Skip to main content

Acoustical science and technology

Acoustical Society of Japan

Boundary surface control (BoSC) is a useful method of reproducing the sound field physically. However, it is challenging in the case of real-time operation. This is mainly due to the calculation cost of a lot of inverse filter convolutions to obtain reproduction signals. This paper proposes a method for reducing of number of inverse filters and implements it in 24-channel narrow directivity (shotgun) microphone array and 24-channel circularly arranged loudspeaker array. Moreover, it provides an ...



rss RSS
DESCRIPTION
Boundary surface control (BoSC) is a useful method of reproducing the sound field physically. However, it is challenging in the case of real-time operation. This is mainly due to the calculation cost of a lot of inverse filter convolutions to obtain reproduction signals. This paper proposes a method for reducing of number of inverse filters and implements it in 24-channel narrow directivity (shotgun) microphone array and 24-channel circularly arranged loudspeaker array. Moreover, it provides an experimental evaluation of the reproduction accuracy according to measurement of reproduced wavefront. The accuracy of the reproduced wavefront by the filters, whose number was reduced to less than 1/5 by proposed method, was comparable with the case of full number of filters. Finally, a system aiming at sound field reproduction in a wide frequency range was constructed by a hybrid method of reproducing with an inverse filter in the low range and directly outputting from the speaker in the direction corresponding to the microphone in the high frequency range. We confirmed that real-time processing is possible for this hybrid method by using a convolution plug-in of digital audio workstation software.
ACTIVITY

Created on
September 29
2018
bnewbold
Archivist
VIEWS

Total Views 25 (Older Stats)

ITEMS

Total Items 0 (Older Stats)

TOP REGIONS (LAST 30 DAYS)

(data not available)