Yet another printable Arcade Joystick. The prototypes look good, but are not yet tested under real conditions.
There are two Versions, and only two different Parts.
Version 1: for Zippy Microswitches. You will need: 4 x ZippyMicroswitches 4 x M8 Nuts or 2 x self securing M8 Nuts 1 x M8 threaded Rod, 100mm 4 x M4 Screws, 25mm 4 x M4 Nuts two drops of hot glue Different Parts: basePlateLower.stl and stickLowerHull.stl
Version 2: for thContacts switches. You will need: 4 x thContact-Switches ( like here: https://www.buerklin.com/en/contact-element/p/12g2504 ) 4 x M8 Nuts or 2 x self securing M8 Nuts 1 x M8 threaded Rod, 105mm 4 x M4 Screws, 15mm 4 x M4 Nuts six drops of hot glue Different Parts: lowerBasePlate thContacts.stl and stickLowerHull thContacts.stl