This item contains the 0-Coast Max 4 Live page programmer device that was released with the v1.5.4 firmware release.
From Make Noise:
This Max for Live device is for quick remote control of the MIDI-related settings of the Make Noise 0-Coast. Place this device in the same MIDI track you are using to play the 0-Coast, and set up the input and output as normal. The controls simply send CC values to the 0-Coast as specified in the manual at http://makenoisemusic.com/content/manuals/0-coast_manual.pdf. The controls in this device do not auto-update to reflect the settings of the 0-Coast (there is not two-way communication). Note: to save settings on the 0-Coast, hold PGM_A to enter the Program Pages, then hold PGM_B to save. To restore default settings, hold PGM_A and PGM_B while powering on the 0-Coast.
Feel free to edit this device to suit your needs. Any alteration or use of this device will not be covered by Make Noise technical support. This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. Visit creativecommons.org for more information.