4
4.0
Jun 6, 2021
06/21
by
Justin Mills (makingstuffinSD)
data
eye 4
favorite 0
comment 0
This is a wall mounted holder for a Samsung TV remote. It was designed for the Samsung BN59-01301A remote (for a 2018 NU7200/NU7100 series UHD TV) - it may fit others. There are two versions: one with no mounting holes in the back, so you can use 3M Command adhesive or something similar to mount it; the other version has keyhole mounting holes spaced about 50 mm apart.
Topics: Household, stl, Samsung, thingiverse
11
11
Jan 9, 2021
01/21
by
Justin Mills (Chossy)
data
eye 11
favorite 0
comment 0
Simple attachment to make you anet a8 into a 2d pen plotter. Just select the size of your pen then print it out and plug it into the fan.
Topics: 3D Printer Parts, thingiverse, stl
3
3.0
Mar 19, 2021
03/21
by
Justin Mills (makingstuffinSD)
data
eye 3
favorite 0
comment 0
This is a remix of UtopianKing's 31 mm RPi camera adapter for a microscope eyepiece. I made a few changes: 1) Increased inner diameter to 32 mm to fit an Olympus CWHK eyepiece. 2) Added an LED recess/cover and camera connector notch to the camera holder to fit the V1 RPi camera. The LED is covered so it won't glare off the eyepiece. 3) Increased the mounting holes to 2 mm diameter to directly fit 2mm screws w/o drilling (this isn't working great) 4) Added ears to the lid to fit the same screws...
Topics: Biology, Olympus, microscope_adapter, thingiverse, raspberry_pi_camera, stl
4
4.0
Mar 22, 2021
03/21
by
Justin Mills (makingstuffinSD)
data
eye 4
favorite 0
comment 0
These are just two little stands to screw on to the back of your case, so it will stand up on its own. They aren't fancy but don't require any major modifications to the original case design. Just use slightly longer screws than you'd use with the original case, and it will work great. I had to use a 90 degree turn 3.5mm - RCA cable so the connection would be on the underside of the case and I wouldn't have to look at cables coming off the top.
Topics: Audio, thingiverse, stl
3
3.0
Oct 14, 2021
10/21
by
Justin Mills (makingstuffinSD)
data
eye 3
favorite 0
comment 0
These little clips hold the lid of a Sterilite 20 qt gasket box on tightly, to reduce the chance of gaps from the lid not sitting flat. This will help keep filament storage boxes nice and dry. I remixed MrPTrog's lid clips by opening the angle of the top part a little, as my new 20 qt / 19 l Sterilite gasket boxes might be a bit taller and were causing that version clip to crack at the upper joint (maybe also related to PLA vs PETG or something). These boxes were purchased at Walmart in South...
Topics: thingiverse, stl, 3D Printer Accessories, sterilite, sterilite_20qt
