zealand's largest Arcade machine supplier, and from 1989 to 1999 they produced a monthly trade magazine targeting arcade operators in New Zealand. These magazines featured a mixture of local and international arcade an operator news, advertisements for new and used arcade machines, games and parts. Coin Cascade Ltd. Founded 1978, Christchurch, New Zealand by Gary Walker and Stuart Jones. Created and ran the "Time Out" chain of Arcades. P artnership between...
Topics: NZ, New Zealand, Arcade, Arcade games, pinball, videogames, coin cascade, operator, amusements
Coin Cascade Ltd were New Zealand's largest Arcade machine supplier, and from 1989 to 1999 they produced a monthly trade magazine targeting arcade operators in New Zealand. These magazines featured a mixture of local and international arcade an operator news, advertisements for new and used arcade machines, games and parts. Coin Cascade Ltd. Founded 1978, Christchurch, New Zealand by Gary Walker and Stuart Jones. Created and ran the "Time Out" chain of Arcades. P artnership between...
Topics: NZ, New Zealand, Arcade, Arcade games, pinball, videogames, coin cascade, operator, amusements
Coin Cascade Ltd were New Zealand's largest Arcade machine supplier, and from 1989 to 1999 they produced a monthly trade magazine targeting arcade operators in New Zealand. These magazines featured a mixture of local and international arcade an operator news, advertisements for new and used arcade machines, games and parts. Coin Cascade Ltd. Founded 1978, Christchurch, New Zealand by Gary Walker and Stuart Jones. Created and ran the "Time Out" chain of Arcades. P artnership between...
Topics: NZ, New Zealand, Arcade, Arcade games, pinball, videogames, coin cascade, operator, amusements
Coin Cascade Ltd were New Zealand's largest Arcade machine supplier, and from 1989 to 1999 they produced a monthly trade magazine targeting arcade operators in New Zealand. These magazines featured a mixture of local and international arcade an operator news, advertisements for new and used arcade machines, games and parts. Coin Cascade Ltd. Founded 1978, Christchurch, New Zealand by Gary Walker and Stuart Jones. Created and ran the "Time Out" chain of Arcades. P artnership between...
Topics: NZ, New Zealand, Arcade, Arcade games, pinball, videogames, coin cascade, operator, amusements
Coin Cascade Ltd were New Zealand's largest Arcade machine supplier, and from 1989 to 1999 they produced a monthly trade magazine targeting arcade operators in New Zealand. These magazines featured a mixture of local and international arcade an operator news, advertisements for new and used arcade machines, games and parts. Coin Cascade Ltd. Founded 1978, Christchurch, New Zealand by Gary Walker and Stuart Jones. Created and ran the "Time Out" chain of Arcades. P artnership between...
Topics: NZ, New Zealand, Arcade, Arcade games, pinball, videogames, coin cascade, operator, amusements
Coin Cascade Ltd were New Zealand's largest Arcade machine supplier, and from 1989 to 1999 they produced a monthly trade magazine targeting arcade operators in New Zealand. These magazines featured a mixture of local and international arcade an operator news, advertisements for new and used arcade machines, games and parts. Coin Cascade Ltd. Founded 1978, Christchurch, New Zealand by Gary Walker and Stuart Jones. Created and ran the "Time Out" chain of Arcades. P artnership between...
Topics: NZ, New Zealand, Arcade, Arcade games, pinball, videogames, coin cascade, operator, amusements
Coin Cascade Ltd were New Zealand's largest Arcade machine supplier, and from 1989 to 1999 they produced a monthly trade magazine targeting arcade operators in New Zealand. These magazines featured a mixture of local and international arcade an operator news, advertisements for new and used arcade machines, games and parts. Coin Cascade Ltd. Founded 1978, Christchurch, New Zealand by Gary Walker and Stuart Jones. Created and ran the "Time Out" chain of Arcades. P artnership between...
Topics: NZ, New Zealand, Arcade, Arcade games, pinball, videogames, coin cascade, operator, amusements
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
That Guy (The__Captain)
data
eye 0
favorite 0
comment 0
This project tries to address all the shortcomings of the original source project, and that was a LOT of shortcomings. Gone are missing holes, holes the wrong size, total misalignment of parts, parts designed to print in the wrong orientation, parts with inherent weaknesses, case covers that don't fit well, parts requiring insane or ridiculous supports. Added to the project is are jigs to help with the spacing of the 2mm steel rods and cotter pins, a vase mode case cover to cut down on print...
Topics: retropie, star_wars, arcade_cabinet, stl, Electronics, thingiverse, arcade, starwars
oin Cascade Ltd were New Zealand's largest Arcade machine supplier, and from 1989 to 1999 they produced a monthly trade magazine targeting arcade operators in New Zealand. These magazines featured a mixture of local and international arcade an operator news, advertisements for new and used arcade machines, games and parts. Coin Cascade Ltd. Founded 1978, Christchurch, New Zealand by Gary Walker and Stuart Jones. Created and ran the "Time Out" chain of Arcades. P artnership between...
Topics: NZ, New Zealand, Arcade, Arcade games, pinball, videogames, coin cascade, operator, amusements
Coin Cascade Ltd were New Zealand's largest Arcade machine supplier, and from 1989 to 1999 they produced a monthly trade magazine targeting arcade operators in New Zealand. These magazines featured a mixture of local and international arcade an operator news, advertisements for new and used arcade machines, games and parts. Coin Cascade Ltd. Founded 1978, Christchurch, New Zealand by Gary Walker and Stuart Jones. Created and ran the "Time Out" chain of Arcades. P artnership between...
Topics: NZ, New Zealand, Arcade, Arcade games, pinball, videogames, coin cascade, operator, amusements
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Jürgen Stipsits (CrazyJuergsi)
data
eye 0
favorite 0
comment 0
Simple Button Box for Simulators.
Topics: Sim_racing, arcade_button, stl, flight_controller, thingiverse, simracing, DIY, Flight_Simulator
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Tony Pol (shellant)
data
eye 0
favorite 0
comment 0
These are for Bally 1984 Mr and Mrs Pacman. I am sure that they will be the correct size for all Bally pinball machines of this era. However I can not answer that exactly. The yellow ones are actually 3mm shorter than the white ones. In Mr and Mrs Pacman there are 8 white targets and 3 yellow. I just made these as close to the same as original as possible. I also have two versions of the ghosts. One is as close as I could copy the original and the other is more like the ghosts that chase you in...
Topics: pinball_parts, Bally_pinball, pinball_machine, PacMan, pacman_arcade, stl, pacman_ghost,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
tito robertus (123titorobertus321)
data
eye 0
favorite 0
comment 0
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/54vIkETDP6g
Topics: PacMan, stl, keychain, thingiverse, 3D Printing, arcade
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
tito robertus (123titorobertus321)
data
eye 0
favorite 0
comment 0
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/5hkHDeOA6d5
Topics: invaders, space invaders, 80,s, space, stl, alien, keychain, thingiverse, 3D Printing, arcade
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Peter Ekstrom (eckie63)
data
eye 0
favorite 0
comment 0
This is a remix of [this](https://www.thingiverse.com/thing:52225) very nice restrictor plate. This version is a round restrictor for the Ultimarc Ultrastik 360 and has the standoffs needed for mounting the circuit board below the magnet. The .stl is for a 4mm thick plate. The OpenSCAD file is included, like in the original post so you can tweak it if you need to. I added variables at the top for the more common items to make it easier to tweak things like diameter, thickness, standoff height,...
Topics: ultimarc, Video Games, restrictor_plate, stl, thingiverse, arcade_joystick, joystick, ultrastik
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
anzu itou (Uiyomen)
data
eye 0
favorite 0
comment 0
Spinner used in arcade version of Arkanoid, Puchi Carat, etc. The controller was made with a 3D printer. Spinners are called paddles in Japan. Use the following parts in addition to the parts made by 3D printers. -3mm Metal shaft (aluminum in the example) 39 mm, 69 mm each. -608 bearing -M3x6mm screw Installation of sensor PCB. The mounting holes have the same dimensions as for arkanoids. Equivalent to Seimitsu Kogyo's MS base, the thickness of the screw hole is 4 mm. Since the shaft is normal...
Topics: gearbox, game, controller, arcade_cabinet, Taito, capuchinator, paddle, Video Games, stl, breakout,...
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Chad Ch (_Chadi_)
data
eye 0
favorite 0
comment 0
Support d'écran que j'ai créé pour mon projet de Bartop ou de console arcade portable, le liens de la vidéo : https://youtu.be/H1PsY7K6_iE Vous trouverez l'ensemble des informations sur les produits et leurs références dans la description de la vidéo.
Topics: chadi, Video_Game_Console, console_arcade, youtube, stl, thingiverse, DIY
0
0.0
Aug 16, 2022
08/22
Aug 16, 2022
by
Dniwe Cyber (CyberDNIWE)
data
eye 0
favorite 0
comment 0
# Swerry: universal cherry (-and alike) arcade button Ever wanted Gamerfingers or Crown/Samducksa SDB-202 with swapable Cherry MX switches of your choise but 6$ a button is too much? Try Swery instead! Fitting standart 30mm hole, Swerry button will allow you use ANY style of Cherry-like switches (including, but not limited to Kailh Box, Outemu Dustproof etc). ## Features / Differences to source * Usable universally with **ALL** types of Cherry MX -like switches * Smaller cap flaps for even less...
Topics: Toy & Game Accessories, button, Fightstick, cherry, Sanwa, stl, thingiverse, accessory,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Adam Freeman (3DFreeman)
data
eye 0
favorite 0
comment 0
Here is my take on a nearly, mostly, almost, more or less completely 3D printed arcade joystick mechanism. Just add microswitches. If you would like some joystick tops to go with this project, check out: https://www.thingiverse.com/thing:5263850 https://www.thingiverse.com/thing:5319591 If you were considering building the smaller version of the mechanism into a stand-alone joystick then check out my designs page for a selection: https://www.thingiverse.com/3dfreeman/designs Also my previously...
Topics: Video Games, stl, Arcade, Assembly, thingiverse, easy_assembly, Joystick, Mechanism
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Mas Merp (Masmerp1)
data
eye 0
favorite 0
comment 0
Ghosts from pacman
Topics: PacMan, pacman_arcade, stl, pacman_ghost, Props, thingiverse, pacman_game
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Matthew Doyle (mrd9483)
data
eye 0
favorite 0
comment 0
This is a print to create an arcade box for EG Starts Arcade Kit, found here: https://www.amazon.com/dp/B01M2X88QP?psc=1&ref=ppx_yo2ov_dt_b_product_details It's fairly compact but if you add rubber feet to it, grips the table nicely. In addition to the kit (and obviously printer) you'll need: - 4x M3 6mm screws - 7x M3 16mm screws - 4x M3 nuts Optionally, you'll need: - glue, for the cover on the joystick - rubber feet, to prevent sliding on a table Here's the suggested order, or at least...
Topics: diy, electronics, controller, Video Games, stl, thingiverse, Retrogaming, arcade
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Dniwe Cyber (CyberDNIWE)
data
eye 0
favorite 0
comment 0
# RoundBOB - MixBox Style Arcade Stick Mod One-piece MixBox / WASD adapter for Sanwa JLF- compatible sticks - replace your JLF with the good old keyboard WASD! # Features / Differences to original - Kept in place by 2-4 screws coming with arcade stick itself - Adjustable angle - Round all around # Installation - Unscrew your existing stick, taking out the screws - Put the mod on top of the hole, aligning four big holes with mounting screw holes - Put the mounting screws through both holes at...
Topics: Toy & Game Accessories, keyboard, arcade_stick, Fightstick, mechanical, stl, mechanical_switch,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
The Data Archivist V0.01
software
eye 0
favorite 0
comment 0
https://en.wikipedia.org/wiki/Strato_Fighter Strato Fighter , otherwise known as Raiga: Strato Fighter , is a 1991 video arcade game developed by Tecmo . It is a horizontally scrolling shooter in which two players may play simultaneously. The game sets players in the year 2135 on a mission to save the Earth from colony-based, militant alien invaders using the MB-OG Raiga (Thunder Fang). Gameplay The Raiga has the ability to spin around to attack enemies from behind. Power-ups can be obtained by...
Topics: Raiga - Strato Fighter, stratof, 1991, Scrolling Shooter, Shoot Em Up, SHMUP, Arcade, Tecmo, Rom,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Jeff Chen (TheJeffChen)
data
eye 0
favorite 0
comment 0
The stick on the AsciiWare PS arcade stick has the same square gate like the [Hori Fighting Stick PS](https://www.thingiverse.com/thing:5364415). So here's my attempt to fix it. Print all parts in their original orientation, with no support. You need TWO copies of the clamp on each side. A STEP template is provided for whoever wants to create their own unique shape of gate.
Topics: stick, custom, Games, arcade_stick, octagonal, restrictor, asciiware, playstation_1,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Dniwe Cyber (CyberDNIWE)
data
eye 0
favorite 0
comment 0
# Modular Arcade Fightstick Hitbox MixboxModular Arcade Fightstick Hitbox Mixbox - WHATEVERYOUWANTIT-box **Whateveryouwantit-box** is a remix (or recreation rather) of [cmanoncom's Arcade Fightstick](https://www.thingiverse.com/thing:2439344/comments "cmanoncom's Arcade Fightstick"), redesigned with customizability in mind. Unlike the soruce, it does not require plexiglass and is a fully 3D-printable case. ## Features / Differences to original - **Button holes everywhere**: more...
Topics: Toys & Games, custom_hitbox, Fightstick, HITBOX, stl, Joystick, thingiverse, arcade_joystick,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
asami kishikawa (k_asami)
data
eye 0
favorite 0
comment 0
Arcade Controller Button kailh choc v1 Snack Box Micro shadow 5.5S-01
Topics: game, button, HITBOX, stl, thingiverse, 3D Printing, arcade
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
anzu itou (Uiyomen)
data
eye 0
favorite 0
comment 0
It is a part for arcade games that breaks blocks, including arkanoids. It can be used as a replacement or as a spare for a broken slit plate. It can be used for models with a gear ratio of 1:20 and 24 slits. アルカノイドやプチカラット等のパドルに使えるスリット板です。 割れてしまった場合の予備に使えます。 ギアボックス1:20の純正アルカノイドパドルに装着する想定の24スリット。 Game example: Taito Arkanoid Taito Puchi...
Topics: game, controller, arcade_cabinet, Video Games, paddle, stl, breakout, thingiverse, spinner,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Logan Haberer (Lman06)
data
eye 0
favorite 0
comment 0
Had a co-worker (Gubbin) ask me to design and print a few of these for his custom built pinball machine and this was the end result. This was a fun project and the end result looks great!
Topics: cabinet, pinball_parts, button, slot, pinball_machine, Video Games, arcade_cabinet, coin, stl,...
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Erik Koetje (tr6coug)
data
eye 0
favorite 0
comment 0
This is a replacement optical wheel for a 4" Atari trackball used in several Atari arcade games from the 1980s. These include Missile Command, Football, Millipede, plus others. There are two versions of the wheel. The original trackballs use a 36 post wheel for both axes. So if you want the original experience use the 36 post version. I also included a 52 post version that will make the trackball more responsive. This has been tested in Missile Command and works very well to improve the...
Topics: trakball, arcade_cabinet, Video Games, stl, thingiverse, trackball, arcade_trackball, arcade
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
by
Fakey Mcfakename (Sonny_Jim)
data
eye 0
favorite 0
comment 0
Encoder wheel for Super Sprint, APB and other Atari racing games.
Topics: Toys & Games, Atari, stl, thingiverse, arcade
0
0.0
Aug 15, 2022
08/22
Aug 15, 2022
movies
eye 0
favorite 2
comment 0
Unlike the other episodes that never aired on Nick GAS, before Paramount + the only way to get this episode was buying it via iTunes. Season 1 Episode 10 Opening Toss-Up:Battle of the Bands Mikey's World:We Got Em Mall Rounds:Plaza/Atrium Video Games:Air Buster/Snow Brothers/Turrican/King of the Monsters/Super R-Type Consolation Prizes:The Hunchback of Notre Dame VHS/Nestle Quik Video Zone:Jungle Fever/Food Frenzy/Scorchia
Topics: Nickelodeon, Nick Arcade
