ASUS ROG Phone 5 cup holder, fits all ASUS ROG Phone 5 variants.
This is a ratchet system with self locking jaws. All ports are accessible: The side USB, the bottom USB and the headphone jack.
Additional parts needed: - 1x shaft with 3 mm diameter (like this one: https://www.amazon.de/-/en/gp/product/B00OK63BME) - 3x M3x20 with washers for the bottom hole and the 2 semicircular notches - 1x M3x35 with washer for the center hole on top - 2x M3x45 with washers for the spring mounted cradle - 3x springs, around 20 mm long, the outer diameter should be smaller than 7 mm, inner diameter should be bigger than 3.5 mm (I use springs from this assortment box https://www.amazon.de/-/en/gp/product/B07WFPPXXX) - 6x small rubber feet for the jaws
I included a spacer, in case more space between the cradle and the cup holder is needed (keep in mind the 3 screws for the top part have to be longer too) as well as a ball mount, in case a universal ball mount is already available.
Also, there is no support material needed. Just align the parts as shown in the picture.
As usual, a Fusion 360 file is included for everyone to play around with.