0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Stevie Ray (Old-Steve)
data
eye 0
favorite 0
comment 0
My Q-Tip extender My wife needed a way to make a Q tip longer. I have no idea why but I designed this little Q tip holder for her. Push the back in first then snap the front down. It’s not perfect but it does hold a Q tip. Printed in PLA 25% infill
Topics: stl, thingiverse, holder, Q tip, Q-Tip, Household
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Campbell (scampbell)
data
eye 0
favorite 0
comment 0
This is a 3D scan of a wall hanging sculpture of a Spaniel. Possibly a Springer Spaniel? Prints well laying on it's back without support.
Topics: stl, thingiverse, Sculptures
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Mc (RetromanIE)
data
eye 0
favorite 0
comment 0
A mini floppy disk for your A500 Mini. I designed this to be printable and look great with a standard FDM printer using a standard 0.4mm nozzle(Prusa, Ender etc). But I've included a lot of detail(for such a simple model) that will really come out well when printing with a 0.25mm nozzle or resin printer. A floppy disk is not just a square/rectangular thing, it has subtle curves here and there and some indentations which I've added to this. I use a tiny amount of Blu tack inside the “floppy...
Topics: Toy & Game Accessories, Amiga, a500mini, retrogamesbiz, Amiga500, stl, thingiverse
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Wilson (turkwilson)
data
eye 0
favorite 0
comment 0
Paint extension pole holder for Milwaukee Packout. Many thanks to codyrubin123 Packout Fish Stick Bracket from April 26, 2020. I use their design for the bracket and just add the holder for the pole. I use the same 8-32 hardware for this build. There are 2 pieces a bottom and a top with a hole all the way through. I use 2 top and one bottom. That way when stacked up for transport it held in several places but if separated it can still hold the pole with just the base,
Topics: stl, thingiverse, Tool Holders & Boxes
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Kuhn (Opel_Calibra_16V)
data
eye 0
favorite 0
comment 0
Falls es probleme gibt, einfach ein Kommentar hinterlassen. Gucke immer gerne das es ein Update gibt und alle damit zufrieden sind :) Bei dem Microscope muss man aufpassen, das die Kerbe auch vorhanden ist, ansonsten einfach denn anderen Haltearm verwenden (Haltearm_Microscope_ohne_Erhebung.stl) Man brauch noch: - 1 Kabelbinder zur befestigung des Microscopes - 1 Schraube M4 x 35 - 1 Mutter M4 - 1 Schraube M3 x 12 - 1 Mutter M3 - USB Microscope...
Topics: Microscope, usb_microscope, stl, usb, thingiverse, DIY
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Feldman (faultedlogic)
data
eye 0
favorite 0
comment 0
My new house came with no cabinet door or drawer pulls. I made these templates for uniformly drilling holes for all the missing drawer pulls and cabinet door knobs. These templates slip on the corner of the cabinet doors and drawer faces to be drilled, and held in place by hand. I drilled two of the 22 cabinet doors in my kitchen and opted to remove the template once I drilled about 1/8" into the door. This worked perfectly for me and should extend the life of the template. Aside from the...
Topics: bathroom, cabinet, door, Tools, template, knob, vanity, stl, drill, thingiverse, kitchen, handle,...
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Warren (_Steve)
data
eye 0
favorite 0
comment 0
This vase can be printed in vase mode or spiralize outer contour in cura, or printed in normal mode. You can uncheck spiralize outer contour to print in normal mode, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 1 or 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The vase in the photo shows vase not scaled at 100% of the stl file at 76mm wide for X and Y and Z is 115mm tall. It has not been tested for being watertight...
Topics: Containers, stl, vase, thingiverse, container, pen holder
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Rosen (Steve_53)
data
eye 0
favorite 0
comment 0
Hanger to suspend "standard" trap/skeet clay targets from a 3/8" rope.
Topics: Sport & Outdoors, stl, target_holder, thingiverse
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Solomon (reddadsteve)
data
eye 0
favorite 0
comment 0
**Update: 3/15/2022. I accidentally loaded the nose incorrectly. Correct nose has now been loaded** **Note: If you have any issues downloading any of my models from Thingiverse, I post all my models for free on PursaPrinters.org, Cults3D and MyMinifactory as well. The models can be downloaded from those sites.** ---------------------------- Pinocchio, the lead character in a film produced by Walt Disney Productions and based on the 1883 Italian children's novel The Adventures of Pinocchio by...
Topics: cartoon, stl, People, thingiverse
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Engel (Stengel99)
data
eye 0
favorite 0
comment 0
If you like puzzles and you have empty Altoids tins waiting to be repurposed, you will enjoy this puzzle. This will work fine as a stand-alone puzzle or fidget toy without the Altoids box. My original intent was to design something to fit in the tin, and a puzzle is one good option. The key to printing this successfully is to make sure the bottom layers do not weld together, so your printer should be well-tuned and calibrated. I have made every effort to leave reasonable clearances between the...
Topics: stl, thingiverse, Puzzles
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Stevie Ray (Old-Steve)
data
eye 0
favorite 0
comment 0
I really like this design. I added a 20mm hole in the bottom. I don't know why but I think it looks better this way. Printed in PLA @25% infill
Topics: rock, Art Tools, display, stl, mineral, thingiverse, display_stand, stand
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Fontana Steve (Stevogren)
data
eye 0
favorite 0
comment 0
Clip led que j'ai crée pour le poser sans vis mais avec du scotch double face. Ainsi plus de soucis que la bande led se décolle
Topics: stl, thingiverse, Other
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Smigielski (Ssmigielski)
data
eye 0
favorite 0
comment 0
A "double wide" goliath hauler with rough trailers. the only weapons are on the cab, eventually I want to craft "saddlebag" cargo crate gun emplacements. and a "cow catcher" / dozer for the front
Topics: Necromunda_Underhive, Necromunda, Games, Genestealer_cult, stl, warhammer_40k, thingiverse,...
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Johnsen (SteveJohnsen)
data
eye 0
favorite 0
comment 0
This is another version of a center finder tool for end stock (dowels, boards, pipes, etc.); with additional functionality as a 90 degree square and simple 45 degree protractor. There are two versions: 2mm (light weight) or 3mm (stiffer) walls & face. The 3mm version side walls are 2mm taller, for more rigidity and contact with the stock material. These are designed to be used with a mechanical pencil (=/ < .09mm lead) or a fine tip marker (Sharpie). Both versions have the same capacity;...
Topics: protractor, for Mechanical Pencil, center_finder, gauge, 90 and 45 Degree, square, stl,...
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Longton (stevelongton)
data
eye 0
favorite 0
comment 0
Suits KREG POCKET HOLE JIG SYSTEM KR-K4 185 Deg Nozzle 60 Deg Bed 10mm Brim Suits 34mm standard vacuum fitting
Topics: Kreg, stl, thingiverse, Hand Tools, kreg_jig, Kreg_Pocket_Hole_Jig
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Levitt (slevitt2000)
data
eye 0
favorite 0
comment 0
Quick and simple cable holder for use with a pegboard or closet peg holes
Topics: cable_holder, stl, pegboard, thingiverse, cable_management, Organization
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Levitt (slevitt2000)
data
eye 0
favorite 0
comment 0
Remix of a basic iphone stand. Widened to support iPhone 13 pro max lowered the lip to get out of the way of the screen Created a gap at the bottom Made gap at bottom wide enough to expose microphone and speaker Enjoy!
Topics: iphone13promax, Mobile Phone, Phone_Stand, stl, thingiverse, stand, iphone
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve schilling (madmac10)
data
eye 0
favorite 0
comment 0
this is a shell guide for the dillon 45acp sizing die in station one on a xl750.
Topics: dillon_xl750, xl750, stl, thingiverse, DIY, Dillon_XL650
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Levitt (slevitt2000)
data
eye 0
favorite 0
comment 0
Quick remix: Removed branding Added holes for screwdrivers Added an extra hangar for a set of pliers Enjoy!
Topics: 3D Printer Accessories, Aquila, tool_holder, stl, thingiverse
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve Levitt (slevitt2000)
data
eye 0
favorite 0
comment 0
Added a quick peg to this great organizer for use in a closet or area with a pegboard.
Topics: pegboard, clip, stl, thingiverse, peg, cable_management, cable, Organization
0
0.0
Aug 13, 2022
08/22
Aug 13, 2022
by
Steve steve (Wizard_Sleeve)
data
eye 0
favorite 0
comment 0
16mm barb fitting for Shot blasting cabinet syphon (https://www.thingiverse.com/thing:4817343) Need to enlarge outlet in syphon to 16mm for barb to fit, just push in or add glue
Topics: Tools, Barb, stl, thingiverse, bead blaster
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve Warren (_Steve)
data
eye 0
favorite 0
comment 0
This vase can be printed in vase mode or spiralize outer contour in cura, or printed in normal mode. You can uncheck spiralize outer contour to print in normal mode, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 1 or 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The vase in the photo shows vase not scaled at 100% of the stl file at 91mm wide for X and Y and Z is 112mm tall. It has not been tested for being watertight...
Topics: pen holer, Containers, stl, pencil holder, thingiverse, vase, container
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve Carroll (SteveCinVA)
data
eye 0
favorite 0
comment 0
Basic tool holder for 20mm frame tubes found on an Ender3 v2. I just wanted a simple place to hold my scraper, cutter, and pliers, while the other tools can fit in the provided box.
Topics: 3D Printer Accessories, 3d_printer, Ender3v2, tool_holder, stl, thingiverse
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve Hobson (MrHasBean)
data
eye 0
favorite 0
comment 0
My take on a DD mod for the Sovol SV02 printer, reusing the standard extruders and steppers. This was originally based on a design that no longer seems to be on here by Daniel Garrett. There are two versions. Both include BL Touch mounts, with the only difference being the height of the BL touch, one for the standard heater block and nozzle, one if you're replaced the heater block and nozzle with a Mk style block.
Topics: stl, SOVOL_SV02, thingiverse, 3D Printer Extruders
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve Meier (sdmeier)
data
eye 0
favorite 0
comment 0
Ortur Air Assist Mount for the L1-4 It may fit other laser heads, but I can only test with what I have. You will need 2 M3x8 bolt 1 M3x35 bolt 1 M3 nut I Ball Pump Needle- You will need to put something on the side of the needle to stop the air from escaping from the side. I used a small piece od duct tape.
Topics: ortur, stl, thingiverse, Other, airassist
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve Feldman (faultedlogic)
data
eye 0
favorite 0
comment 0
This is a drag friendly remix of my original housing. Instead of a clamp with two screws performing strain relief, this one has no separate clamp, nor does it require the two additional screws and nuts. Strain relief is now intended to be a nylon wire tie on the inside of the housing. Pull the cable through, strip enough of the cables outer jacket so the three wires will reach the outlet, then strip the individual wires and connect them to the outlet. Put a nylon wire tie around the cables...
Topics: stl, thingiverse, DIY
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve Stuck (ipsd1)
data
eye 0
favorite 0
comment 0
I needed a replacement servo horn for my Losi Mini T 2.0 with a Savox servo upgrade. I remixed this from one from an SC24 that adapted it to a Savox 21T. This is the short arm for when the servo has been pushed forward.
Topics: stl, thingiverse, R/C Vehicles
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve Warner (thejedi05)
data
eye 0
favorite 0
comment 0
Judge Dredd Helmet - Adult size. Split using Tinkercad and should print well.
Topics: stl, Props, thingiverse
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve hildebrand (crash8384)
data
eye 0
favorite 0
comment 0
mini drak runcam hybrid 1 and 2 nose and dvr mount remixed to specifically fit the mini Drak. board mount beefed up to prevent flex. and also mirrored to allow cabled to run on the right side of battery compartment. may have to trim mounting standoffs a tiny bit to allow the sd card lock to clear. original center section and board mount was remixed from tfmccull's filed for the nano
Topics: Ritewing_minidrak, Ritewing_Z3, ritewing_demon, ritewing, stl, thingiverse, drak,...
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve hildebrand (crash8384)
data
eye 0
favorite 0
comment 0
mini drak runcam hybrid 1 and 2 nose and dvr mount remixed to specifically fit the mini Drak. board mount beefed up to prevent flex. and also mirrored to allow cabled to run on the right side of battery compartment. may have to trim mounting standoffs a tiny bit to allow the sd card lock to clear. original center section and board mount was remixed from tfmccull's filed for the nano
Topics: Ritewing_minidrak, Ritewing_Z3, ritewing_demon, ritewing, stl, thingiverse, drak,...
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve schilling (madmac10)
data
eye 0
favorite 0
comment 0
This is my design fix for a common problem on Dillon presses.. This is a shell guide for my Dillon xl750 with 9mm dies. It prevents the shell from getting hung up on the flat portion of the resizing/decapping die in station one. It is a simple installation, just line up the boss with the shell track and press fit it to the bottom of die. there is no adjusting of the die height required.
Topics: dillon_xl750, 9mm shell guide, stl, thingiverse, DIY
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Steve Belongie (sbelongie)
data
eye 0
favorite 0
comment 0
Remix of the original making it less chunky. Also including a version with the Roku logo
Topics: roku, roku_remote, stl, thingiverse, Household
0
0.0
Aug 12, 2022
08/22
Aug 12, 2022
by
Wendy Finerman,Steve Tisch,Steve Starkey
movies
eye 0
favorite 0
comment 0
forrest gump
Topics: forrest, gump
0
0.0
Aug 11, 2022
08/22
Aug 11, 2022
by
Steve Mason
texts
eye 0
favorite 0
comment 0
#Worldwar2 #wwii #nationalsocialism #thirdreich #nsdap #jwo #nwo #communismkills #whitegenocide #music #EuropeanPride #Wehrmacht #WorldWar1 #wwi #TreatyofVersailles #jewworldorder #betterdeadthanred #newworldorder #greatestally
Topic: #Worldwar2 #wwii #nationalsocialism #thirdreich #nsdap #jwo #nwo #communismkills #whitegenocide...
0
0.0
Aug 11, 2022
08/22
Aug 11, 2022
by
Steve Wynn
etree
eye 0
favorite 0
comment 0
Steve Wynn Quartet Hameln, Germany – Sumpfblume 7-February 1998 1. When You Smile 2. Tears Won't Help 3. Epilogue 4. This Deadly Game 5. Burn 6. Why? 7. In Love With Everyone * 8. Carelessly * 9. Black Magic * 10. Motorcycle Boy * 11. Sweetness And Light * 12. Silver Lining 13. Blood From A Stone 14. That's The Way Love Is 15. Halloween 16. Boston 17. Merrittville 18. Days Of Wine And Roses 19. If My Life Was An Open Book * 20. Carolyn * Quartet: Steve Wynn, Kirk Swan, Kurt Statham, Linda...
Topic: Live concert
Source: AUD > DAT
0
0.0
Aug 11, 2022
08/22
Aug 11, 2022
by
new heights chapel - steve decker
audio
eye 0
favorite 0
comment 0
Steve Decker teaches to New Heights Chapel - COLOSSIANS 3 - 7/25/2010
Topics: new heights chapel, college heights chapel, steve decker, colossians 3, murfreesboro, tn, tennessee
0
0.0
Aug 10, 2022
08/22
Aug 10, 2022
by
Steve Savedow
texts
eye 0
favorite 0
comment 0
Sepher Rezial Hemelach The Book of The Angel Rezial
Topic: Sepher Rezial Hemelach The Book of The Angel Rezial
0
0.0
Aug 10, 2022
08/22
Aug 10, 2022
by
steve aoki
audio
eye 0
favorite 0
comment 0
STEVE AOKI
Topic: steve aoki
0
0.0
Aug 10, 2022
08/22
Aug 10, 2022
by
Harper, Steve
texts
eye 0
favorite 0
comment 0
168 pages ; 21 cm
Topics: Bible. Titus -- Criticism, interpretation, etc, Bible. Titus, Excellence -- Religious aspects --...
0
0.0
Aug 10, 2022
08/22
Aug 10, 2022
by
Amy Douglass; Steve D. Charman
data
eye 0
favorite 0
comment 0
Participants will watch videorecorded ID procedures and make judgements about eyewitness accuracy
Source: https://osf.io/mctz8/
0
0.0
Aug 10, 2022
08/22
Aug 10, 2022
by
Farrar, Steve
texts
eye 0
favorite 0
comment 0
135 p. ; 20 cm
Topics: Success -- Religious aspects -- Christianity, Young adults -- Religious life, Young adults --...
0
0.0
Aug 10, 2022
08/22
Aug 10, 2022
by
CBS directed by Steve Binder
movies
eye 0
favorite 1
comment 0
Improved color and resolution version of The Star Wars Holiday Special
Topics: Star Wars, underground, off-air recording, cult classic
0
0.0
Aug 10, 2022
08/22
Aug 10, 2022
by
Vance, Steve, 1952-
texts
eye 0
favorite 0
comment 0
0
0.0
Aug 9, 2022
08/22
Aug 9, 2022
by
new heights chapel - steve faulkner
audio
eye 0
favorite 0
comment 0
Steve Faulkner teaches to New Heights Chapel - PSALM 2 - 8/7/2022
Topics: new heights chapel, college heights chapel, steve faulkner, psalm 2, murfreesboro, tn, tennessee
0
0.0
Aug 9, 2022
08/22
Aug 9, 2022
by
Steve Thomas
audio
eye 0
favorite 0
comment 0
Steve chats with Addison Armstrong, author of The War Librarian and The Light of Luna Park, about her experiences with libraries, what she likes about writing historical fiction and dual timelines, finding story ideas in her historical research, and how her love of school supplies and ants fueled her writing life as a young girl!
Topics: libraries, librarians, podcasts, interviews, war librarian, historical fiction
0
0.0
Aug 8, 2022
08/22
Aug 8, 2022
by
Steve Jones
audio
eye 0
favorite 0
comment 0
Concert Pipeline's 379th episode featuring She Wants Revenge, in which we chat with Justin Warfield about the band breakups in 2012 and 2020, Warfield's solo album, an afro-punk Bowie tribute, his friendship with Ernie Reyes Jr., being an extra on Saved By The Bell, SWR's current tour, and what led to the band's reuniting to tour and make new music.
Topic: Concert Pipeline
0
0.0
Aug 8, 2022
08/22
Aug 8, 2022
by
Molly Bingham; Steve Connors
movies
eye 0
favorite 0
comment 0
An American documentary about the Iraqi Insurgency in the Adhamiyah neighborhood of Baghad.
Topics: iraq, iraq war, iraqi, baathist, baath, baath party, syrian, resistance, insurgency, guerrilla...
Sermon
Topics: Sermon, Church
0
0.0
Aug 7, 2022
08/22
Aug 7, 2022
by
Kevin Trutmann; Steve Heinke; Jörg Rieskamp
data
eye 0
favorite 0
comment 0
Investor's information processing and expectation formation is biased by circumstances, e.g. in terms of current investment position (gain or loss) and favorability of the news (Grosshans, Langnickel and Zeisberger, 2021; Khunen and Knutson, 2011; Khunen, 2015; Trutmann, Heinke and Rieskamp, 2022). These distortions in the beliefs also affect trading behavior and have a detrimental impact on investor's profits. OBJECTIVE. This study aims to explore a different angle of the phenomenon and to...
Source: https://osf.io/74pt2/
0
0.0
Aug 7, 2022
08/22
Aug 7, 2022
by
Kevin Trutmann; Steve Heinke; Jörg Rieskamp
data
eye 0
favorite 0
comment 0
Source: https://osf.io/4rt7m/
