3
3.0
Jun 20, 2021
06/21
by
Steve Warren (_Steve)
data
eye 3
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 166mm tall, 107mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: flower_vase, thingiverse, stl, vase, container, Containers
4
4.0
Jun 11, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 112mm tall, 78mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: container, thingiverse, pencil holder, Containers, vase, pen holder, stl
4
4.0
Jun 11, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 141mm tall, 67mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: flowers, container, thingiverse, flower vase, Containers, vase, stl
4
4.0
Jun 11, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 100mm tall, 63mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: container, pencil cup, thingiverse, Containers, vase, pen holder, stl
4
4.0
Jun 11, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 110mm tall, 62mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: container, thingiverse, pencil vase, Containers, vase, pen, pen holder, stl
3
3.0
Jan 18, 2022
01/22
by
Steve Warren (_Steve)
data
eye 3
favorite 0
comment 0
This vase can be printed in vase mode or spiralize outer contour in cura, or printed in normal mode. You can uncheck spiralize outer contour, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 1 or 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The vase in the photo shows vase not scaled at 100% of the stl file at 90mm wide for X and Y and Z is 110mm tall. It has not been tested for being watertight and probably isn't...
Topics: pen holder, vase, thingiverse, stl, pen vase, Containers, container
2
2.0
Apr 19, 2022
04/22
by
Steve Warren (_Steve)
data
eye 2
favorite 0
comment 0
This vase can be printed in vase mode or spiralize outer contour in cura, or printed in normal mode. You can uncheck spiralize outer contour to print in normal mode, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 1 or 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The vase in the photo shows vase not scaled at 100% of the stl file at 71mm wide for X and Y and Z is 110mm tall. It has not been tested for being watertight...
Topics: pen holder, thingiverse, container, vase, stl, Containers
4
4.0
Jun 10, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
These vases can be printed in spiral vase mode or spiralize outer contour in cura. Or, uncheck spiralize outer contour, set top layers to 0. Set infill to 0%. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. The pencil vase (mint colored) in the photo shows vase not scaled at 100% at 86mm wide and 112mm tall. The flower vase (beige colored) is printed at 90% in width at 92mm wide and 100% height at 162mm tall. Neither have been...
Topics: container, thingiverse, pen cup, flower vase, Containers, vase, stl
5
5.0
Jun 6, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110mm tall, 64mm wide. It is not water proof. Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, Containers, vase_mode
4
4.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110mm tall, 65mm wide. It is not water proof. Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, spiral_vase, Containers
2
2.0
Nov 30, 2021
11/21
by
Steve Warren (_Steve)
data
eye 2
favorite 0
comment 0
This vase can be printed in vase mode or spiralize outer contour in cura, or printed in normal mode. You can uncheck spiralize outer contour, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 1 or 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The photo shows vase not scaled at 100% of the stl file at 80mm wide for X and Y and Z is 110mm tall. It has not been tested for being watertight and probably isn't printed in vase...
Topics: vase, thingiverse, stl, container, pen holder, Containers
4
4.0
Jun 19, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or, uncheck spiralize outer contour, set top layers set to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows vase scaled to 108mm tall, 72mm wide. It has not been tested for being water proof. If you make it, please post a photo, I'd like to see your print! Enjoy...
Topics: thingiverse, pencil_holder, stl, vase, pen_holder, container, Containers
2
2.0
Sep 14, 2021
09/21
by
Steve Warren (_Steve)
data
eye 2
favorite 0
comment 0
This vase can be printed in spiral vase mode or spiralize outer contour in cura, but it is not required to print this way. You can uncheck spiralize outer contour, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The vase in the photo shows vase not scaled at 100% of the stl file at 60mm wide and 111mm tall. It has not been tested for being watertight and probably isn't...
Topics: stl, vase, container, thingiverse, pencil cup, pen cup, Containers
4
4.0
Jun 6, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in spiral vase mode or spiralize outer contour in cura. Or, uncheck spiralize outer contour, set top layers to 0. Set infill to 0%. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows vase scaled in the x and y to 87% at 71mm wide and z is 100% at 115mm tall. It has not been tested for being watertight. If you make it, please post a photo, I'd like to see your print! Enjoy...
Topics: thingiverse, pen holder, Containers, stl, container, vase
4
4.0
Jun 6, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Can be scaled to fit your needs. Photo shows 120mm tall, 70mm wide. It is not water proof. Enjoy...
Topics: vase, flower_vase, pencil_vase, pencil_holder, thingiverse, stl, container, Containers
4
4.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 120mm tall, 80mm wide. It is not water proof. Enjoy...
Topics: vase, flower_vase, pencil_holder, thingiverse, stl, container, Containers, vase_mode
3
3.0
Jun 12, 2021
06/21
by
Steve Warren (_Steve)
data
eye 3
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or, uncheck spiralize outer contour, set top layers to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows vase scaled to 112mm tall, 76mm wide. It has not been tested for being watertight. If you make it, please post a photo, I'd like to see your print! Enjoy...
Topics: container, thingiverse, pen cup, Containers, vase, pen holder, stl
4
4.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 112mm tall, 80mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, spiral_vase, Containers
4
4.0
Jun 6, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in spiral vase mode or spiralize outer contour. Or, uncheck spiralize outer contour, set top layers to 0. Set infill to 0%. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows vase scaled to 162mm tall, 123mm wide. It has not been tested for being watertight. If you make it, please post a photo, I'd like to see your print! Enjoy...
Topics: thingiverse, flower, Containers, stl, container, flower vase, vase
3
3.0
Apr 1, 2021
04/21
by
Steve Strickson (_steve_)
data
eye 3
favorite 0
comment 0
Just a 16mm scale oil drum / barrel
Topics: thingiverse, 16mm, oil drum, Model Furniture, oil barrel, model railway, 16mm scale, stl, garden...
3
3.0
Jun 21, 2021
06/21
by
Steve Warren (_Steve)
data
eye 3
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 107mm tall, 86mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: pen, pencil cup, thingiverse, stl, vase, container, pencil, Containers
4
4.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in sprial vase in PrusaSlicer. Or set perimeters to 2 or more and the bottom to 3 or more for a more sturdy vase. For some reason Cura didn't like the stl, it had lots of holes when sliced. Photo shows 100mm tall, 69mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy..
Topics: pencil holder, vase, pencil, pen, thingiverse, stl, container, Containers
4
4.0
Jun 20, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 112mm tall, 77mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: pen, pencil holder, thingiverse, stl, vase, container, pencil, Containers
6
6.0
Jun 6, 2021
06/21
by
Steve Warren (_Steve)
data
eye 6
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110m tall, 70mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, spiral_vase, Containers
5
5.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 120mm tall, 80mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: spiral_vase, vase, thingiverse, stl, container, pen_holder, Containers
5
5.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110mm tall, 57mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, spiral_vase, Containers
5
5.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110m tall, 68mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, Containers
5
5.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110m tall, 65mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, Containers, vase_mode
5
5.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 120m tall, 65mm wide. It is not tested for being water proof. Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, spiral_vase, Containers
5
5.0
Jun 11, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 111m tall, 75mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: spiral_vase, container, thingiverse, Containers, vase, flower_vase, pencil_holder, stl
6
6.0
Jun 10, 2021
06/21
by
Steve Warren (_Steve)
data
eye 6
favorite 0
comment 0
Print in spiral vase mode or spiralize outer contour in cura. Or, uncheck spiralize outer contour, set top layers to 0. Set infill to 0%. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows vase not scaled at 100% at 112mm wide and 102mm tall. It has not been tested for being watertight and it probably is not if printed in vase mode. If you make it, please post a photo, I'd like to see your print! Enjoy... (Notes. below....
Topics: bowl, container, thingiverse, Containers, vase, stl
4
4.0
Jun 20, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 117mm tall, 80mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: pencil cup, thingiverse, stl, vase, container, pencil, Containers
3
3.0
Jun 20, 2021
06/21
by
Steve Warren (_Steve)
data
eye 3
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or, uncheck spiralize outer contour, set top layers to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows vase scaled to 112mm tall, 88mm wide. It has not been tested for being watertight. If you make it, please post a photo, I'd like to see your print! Enjoy...
Topics: pen, pencil holder, thingiverse, pot, stl, vase, container, Containers
6
6.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 6
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110mm tall, 75mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, Containers
5
5.0
Jun 6, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 100mm tall, 95mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, Containers
5
5.0
Jun 6, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 105mm tall, 76mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, spiral_vase, Containers
6
6.0
Jun 11, 2021
06/21
by
Steve Warren (_Steve)
data
eye 6
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 115mm tall, 78mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: spiral_vase, container, thingiverse, Containers, vase, pencil_holder, stl
5
5.0
Jun 21, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 115mm tall, 61mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: thingiverse, pencil_holder, stl, vase, container, Containers, spiral_vase
5
5.0
Jun 6, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110mm tall, 70mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, Containers, vase_mode
5
5.0
Jun 6, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 190mm tall, 130mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, flower_vase, thingiverse, stl, container, spiral_vase, Containers
4
4.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 105mm tall, 70mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencilholder, thingiverse, stl, container, spiral_vase, Containers
4
4.0
Jun 20, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 112mm tall, 70mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: pen, pencil cup, thingiverse, stl, vase, container, pencil, Containers
4
4.0
Jun 11, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 115mm tall, 65mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: container, thingiverse, pencil holder, Containers, vase, pen holder, stl
3
3.0
Jun 20, 2021
06/21
by
Steve Warren (_Steve)
data
eye 3
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or, uncheck spiralize outer contour, set top layers to 0. Bottom layers set to 3 or more. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows vase scaled to 112mm tall, 72mm wide. It has not been tested for being watertight. If you make it, please post a photo, I'd like to see your print! Enjoy...
Topics: pencil cup, thingiverse, pen cup, stl, vase, container, Containers
4
4.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110mm tall, 90mm wide. It is not water proof. Enjoy...
Topics: vase, flower_vase, pencil_vase, pencil_holder, thingiverse, stl, container, Containers
5
5.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110mm tall, 75mm wide. It is not water proof. Enjoy...
Topics: vase, flower_vase, pencil_holder, thingiverse, stl, container, spiral_vase, Containers
4
4.0
Jun 6, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 160mm tall, 83mm wide. It is not water proof. Enjoy...
Topics: vase, flower_vase, thingiverse, stl, container, spiral_vase, Containers
4
4.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110mm tall, 75mm wide. It is not water proof. Enjoy...
Topics: vase, pencil_holder, thingiverse, stl, container, spiral_vase, Containers
4
4.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 4
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Top layers set to 0. Bottom layers set to 3. Can be scaled to fit your needs. Photo shows 110mm tall, 70mm wide. It is not water proof. Enjoy...
Topics: vase, flower_vase, pencil_holder, thingiverse, stl, container, spiral_vase, Containers
5
5.0
Jun 7, 2021
06/21
by
Steve Warren (_Steve)
data
eye 5
favorite 0
comment 0
Print in vase mode or spiralize outer contour. Or set top layers set to 0. Bottom layers set to 3. Set walls to 2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows 110mm tall, 68mm wide. It has not been tested for being water proof. If you make it, please post a photo. I'd like to see your print! Enjoy...
Topics: vase, pencilholder, thingiverse, stl, container, spiral_vase, Containers
