Skip to main content
SHOW DETAILS
up-solid down-solid
eye
Title
Date Archived
Creator
Community Video
Aug 12, 2022 ボートレース戸田
movies

eye 0

favorite 0

comment 0

出演:平成ノブシコブシ徳井健太    秋山基裕    向山美喜 (ピットリポーター) ※出演者スケジュールはこちらですhttps://www.boatrace-toda.jp/assets/img/wwl/wwlschedule_202207_08_02.png?ver=1 ※レース結果、払戻金につきましては主催者発表のものとご確認お願い致します。 ※生放送にはタイムラグが生じます。舟券購入の際はご注意ください...
Topics: Youtube, video, Sports
Community Video
Aug 11, 2022 ボートレース戸田
movies

eye 0

favorite 0

comment 0

出演:怪獣すーなか    河路由希子    向山美喜 (ピットリポーター) ※出演者スケジュールはこちらですhttps://www.boatrace-toda.jp/assets/img/wwl/wwlschedule_202207_08_02.png?ver=1 ※レース結果、払戻金につきましては主催者発表のものとご確認お願い致します。 ※生放送にはタイムラグが生じます。舟券購入の際はご注意ください...
Topics: Youtube, video, Sports
Kraut and Tea (commentator)
Aug 11, 2022 Kraut
movies

eye 0

favorite 0

comment 0

Check out Surfshark VPN at https://Surfshark.deals/kraut Many thanks to my friend @Ravignon for working with me on this video. You can find his youtube channel here: https://www.youtube.com/c/RavignonCh and all his other social media as well as ways to support him here: https://ravignon.carrd.co/ What is feudalism? A common historic materialist perception of feudalism is that it was an economic social order, enforced by a warrior elite with the help of the Christian church to exploit a European...
Topics: Youtube, video, Education, Kraut, Countryball, Polandball, Documentary, History, Europe, Tribalism,...
Community Video
movies

eye 0

favorite 0

comment 0

※レース結果、払戻金につきましては主催者発表のものとご確認お願い致します ※生放送にはタイムラグが生じます、舟券購入の際はご注意ください ※回線の環境上、映像の乱れや切断、大幅な遅延が生じる場合があります ※配信が重くなった場合はご視聴の画質を下げてご覧ください Source: https://www.youtube.com/watch?v=fZxbTUh-syI Uploader: ボートレース戸田
Topics: Youtube, video, Sports
Community Video
movies

eye 0

favorite 0

comment 0

※レース結果、払戻金につきましては主催者発表のものとご確認お願い致します ※生放送にはタイムラグが生じます、舟券購入の際はご注意ください ※回線の環境上、映像の乱れや切断、大幅な遅延が生じる場合があります ※配信が重くなった場合はご視聴の画質を下げてご覧ください Source: https://www.youtube.com/watch?v=RFVeB80YPb8 Uploader: ボートレース戸田
Topics: Youtube, video, Sports
Tubeup
movies

eye 0

favorite 0

comment 0

CNC table probes allow us to use the Fusion 360 Break Control feature! This means we can re-probe any time to make sure the tool isn't broken or pulled out from the holder. Let's walk through how to program break control in Fusion 360 and make it FASTER with custom code! 00:00 Why Table Probes Are Great 00:30 Programming Fusion 360 Break Control via Manual NC 01:07 Programming Break Control via Tool Settings 01:48 WARNING & How to Add Custom Code to Probe Faster 02:48 Renishaw PDF& Haas...
Topics: Youtube, video, Science & Technology, tormach, fusion 360, how to, cnc, machine shop, nyc cnc,...
Tubeup
movies

eye 0

favorite 0

comment 0

Johnny 5, Tormach microARC 4th Axis Machining, and CAM Workflow Tips and Tricks in Fusion 360! Johnny 5 can move and groove but we still need a few parts to finish the mechanical build. Today, we'll mill parts on the Tormach 1100MX with the microARC 4th Axis that attach the head to the body! The focus is production simplicity not cycle time. 00:00 See Johnny 5 Move! 00:26 The benefits of using aluminum round bar 00:57 Side 1: Facing with 2D Contour 01:58 Tormach 1100MX Mills Off Chuck Jaws for...
Topics: Youtube, video, Science & Technology, tormach, fusion 360, how to, cnc, machine shop, nyc cnc,...
Tubeup
Aug 10, 2022 NYC CNC
movies

eye 0

favorite 0

comment 0

From the New York 'burbs all the way to Ohio, Judd's been by my side since my CNC journey began 11 years ago. I lost Judd last week and, although it was a painful experience and frankly a terrible week, I want to celebrate the amazing dog that he was! Enjoy this stroll down memory lane and as I share all the wonderful ways that Judd shaped me, my family, and Saunders Machine Works. Hug your pets extra tight for me! Source: https://www.youtube.com/watch?v=6kqw5KyYCWw Uploader: NYC CNC
Topics: Youtube, video, Science & Technology, tormach, fusion 360, how to, cnc, machine shop, nyc cnc,...
Tubeup
Aug 10, 2022 NYC CNC
movies

eye 0

favorite 0

comment 0

Tombstones for horizontal CNC machines are typically made of cast iron and are a great option in terms of rigidity but milling cast iron is messy! After purchasing our first few tombstones, we decided to make our own out of epoxy and aluminum. If you listen to the Business of Machining Podcast with John Grimsmo and I, you know I'm a stickler for not taking on projects just because you can. Let's talk about why this project did make sense for us, how we made it, things we learned, and what we...
Topics: Youtube, video, Science & Technology, fusion 360, how to, cnc, machine shop, nyc cnc, DIY,...
Tubeup
Aug 10, 2022 NYC CNC
movies

eye 0

favorite 0

comment 0

Fusion 360 3D Contour Toolpath deep dive with common bugs, tips, and tricks! Let's troubleshoot and examine this CAM toolpath to figure out ways to improve it! 00:00 The Problem: Tool Much Air Cutting! 00:20 Starting Over Can Help! 00:58 Adjust Tool Containment 01:44 How Endmills Affect Toolpaths: Ball Nose Endmill VS. Bull Nose Endmill 02:42 What Causes Errant, Weird, Dippy Toolpaths? Tessellations & Tolerance Value 04:10 Hardcoding a Negative Additional Offset or Editing Expressions 05:04...
Topics: Youtube, video, Science & Technology, tormach, fusion 360, how to, cnc, machine shop, nyc cnc,...
Tubeup
movies

eye 0

favorite 0

comment 0

The cartridge of the Austro-Hungarian 1867/77 M Werndl rifle is reloaded to exact military specifications with 24 g paper patched bullet exiting the bore with 430 m/s. Please support us at https://www.patreon.com/capandball For buying Capandball Civil War cartridge boxes, cartridge formers, authentic powder measures, rubber arsenal label stamps and US arsenal Stadias: http://stores.ebay.com/Capandball?_trksid=p2047675.l2563 or the Capandball webpage:...
Topics: Youtube, video, Science & Technology, werndl rifle, austro hungarian monarchy, 11.15x58R,...
Tubeup
movies

eye 0

favorite 0

comment 0

This episode of Capandball's time travels will guide you to the 19th century Pest and Buda, Hungary to know the problems of the gunsmiths of the city. While we follow the history of Anton and Matthias Zoller, target gun makers of the era, we will of course shoot one of their rifles to understand how to develop a load for an original percussion rifle. Enjoy! Magyar cikk: https://kapszli.hu/zoller-antal-es-matyas-a-czelpuskak-kiralyai/ Please support us at https://www.patreon.com/capandball For...
Topics: Youtube, video, Science & Technology, capandball, percussion target rifle, anton zoller,...
Tubeup
Aug 10, 2022 britishmuzzleloaders
movies

eye 0

favorite 0

comment 0

If you would like to support the Channel you can do so through our Patreon Page. https://www.patreon.com/britishmuzzleloaders Thanks to Linda for the group photo on the title! And Follow us on FB for updates and projects! https://www.facebook.com/britishmuzzleloaders/ For your Martini and Snider needs email Martyn at xringservices@yahoo.com For your P53 Enfield Rifle-Musket or Short Rifle ammunition needs, Contact Brett at - www.papercartridges.com And for further reading on all British...
Topics: Youtube, video, Entertainment, SMLE, 303, Enfield, rifle musket, black powder, BF1, battlefield 1,...
Tubeup
Aug 10, 2022 britishmuzzleloaders
movies

eye 0

favorite 0

comment 0

If you would like to support the Channel you can do so through our Patreon Page. https://www.patreon.com/britishmuzzleloaders And Follow us on FB for updates and projects! https://www.facebook.com/britishmuzzleloaders/ Guy and Leonard West's books can be found here: http://www.woodfieldpublishing.co.uk Thanks to the Royal Armouries for the use of some of their images. For your Martini and Snider needs email Martyn at xringservices@yahoo.com For your P53 Enfield Rifle-Musket or Short Rifle...
Topics: Youtube, video, Entertainment, SMLE, 303, Enfield, rifle musket, black powder, BF1, battlefield 1,...
Tubeup
Aug 10, 2022 SilencerCo
movies

eye 0

favorite 0

comment 0

SilencerCo's Osprey 2.0 Demo - See it in action! ► https://silencerco.com/silencers/osprey-2-0/ We used the new Osprey 2.0 on a variety of hosts so you can see the versatility in action. Same great sound and look, the upgraded button for indexing is sure to be a game changer. The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound...
Topics: Youtube, video, Sports, silencerco, silencer, suppressor, swr, omega, octane, osprey, saker,...
Tubeup
movies

eye 0

favorite 0

comment 0

Source: https://www.youtube.com/watch?v=4j4_p4v0DJI Uploader: SilencerCo
Topics: Youtube, video, Sports
Tubeup
Aug 10, 2022 SilencerCo
movies

eye 0

favorite 0

comment 0

How To: Osprey 2.0 ► https://silencerco.com/silencers/osprey-2-0/ Time Stamp steps below 👇 0:00 Intro 0:30 Install 1:30 Build Piston Assembly 2:10 Mount to Fixed Barrel Host 2:54 Clean Indexing System 4:13 Reassemble Osprey 2.0 We used the new Osprey 2.0 on a variety of hosts so you can see the versatility in action. Same great sound and look, the upgraded button for indexing is sure to be a game changer. The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer...
Topics: Youtube, video, Sports, silencerco, silencer, suppressor, swr, omega, octane, osprey, saker,...
Tubeup
Aug 10, 2022 SilencerCo
movies

eye 0

favorite 0

comment 0

SilencerCo Osprey 2.0 - NOW WITH 100% MORE BUTTON! ► https://silencerco.com/silencers/osprey-2-0/ The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound performance. The Osprey utilizes a push button locking system for quick indexing. This system allows the majority of the suppressor to sit below the shooter’s line of sight, therby not...
Topics: Youtube, video, Sports, silencerco, silencer, suppressor, swr, omega, octane, osprey, saker,...
Tubeup
Aug 10, 2022 Rob Pincus
movies

eye 0

favorite 0

comment 0

When iprintsh!t said he was gonna bring some cool stuff to the range, I had absolutely No Idea that he was gonna show up with this beast…. Of course, I had to shoot it! Lower Designed by @3D_arms Source: https://www.youtube.com/watch?v=JRf4I93tBo8 Uploader: Rob Pincus
Topics: Youtube, video, Film & Animation
Tubeup
Aug 10, 2022 Rob Pincus
movies

eye 0

favorite 0

comment 0

Some images & video from several of Rob Pincus’ Classes in Nevada, California and Nebraska. Learn more about the tour and classes from the entire team of instructors at pdntrainingtour.com. Hosts: Reno Guns & Range Exeter Gunslingers DE Guns.net Courses: Active Shooter Response Intuitive Defensive Carbine Two Person Armed Defense (x2) Armed Home Defense (x2) Armed Defense Around Vehicles Tour Sponsors: Primary Arms Online USCCA Vaultek Safe Canik Arms NEMO Arms NLT SIRT Pistols Rapid...
Topics: Youtube, video, Film & Animation
Tubeup
movies

eye 0

favorite 0

comment 0

Some quick thoughts from Rob Pincus after shooting his NEMO Battle Light rifle with the 1-8 Prinary Arms LPVO in Don Edward’s DMR Course. The Greenline Tactical class was part of the Personal Defense Network Training Tour and was hosted by Tactical Response in Tennessee, July 18 & 19, 2022 Pdntrainingtour.com Greenlinetactical.com Primaryarms.com Nemoarms.com Source: https://www.youtube.com/watch?v=tLzDm8UUvYI Uploader: Rob Pincus
Topics: Youtube, video, Film & Animation
Tubeup
Aug 10, 2022 Rob Pincus
movies

eye 0

favorite 0

comment 0

Jeffrey Abraham (@Not Right Shooters ) and I spent a lovely afternoon on the range together recently in GA… and, we couldn’t leave the range without some good natured competitions. Righty vs Lefty! In this competition, we took turns shooting in improvised positions at the target that was 540 Yards away. This was the Third Competition …and, Jeffrey kicked my ass, taking the W and winning the Competition Series 2:1! Jeffrey Abraham shot with: Rifle: Seekins Precision HIT Rifle in 6.5...
Topics: Youtube, video, Film & Animation
Tubeup
Aug 10, 2022 Magpul
movies

eye 0

favorite 0

comment 0

Ryan and Mojo open up the discussion on plate carrier fitment in our latest Magpul Extended Minute. If you see a buddy sagging, tap him on the shoulder and get him squared away. Source: https://www.youtube.com/watch?v=Z8zbandP1_o Uploader: Magpul
Topics: Youtube, video, Science & Technology
Tubeup
Aug 10, 2022 Magpul
movies

eye 0

favorite 0

comment 0

Another Texas 3 Gun Championship done and dusted. This is the premiere 3 gun match in the United States and it's easy to see why. Aaron and Co utilize the natural terrain at Reveille Peak Ranch to build incredible stages which are staffed by the best ROs in the game. Learn more at: https://bit.ly/3yBiTRB Source: https://www.youtube.com/watch?v=YmNZl5AjlXo Uploader: Magpul
Topics: Youtube, video, Science & Technology
Tubeup
Aug 10, 2022 Magpul
movies

eye 0

favorite 0

comment 0

Source: https://www.youtube.com/watch?v=wx4kDPFiY0I Uploader: Magpul
Topics: Youtube, video, Science & Technology
Tubeup
Aug 10, 2022 Magpul
movies

eye 0

favorite 0

comment 0

Detroit Tigers hat not included. Shop now at: https://bit.ly/3amGyM0 Source: https://www.youtube.com/watch?v=Gn2eCaQJmJg Uploader: Magpul
Topics: Youtube, video, Science & Technology
Tubeup
Aug 10, 2022 Magpul
movies

eye 0

favorite 0

comment 0

The MOE Bipod is the latest and lightest bipod in our extensive Bipod line. At 8oz, it weighs almost 40% less than some of our existing bipods, while still providing a dependable, stable platform to shoot from. Now Shipping in Black and FDE at: https://bit.ly/3uYynwD Source: https://www.youtube.com/watch?v=lVu_QcciSZE Uploader: Magpul
Topics: Youtube, video, Science & Technology
Tubeup
Aug 10, 2022 Magpul
movies

eye 0

favorite 0

comment 0

Unmatched ballistic protection in two new styles: The all-new Rift & Ascent are focused on protecting you when you are moving fast and working hard. Shop now at: https://bit.ly/3ySVoU1 Source: https://www.youtube.com/watch?v=FY3g0pfPxYw Uploader: Magpul
Topics: Youtube, video, Science & Technology
Tubeup
Aug 10, 2022 Magpul
movies

eye 0

favorite 0

comment 0

In our latest Extended Minute, Rick at Achilles Heel Tactical gives us a quick overview on positioning to find a stable shooting stance. To learn more, head over to achillesheeltactical.com and get some training. Source: https://www.youtube.com/watch?v=4jGEhFVAU8Q Uploader: Magpul
Topics: Youtube, video, Science & Technology
Tubeup
Aug 10, 2022 Haley Strategic Partners
movies

eye 0

favorite 0

comment 0

Source: https://www.youtube.com/watch?v=6pGt-nAw8to Uploader: Haley Strategic Partners
Topics: Youtube, video, People & Blogs
Tubeup
Aug 10, 2022 Haley Strategic Partners
movies

eye 0

favorite 0

comment 0

Battle belts have been used by warfighters dating back to the first American Revolutionary War. The application of the latest technologies in American made materials and over 240 years of battle belt history have combined to form our D3 BELT. As we know, any structure is only as strong as its foundation. Influenced by decades of operational use the D3 BELT delivers optimal synergy between belt rigidity and comfort and closes with the proven Cobra buckle. The best equipment in the world borne on...
Topics: Youtube, video, People & Blogs, GUN BELT, GUN BELT SETUP, D3 BELT, HALEY STRATEGIC BELT, HALEY...
Tubeup
Aug 10, 2022 Haley Strategic Partners
movies

eye 0

favorite 0

comment 0

Source: https://www.youtube.com/watch?v=bj-UI31Jn_M Uploader: Haley Strategic Partners
Topics: Youtube, video, People & Blogs
Tubeup
Aug 10, 2022 Haley Strategic Partners
movies

eye 0

favorite 0

comment 0

Battle belts have been used by warfighters dating back to the first American Revolutionary War. The application of the latest technologies in American made materials and over 240 years of battle belt history have combined to form our D3 BELT. As we know, any structure is only as strong as its foundation. Influenced by decades of operational use the D3 BELT delivers optimal synergy between belt rigidity and comfort and closes with the proven Cobra buckle. The best equipment in the world borne on...
Topics: Youtube, video, People & Blogs, GUN BELT, GUN BELT SETUP, D3 BELT, HALEY STRATEGIC BELT, HALEY...
Tubeup
Aug 10, 2022 Garand Thumb
movies

eye 0

favorite 0

comment 0

The Basics of Clearing a Room and CQB is both deceptively simple and grossly complex. This video won't make you an expert or even a beginner. This video serves as a primer for follow on training in room clearing and CQB. I hope you enjoy today's Part 2 of Urban Survival. Room Clearing. 00:00 Basics of Room Clearing and CQB 2:11 Basics of Room Clearing and CQB - Orion Training Group 4:00 Basics of Room Clearing and CQB - Assessing the Doorway 8:05 Basics of Room Clearing and CQB - Two man team...
Topics: Youtube, video, Education, Room clearing, Clearing a Room, CQB, basics of CQB, basic room clearing,...
Tubeup
Aug 10, 2022 Garand Thumb
movies

eye 0

favorite 0

comment 0

Thanks to Established Titles for sponsoring this video! Get 10% off on any purchase with code GARANDTHUMB. Go to https://establishedtitles.com/GARANDTHUMB and help support the channel! The US Army's new belt fed Machine gun the M250 will be replacing the M249 SAW, the world is changing. Today we visit Sig and are given the rundown on the new belt fed machine gun that US Service Members will be carrying. The M250 fires the potent 6.8x51 (277 Fury) Hybrid cased round. It should be noted that due...
Topics: Youtube, video, Education, SIG M250, us armys new beltfed, beltfed machinegun, beltfed, m249...
Tubeup
Aug 10, 2022 Garand Thumb
movies

eye 0

favorite 0

comment 0

The PTR 91 is an American made copy of the legendary HK G3. Heckler and Koch are known for impressive engineering so the question is how does the PTR 91 compare? In today's video we put the PTR 91 through it's paces to see how it does. 00:00 The PTR 91 2:50 The Saga of the Battle Rifle 6:09 Muzzle of the PTR 91 6:57 PTR 91 Barrel and Accuracy 11:04 Reloading the PTR 91 / HK3 12:40 Many problems with the PTR 91 16:13 PTR 91 trigger 20:07 Final thoughts on the PTR 91 Patreon Signup -...
Topics: Youtube, video, Education, ptr 91, hk 91, hk g3, 7.62 nato, battle rifle, auto snipe, rainbow six,...
Tubeup
Aug 10, 2022 Garand Thumb
movies

eye 0

favorite 0

comment 0

The Obrez is without a doubt one of the worst weapons I have ever handled. It's a Mosin Nagant made into a pistol and was done as a necessity in a time and place where pistols were scarce but a concealable weapon was needed. The results was the most cursed of all guns to have ever been made. Today we review the Obrez. 00:00 The Obrez, the most cursed of all guns 3:03 Big thank you to the SDI! 4:07 Differences between Obrez and Mosin Nagant 6:48 Obrez bullet experiment 10:40 Obrez ballistic gel...
Topics: Youtube, video, Education, obrez, the obrez, obrez pistol firing, mosin nagant, sawed off, obrez...
Tubeup
Aug 10, 2022 Garand Thumb
movies

eye 0

favorite 0

comment 0

How to stop a Mass Shooter. Here at Garand Thumb we believe very strongly in the actions of Mr. Dicken and in the carrying of concealed handguns. Mr. Dicken's actions ultimately saved many lives. There is much to learn from what occurred. 00:00 How to Stop a Mass Shooter, The Dicken drill 2:37 Your life will likely be peaceful, but it may not be 4:00 Elisha Dicken conceal carried as soon as he could 5:00 You don't need to be a LEO or Military to be tactically sound 9:12 Long shots are easy if...
Topics: Youtube, video, Education, how to stop a mass shooter, mass shooter, how to stop a mass shooting,...
Tubeup
Aug 10, 2022 Garand Thumb
movies

eye 0

favorite 0

comment 0

The 45-70 Modern Lever Action is an odd concept. The Thumper V2 is a concoction from Mad Pig Customs that attempts to bring these ancient but formidable 45-70 guns to the modern era. To they succeed? We hope to delve into that with this video. 00:00 Modern 45-70 Lever Action 1:45 Lever Action Rifle won the west 3:30 How powerful is 45-70? 5:44 Modern 45-70 Lever Action drills 10:36 Modern 45-70 Lever Action Rifle review The Thumper 12:12 Modern 45-70 Lever Action Muzzle 15:22 Modern 45-70 Lever...
Topics: Youtube, video, Education, 45-70, lever action, lever gun, henry x, wild west, ranger point...
Tubeup
Aug 10, 2022 Plastik Gatz
movies

eye 0

favorite 0

comment 0

Source: https://www.youtube.com/watch?v=oq2z-jdYupU Uploader: Plastik Gatz
Topics: Youtube, video, Film & Animation
Tubeup
Aug 10, 2022 Plastik Gatz
movies

eye 0

favorite 0

comment 0

This particular print is very special! Glock (the company) does not manufacture a pistol like this. This is a Glock 26 file that has been modified in CAD to have a Glock 19 grip. How cool is that? Here are links to all the people I've mentioned in the video, so go buy some stuff from those guys! https://linktr.ee/plastikgatz Source: https://www.youtube.com/watch?v=BeYCb2c9-_c Uploader: Plastik Gatz
Topics: Youtube, video, Entertainment, Glock 26X, Glock, 3D Printed, 3d printing, 3d printed glock, 3d...
Tubeup
Aug 10, 2022 Tacticool Girlfriend
movies

eye 0

favorite 0

comment 0

The modern carbine can be a very powerful, multi-purpose tool in the right hands. The technology and hardware around it has rapidly evolved throughout the years, and so has technique in perfecting the handling of this platform. In this video, I review the contemporary methodology of stance and operation of the carbine. Subscribe here and hit that notification bell: https://www.youtube.com/TacticoolGirlfriend?sub_confirmation=1 Support me on Patreon: https://patreon.com/tacticoolgf Facebook:...
Topics: Youtube, video, Education, shooting, firearm, firearms, gun, guns, tacticool, tactical, tacticool...
Tubeup
Aug 10, 2022 Tacticool Girlfriend
movies

eye 0

favorite 0

comment 0

First line gear is an essential first step in expanding your shooting capabilities. Since running the Ferro Concepts Bison battle belt for some time now, it has become a fundamental piece of my kit. In this video, I review the belt and give a general overview of my current first line gear setup. See my previous first line gear setup here: https://youtu.be/cq0BRSzd5XY Subscribe here and hit that notification bell: https://www.youtube.com/TacticoolGirlfriend?sub_confirmation=1 Support me on...
Topics: Youtube, video, Education, shooting, firearm, firearms, gun, guns, tacticool, tactical, tacticool...
Tubeup
Aug 10, 2022 Tacticool Girlfriend
movies

eye 0

favorite 0

comment 0

When it comes to landing shots, aiming is everything. Thus, optics are often the bleeding edge of your performance. There's a dizzying array of optics to choose from out there, no shortage of good ones even. It's all the more reason to carefully consider your shooting needs and how you wish to address them through your hardware, optics especially. Don't skimp on them. Eotech long ago made its name in the optic world and for good reason - they nearly own the holographic optic game with the likes...
Topics: Youtube, video, Education, shooting, firearm, firearms, gun, guns, tacticool, tactical, tacticool...
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Grab all of the exclusive designs by Kong Chho at our Patreon for just $1! https://www.patreon.com/3DPrintGeneral Grab them on Cults as well if you do not like Patreon: https://cults3d.com/en/users/3DPrintGeneral Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve. You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ Grab the 2019 Edition of my 3D Printing...
Topics: Youtube, video, Education, 3D Printing, 3D print, 3d printed, 3d design, patreon, 3d printer
Tubeup
Aug 10, 2022 School of the American Rifle
movies

eye 0

favorite 0

comment 0

This AR was donated for educational purposes only. Don't try this at home. Part 6 (Assembly Video) was recorded and uploaded to the School of the American Rifle Website. https://schooloftheamericanrifle.com We will not post AR Build/Assembly work will on YouTube due to YouTube Content Rules/Restrictions. The only way to see that content is to join our Community. Annual Subscription to the Community is $20.00 Source: https://www.youtube.com/watch?v=Zh39yqn0q8A Uploader: School of the American...
Topics: Youtube, video, Education
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

This video was sponsored by Skillshare The first 1000 people to use the link will get a free trial of Skillshare Premium Membership: https://skl.sh/the3dprintgeneral03211 In today's video, I take a detailed look at the MINGDA Rock 3 Pro, which has a large build volume and upgrades parts for a reasonable price. MINGDA Rock 3 Pro (affiliate): https://amzn.to/3r1byU2 MINGDA Website: http://www.3dmingda.com/ MINGDA has told me that they have taken my point about the extruder issues and are going to...
Topics: Youtube, video, Education, 3D Printing, 3D print
Tubeup
Aug 10, 2022 School of the American Rifle
movies

eye 0

favorite 0

comment 0

This AR was donated for educational purposes only. Don't try this at home. Part 6 (Assembly Video) was recorded and uploaded to the School of the American Rifle Website. https://schooloftheamericanrifle.com Part 7 will upload today if Chad does not die. We will not post AR Build/Assembly work will on YouTube due to YouTube Content Rules/Restrictions. The only way to see that content is to join our Community. Annual Subscription to the Community is $20.00 Source:...
Topics: Youtube, video, Education
Tubeup
Aug 10, 2022 School of the American Rifle
movies

eye 0

favorite 0

comment 0

It's a joke, don't take it so hard. Student couldn't make it and we can't shred it due to the wax seal. Source: https://www.youtube.com/watch?v=PtQNkGej9Y4 Uploader: School of the American Rifle
Topics: Youtube, video, Education
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video, I attempt to cover all of the support settings in Cura, and what my dialed in settings are. Please make sure to visit the sponsor of this video SD3D: http://bit.ly/2MLNOnq Our viewers get an exclusive 15% off their first order at SD3D! Just give them a call or contact them here and mention 3D Print General or use the promo code 3DPGENERAL at checkout: http://bit.ly/2MMY9zq Download Cura: http://bit.ly/2SaaHQw My Cura Settings: http://bit.ly/2kPX8dB Videos Mentioned How to Avoid...
Topics: Youtube, video, Education, 3D Printing, 3D print, 3d printed, cura, support, support settings, pla,...
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In today's video, we take a look at Polymakers latest contest! How strong can you design and 3D print a hook? Find out more info about entering: https://polymaker.com/3d-printed-hook-tournament/ Watch the Tournament Here: https://www.youtube.com/channel/UCO-Tq4vEhfNAKRi0cvLwxng Buy Polymax PLA (affiliate): Amazon: https://amzn.to/3mom7jf Matterhackers: https://bit.ly/32Z1bGk I have gotten over 10 entries and have only a couple of days left to print them, so I unfortunately cannot accept any new...
Topics: Youtube, video, Education, 3D Printing, 3D print, polymaker, strong, 3d printed
Tubeup
Aug 10, 2022 GUN ไทยแลนด์
movies

eye 0

favorite 0

comment 0

Source: https://www.youtube.com/watch?v=QXNFj5HeTLs Uploader: GUN ไทยแลนด์
Topics: Youtube, video, Music
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video, I figured out why my print quality started to decrease after swapping from a glass buildplate to a flexplate. It turns out PID autotuning your bed is pretty important. Make sure you visit the sponsor FÜM! http://breathefum.com/general Enter "General" at discount for 10% off! I really suggest checking out this sponsor, especially if you have been thinking about quitting nicotine or tobacco. Videos mentioned: CNC Kitchen PID vs Bang-Bang:...
Topics: Youtube, video, Education, 3D Printing, 3D print
Tubeup
Aug 10, 2022 Print Shoot Repeat
movies

eye 0

favorite 0

comment 0

Source: https://www.youtube.com/watch?v=vf5zwFPOOyk Uploader: Print Shoot Repeat
Topics: Youtube, video, Science & Technology
Twitch streams
Aug 10, 2022 Haelle
movies

eye 0

favorite 0

comment 0

Source: https://www.twitch.tv/videos/1557799056 Uploader: Haelle
Topics: TwitchVod, video
Tubeup
Aug 10, 2022 Print Shoot Repeat
movies

eye 0

favorite 0

comment 0

Today we look at a success story of sorts: A smart Texan turned in cheaply made printed guns and came away making $2800 in profit! My Printer: https://amzn.to/3uU0FHA Filament used for my 3D printed projects: https://bit.ly/3ufP1bz Link to all the gear I use: https://kit.co/PrintShootRepeat Patreon: https://www.patreon.com/printshootrepeat My favorite lube (10% off using link): https://slip2000.com/PSR My favorite red dot sight: https://amzn.to/3Gz6QoB PSR CLIPS: https://bit.ly/3o6AevJ PSR...
Topics: Youtube, video, Science & Technology
Tubeup
Aug 10, 2022 Print Shoot Repeat
movies

eye 0

favorite 0

comment 0

Get a Free MYSTERY ITEM Valued at $50 when you subscribe with code 'PRINTSHOOTREPEAT" at https://bit.ly/TPPSRJuly Today we react to an interesting video from a company called Dogoma, which aims to fight the proliferation of 3d printed weapons by slightly changing the geometry of the files. My Printer: https://amzn.to/3uU0FHA Filament used for my 3D printed projects: https://bit.ly/3ufP1bz Link to all the gear I use: https://kit.co/PrintShootRepeat Patreon:...
Topics: Youtube, video, Science & Technology
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video I upgrade my 5mm threaded rods for my Z axis to 8mm leadscrews. This is a great upgrade for anyone looking for more stability and higher quality prints. Parts (affiliate links - no extra charge to you): 8mm Threaded Rods: http://amzn.to/2rcYe5x 5mm to 8mm Couplings: http://amzn.to/2B6B8x0 Anti Backlash: http://amzn.to/2mEx9m3 White Lithium Grease: http://amzn.to/2Gj8Cfl Spare bolt screws and nuts: http://amzn.to/2DuYrWB RepRap Calculator: https://www.prusaprinters.org/calculator/...
Topics: Youtube, video, Education, 3d printing, leadscrews, lead screws, 8mm lead screws, threaded rods,...
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In today's video, I take a look at the Coreception 300 CoreXY printer by SainSmart. Buy now (Amazon has a $70 off coupon to make it $479) https://amzn.to/3mkilah (affiliate) More Info: https://bit.ly/2RqF06F SainSmart Filament - Get 15% off if you fill out this survey: https://airtable.com/shrUcEiifUq85gdDV PETG: https://bit.ly/2GTlBcw Time Stamps: Introduction - 00:00 Unboxing - 00:17 Initial Tests - 3:01 SainSmart PETG Tests - 6:25 Pros and Cons - 8:39 Final Thoughts - 10:37 Apologies again...
Topics: Youtube, video, Education, 3D Printing, 3D print
出演:ルーキー酒井    柳瀬さき    向山美喜(ピットリポーター) ※出演者スケジュールはこちらですhttps://www.boatrace-toda.jp/assets/img/wwl/wwlschedule_202207_08_02.png?ver=1 ※レース結果、払戻金につきましては主催者発表のものとご確認お願い致します。 ※生放送にはタイムラグが生じます。舟券購入の際はご注意ください...
Topics: Youtube, video, Sports
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

*** Contest is now over. Jeremy Tran was the winner! *** In this video I print, sand, paint, and am giving away this statue of Rick Sanchez from Rick and Morty. Link to Design: http://www.thingiverse.com/thing:2134321 Link to Garrett's video: https://www.youtube.com/watch?v=R97du7G9WG4 Like, subscribe, and comment below to enter! I will choose the winner on May 31st. Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the...
Topics: Youtube, video, Education, 3d print, 3d printed, rick sanchez, rick and morty, 3d printed rick, 3d...
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Today, we have a detailed review video of the EcubMaker TOYDIY 4-in-1 3D printer, laser engraver, and CNC carver. The list price is actually $500 on Amazon, not $600! Find out more: http://www.ecubmaker.com/ Buy Now (aff link): https://amzn.to/2UrOIbE NOTE: there is EcubMakerLaser software that is meant to be used with the laser engraving, though I wasn't aware it existed. Other items used (aff links) Capricorn Tubing: https://amzn.to/2OtGtrX PolyLite PLA: http://bit.ly/3247YMG PVA:...
Topics: Youtube, video, Education, 3D Printing, 3D print
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video, I take another look at my most popular video (and most critiqued) from two years ago on how to print with extremely fine nozzles. You can watch that old video here: https://www.youtube.com/watch?v=LHg9phNSCEY Parts Used (affiliate links): 0.15mm Nozzle: http://bit.ly/2HPuLBy 0.25mm Nozzle: http://bit.ly/2ycFXsr 0.4mm Nozzle: http://bit.ly/2sVY2pw All other E3D Parts: http://bit.ly/2JFaUen Bondtech BMG Dual Drive Extruder: http://bit.ly/2sBHYZV Amazon Basics PLA (which is out of...
Topics: Youtube, video, Education, 3D Printing, 3D print, 3d printed, fine, detail, tolerance, high...
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In our latest video, Kong designs and I print Doug Dimmadome from Fairly Odd Parents. How tall can you make your hat? Download Here: Cults: https://cults3d.com/en/3d-model/art/doug-dimmadome-fairly-odd-parents My Mini Factory: https://www.myminifactory.com/object/3d-print-113462 Thingiverse: https://www.thingiverse.com/thing:4201404 Background Music by Joakim Karud http://soundcloud.com/joakimkarud Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/...
Topics: Youtube, video, Education, 3D Printing, 3D print
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video I take a look at the Sovol SV04 printer that has independently moving extruders and hotends. More info: https://sovol3d.com/products/sv04 Amazon ($530 after discount. Affiliate): https://amzn.to/3GiSE4C Products used (affiliates) Polylite PLA: https://bit.ly/3tQETFs Polylite PETG: https://bit.ly/3s6tlgf PolySupport: https://bit.ly/3LET336 Polymax PLA: https://bit.ly/3gGJVx7 PolyDissolve S1: https://bit.ly/3MHscDy Files Used: Spring: https://www.thingiverse.com/thing:487880...
Topics: Youtube, video, Education, 3D Printing, 3D print
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Need a costume last minute for #Halloween and have a 3D printer? I got you covered. South Park Eyes: https://www.myminifactory.com/object/comedy-central-south-park-glasses-7391 Price is Right Blank: https://www.sd3d.com/wp-content/uploads/2016/10/scaledpriceisright.stl Star Trek Pin: https://www.myminifactory.com/object/star-trek-pin-5758 Ninja Star: https://www.thingiverse.com/thing:1814181 Eyeglasses Nose and Mustache: https://www.thingiverse.com/thing:1081252 Enter to win Krombopulous...
Topics: Youtube, video, Howto & Style, halloween, costume, last minute, diy, 3d printing, 3d printed...
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Watch the full interview that this clip was taken from here: https://www.youtube.com/watch?v=XT31PeE0HJg Follow Suckboy Tony Twitter: https://twitter.com/SuckBoyTony1 Instagram: https://www.instagram.com/suckboytony2/ YouTube: https://www.youtube.com/channel/UC0_zju_nTqZliLyuuoUifSQ My go-to PLA is Polymaker PolyLite PLA. Not a paid sponsor - I just love using it! https://amzn.to/348020l Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products...
Topics: Youtube, video, Education, 3D Printing, 3D print
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

A look at some of the optical illusions available for 3D printing (and maybe a couple of free energy perpetual motion machines). 3D Files: Anamorphic Cube: https://www.thingiverse.com/thing:1889022 Rightward Pointing Arrow: https://www.thingiverse.com/thing:2887058 Head in a Block: https://www.thingiverse.com/thing:2569573 Ambiguous Cylinder: https://www.myminifactory.com/object/3d-print-ambiguous-cylinder-illusion-26981 Straight Pole Curved Hole:...
Topics: Youtube, video, Entertainment, optical illusion, 3d printed optical illusion, illusion, 3d printed...
Tubeup
Aug 10, 2022 Print Shoot Repeat
movies

eye 0

favorite 0

comment 0

Think about what you say online guys, the reporter was just doing their job. Please don’t harass them. If you are unhappy about the piece, leave a comment on Sky New’s YouTube: Original video link: https://www.youtube.com/watch?v=qSPV_CGJ9bA My Printer: https://amzn.to/3uU0FHA Link to all the gear I use: https://kit.co/PrintShootRepeat Filament used for my 3D printed projects: https://bit.ly/3ufP1bz Patreon: https://www.patreon.com/printshootrepeat My favorite lube (10% off using link):...
Topics: Youtube, video, Science & Technology
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video, I take a look at the Palette 2S Pro, which allows for the use of up to 4 different materials in a single extruder printer. This is part 1 of 3 reviewing this machine. Learn More: http://bit.ly/37DlKKd Watch Part 2/3: https://www.youtube.com/watch?v=64auPNfG4HY Part 3/3: https://www.youtube.com/watch?v=Gxg2TfjH_ag Buy (affiliate links) Palette 2S Pro: http://bit.ly/2XTnjz3 Palette 2S: http://bit.ly/2OOnCXT Upgrade kit for Palette 2S: http://bit.ly/2KXK3sE Upgrade kit for Palette...
Topics: Youtube, video, Education, 3D Printing, 3D print, 3d printer, mosaic, palette, palette 2s, palette...
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Full detailed video here: https://www.youtube.com/watch?v=7TsJOvxQk-c Source: https://www.youtube.com/watch?v=t9rHhM-orrg Uploader: The 3D Print General
Topics: Youtube, video, Education
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video I take a step back and take a look at some of the 3D printing advancements that have occurred over the past 2 years. Videos Mentioned: My review of CR-30: 3D Printing Nerd Wall Mounting Belt Printer: https://www.youtube.com/watch?v=LClMyYvypnw 3D Que YouTube: https://www.youtube.com/c/3DQue Quinly Vision: https://www.youtube.com/watch?v=kJgauRGMXyQ E3D Tool Changer Video: https://www.youtube.com/watch?v=C7wYfaHT1g0 Thomas Sanladerer Voron:...
Topics: Youtube, video, Education, 3D Printing, 3D print
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

I will be testing this bad boy soon! Design by DigitalNimbusLabs Source: https://www.youtube.com/watch?v=J64Li9kAvMw Uploader: The 3D Print General
Topics: Youtube, video, Education
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

My entry for the 2018 Anet Global 3D Printing Competition - this massive Hulk vs Hulk Buster designed by Sanix over at Malix3Design. Make sure to like and interact to help me win this contest! Link to Design Files: http://bit.ly/2JjX6BI Full Avengers Diorama Video: https://www.youtube.com/watch?v=F0SqfFtljNg Anet Competition Facebook Page: https://www.facebook.com/groups/anet3dprintingcompetition Parts Used (Affiliate links - no extra charge to you) AIO Robotics PLA: https://amzn.to/2uiYy13...
Topics: Youtube, video, Education, hulk, hulkbuster, iron man, 3d printed hulk, 3d printed hulkbuster, age...
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Just a quick video tutorial on how to fix the issue of your 3D printer's build plate not heating. Products used (some are affiliate links - no extra charge to you) Multimeter: https://amzn.to/2CoW5Yt Solder Seal Connectors: https://amzn.to/2R1txbC Upgraded Terminal Block: http://bit.ly/2yk7Psk 40 x 40 x 10 12v fans: https://amzn.to/2Etf5HK Generic RAMPS 1.4 board: https://amzn.to/2yLYY1Y Background Music: Good For You by THBD https://soundcloud.com/thbdsultan Creative Commons — Attribution...
Topics: Youtube, video, Education, 3dprinter, 3d printer, build plate, 3d printer tutorial, how to, fix 3d...
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

This is part 2 of an ongoing series for those brand new to 3D printing. Here we will be exploring one of the most important parts on a 3D printer - the extruder. Extruders mentioned: Standard non-geared: https://amzn.to/2C5JtnO Titan geared: http://bit.ly/2PF9VNc Bondtech Dual Drive: http://bit.ly/2FEZuAa Follow E3D for Hermes updates: https://twitter.com/E3DOnline E-Steps Videos: Old Thomas Sanladerer video that originally taught me: https://www.youtube.com/watch?v=YUPfBJz3I6Y Matterhackers on...
Topics: Youtube, video, Education, 3D Printing, 3D print, 3d printer, beginner, 3d printing for beginners,...
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In today's video we print and paint the awesome design by Fotis Mint of Gandalf vs Balrog diorama. Install Raid for Free ✅ IOS: https://clik.cc/5o6kB ✅ ANDROID: https://clik.cc/88zDU ✅ PC: https://clik.cc/dYywE and get a special starter pack 💥Available only for the next 30 days! Follow Fotis Mint: https://www.patreon.com/FotisMint Parts Used (affiliates) Brown Resin 1000g: https://amzn.to/2ZAQmYY Green Elegoo Resin: https://amzn.to/3rgyvTF Elegoo Saturn: https://amzn.to/31d78PK...
Topics: Youtube, video, Education, 3D Printing, 3D print, lotr, lord of the rings
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video, I take a closer look at the Palette 2S Pro by Mosaic in order to help you get consistently clean prints. Unfortunately, I was unable to hone in dissolvable support interface, but that will be sure to be included into part 3. Learn More: http://bit.ly/37DlKKd Part 1/3: https://www.youtube.com/watch?v=-6E_L3j4JTA Part 3/3: https://www.youtube.com/watch?v=Gxg2TfjH_ag Buy (affiliate links) Palette 2S Pro: http://bit.ly/2XTnjz3 Palette 2S: http://bit.ly/2OOnCXT Upgrade kit for Palette...
Topics: Youtube, video, Education, 3D Printing, 3D print, 3d printer, 3d printed, palette, mosaic, mosaic...
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In today's video, I take a look at the original Ender 5 by Creality with an unboxing and test prints. Creality Site: https://bit.ly/2GgYokP Buy Now (affiliate links) Creality Website for Under $300: https://bit.ly/2Xc8c7C Amazon: https://amzn.to/3oTBIsc Ender 5 Pro Creality Website: https://bit.ly/3mLsYCo Amazon: https://amzn.to/3jVTvLD Ender 5 Plus Creality Website: https://bit.ly/2HTq53X Amazon: https://amzn.to/35ZoTnF Videos Mentioned Coreception Review:...
Topics: Youtube, video, Education, 3D Printing, 3D print
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Source: https://www.youtube.com/watch?v=5hJUbIuw7yU Uploader: The 3D Print General
Topics: Youtube, video, Education
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Scan the World! In this video I print and paint a 19 inch tall, life-sized Nefertiti bust. This is just one of hundreds of models available of historical artifacts done by MyMiniFactory with their Scan the World project. Support Scan the World: https://bit.ly/3BD05AS Download Historical Models: https://bit.ly/3wU8JY8 Polyterra PLA (affiliate): https://amzn.to/3wVIkcg Polyterra PLA more info: https://bit.ly/2UrNVtX Other parts used (affiliate) Airbrush Kit Used: https://amzn.to/2QTOZmA Airbrush...
Topics: Youtube, video, Education, 3D Printing, 3D print, nefertiti, scan the world, myminifactory, 3d...
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Today is part 1 of a 2 part series taking a deep dive look into Cura and what each slicer setting does. Check out the Best Damn Tea on Earth - Zest Tea Enter "3DPRINT" at checkout for free shipping Website: https://bit.ly/3keepqo Amazon Cold Tea: https://amzn.to/3jm9Bhu Amazon Tea Bags: https://amzn.to/3jfAseX Amazon Loose Leaf: https://amzn.to/31p1muB Watch Part 2: https://www.youtube.com/watch?v=GNoKh3ylS48 Videos and Websites Mentioned: Download Cura: http://bit.ly/2SaaHQw G-Code...
Topics: Youtube, video, Education, 3D Printing, 3D print
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In today's video, I take a look at the ANET ET5. This printer is similar to that of the CR-10 variety machines with a few things to set it apart. Buy now: https://shop.anet3d.com/products/anet-et5-large-3d-printer Time Stamps: Intro - 00:00 Unboxing and specs - 00:16 Initial test prints and issues - 1:03 Further tests - 1:55 Pros and Cons - 4:40 Final Thoughts - 6:51 Parts used (affiliate links) Polymaker Polylite PLA: http://bit.ly/3247YMG Background music by Joakim Karud:...
Topics: Youtube, video, Education, 3D Printing, 3D print
Tubeup
Aug 10, 2022 Print Shoot Repeat
movies

eye 0

favorite 0

comment 0

Today we review and compare the Pakistani Ordnance Factory (POF) MP5 and why I think it's the best HK alternative. Additionally we look at some of the features of our 3D printed MP5 (KF5) and how it compares to the POF MP5 out of the box. Lastly we upgrade the POF to compete with the 3D printed version! Enjoy! My Printer: https://amzn.to/3uU0FHA Filament used for my 3D printed projects: https://bit.ly/3ufP1bz Link to all the gear I use: https://kit.co/PrintShootRepeat Patreon:...
Topics: Youtube, video, Science & Technology
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In today's video, I am printing, painting, and giving away Joker busts designed by Fotis Mint. To enter to win, you just need to be subscribed and leave any comment down below. Please make sure to visit the sponsor of this video SD3D: http://bit.ly/2MLNOnq Our viewers get an exclusive 15% off their first order at SD3D! Just give them a call or contact them here and mention 3D Print General or use the promo code 3DPGENERAL at checkout: http://bit.ly/2MMY9zq Files Used: Arthur Fleck:...
Topics: Youtube, video, Education, 3D Printing, 3D print, 3d printed, free, giveaway, joker, arthur fleck,...
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Contest is now over! Winner was Roman Soldier! Today I am printing, assembling, painting, and giving away Mjolnir - Thor's Hammer! Design by Reg Taylor on My Mini Factory: https://www.myminifactory.com/object/thors-hammer-mjlnir-3061 Winner of the Han Solo Blaster: Jaiman Bhardwaj To win the hammer, subscribe to the channel, like the video, and leave any comment. Hero Down by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)...
Topics: Youtube, video, Entertainment, 3d print, 3d printed, 3d printing, 3d printer, mjolnir, thor, thor's...
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Based on the Jacob's & Co Astronomia #watch Source: https://www.youtube.com/watch?v=3ZA0mgyuOco Uploader: The 3D Print General
Topics: Youtube, video, Education
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video, I take a look at the Volcano and Super Volcano by E3D. The SuperVolcano allows for up to 11x the volumetric throughput of their V6. Volcano: http://bit.ly/2KNocDd SuperVolcano: http://bit.ly/2TBh6FJ Other Parts Used (affiliate link) Bondtech BMG: http://bit.ly/2FEZuAa Print Speed Calculator: http://bit.ly/2Z7D3gV Super Volcano Assembly: http://bit.ly/2YVOrkY How Fast Can You 3D Print video: https://www.youtube.com/watch?v=V5g32AtYczE Transparent 3D Prints video:...
Topics: Youtube, video, Education, 3D Printing, 3D print, e3d, volcano, super volcano, 3d printed, 3d...
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video, I review the $229 SparkMaker Original SLA 3D printer. Purchase parts used (affiliate links) SparkMaker Original SLA: https://amzn.to/2XAuk7W SparkMaker Grey Resin: https://amzn.to/2qrSRjh SparkMaker White Resin: https://amzn.to/2NZ7weP Longer Brown Resin used in video: https://amzn.to/2rU99Sk Read more on the SparkMaker Original: https://www.sparkmaker3d.com/sparkmaker-original Videos worth watching Support Settings for Chitubox from 3DPrintingPro:...
Topics: Youtube, video, Education, 3D Printing, 3D print, sparkmaker, sla, cheap sla, sla review,...
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video I attempt to dial in tree supports. Please leave any comments if you have working tree supports and have tips for others. Happy FlexiSpot Day! Up to $200 OFF during 25th-31st May 2022! Once a year only! https://bit.ly/3FBLuId FlexiSpot Pro Standing Desk (E3/E5) https://bit.ly/3DrJNMx FlexiSpot Soutien Ergonomic Office Chair https://bit.ly/3Jy27Gp #flexiblewfh #MyFlexiDesk #flexispot Videos Mentioned: Detailed Cura Support Settings: https://www.youtube.com/watch?v=7TsJOvxQk-c How...
Topics: Youtube, video, Education, 3D Printing, 3D print
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Here is part 2 of my review of the XYZ da Vinci Jr 1.0A Pro where I go over some things I missed in part 1, and test out the laser engraver module. Buy Now: http://bit.ly/2MuDqjU Add laser engraving or hardened steel options: http://bit.ly/2ZiNiDe More info on printer: http://bit.ly/2XKdwKt Part 1 of my review: https://www.youtube.com/watch?v=Wf9fUzdhHm4 #3dprinting #3dprinter #XYZ Background Music by Joakim Karud http://soundcloud.com/joakimkarud Follow now for more free giveaways and 3D...
Topics: Youtube, video, Education, 3D Printing, 3D print, 3d printer, xyz, xyz printing, xyz 3d printer, da...
Twitch streams
Aug 10, 2022 Haelle
movies

eye 0

favorite 0

comment 0

Source: https://www.twitch.tv/videos/1556869526 Uploader: Haelle
Topics: TwitchVod, video
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

**Contest is now over - Lebron Gains is the winner** In this video I 3D print, and giveaway, two busts of Conor McGregor! Kong Chho (designer) Instagram: @captkiro or https://goo.gl/EmjBFR Get a design done by Kong: https://goo.gl/49u3Tm To enter the contest, make sure you are subscribed to this channel, that you liked this video, and that you leave any comment below. Download the 3D files of this bust, and help out this channel, by visiting my newly created Patreon:...
Topics: Youtube, video, Entertainment, 3D printed, 3d printing, conor mcgregor, mcgregor, 3d printed conor...
Mirrortube: Mirrored YouTube Videos
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In today's video, we take a peak at making 3D printed colored lithophanes! Lithophane Instructions: https://bit.ly/3eORtuT Lithophane Tool: https://bit.ly/2Vw1XYy Sketchfab: https://bit.ly/2YJxfgB Kong's Sketchfab: https://bit.ly/2YKkbri My Lithophane Lamp Video: https://www.youtube.com/watch?v=KpPX7w4CJ8U Background music by Joakim Karud http://soundcloud.com/joakimkarud Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in...
Topics: Youtube, video, Education, 3D Printing, 3D print, lithophane, lithophanes, color, colored, color...
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Do you have so many fidget spinners that you aren’t sure what to do with all of them? Are you tired of only being able to spin one at a time? Well the Fidget Spinner Fidget Spinner is just for you! Fidget Spinner Fidget Spinner: https://www.thingiverse.com/thing:2343166 Tri Fidget Spinner Toy: https://www.thingiverse.com/thing:1802260 Beachfront Celebration - Latinesque by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)...
Topics: Youtube, video, Entertainment, fidget spinner, fidget, spinner, fidget spinner fidget spinner, 3d...
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

The folks over at FlashForge USA sent me over their Adventurer 3 for review. Check it out! Adventurer 3: http://bit.ly/2MrkeR3 FlashForge USA: http://bit.ly/2CGmorH Come back soon for upgrades and other printing options for this machine. Music Credits: Joakim Karud http://soundcloud.com/joakimkarud learsky.empee3 by jimmysquare https://soundcloud.com/jimmysquare Pillowtalk by Jeff Kaale: https://soundcloud.com/jeff-kaale #FlashForge #Adventurer3 #3DPrinting Follow now for more free giveaways...
Topics: Youtube, video, Education, flashforge, adventurer 3, adventurer3, 3d printer, review, 3d printing,...
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video I take a look at the FLSUN SR - Super Racer. This large delta printer has a sturdy, well built frame and boasts a fast top printing speed. Buy Now: https://bit.ly/3hFXtul **NOTE** The print pausing now has a firmware upgrade which asks if you would like to use the resume printing feature. You would select "No". This hasn't entirely fixed the issue but now no longer requires start g.code tweaks. Other delta FLSUN reviews I've done: FLSUN QQS:...
Topics: Youtube, video, Education, 3D Printing, 3D print
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

Check out this video's sponsor! https://jlcpcb.com/ $2 2Layer 5PCBs, $5 4 Layer 5PCBs Enter their "Wanna See You 2020" Giveaway: https://bit.ly/38vGVjZ In today's video, I take a look at the phenomenal design by mcmaven of the triaxial tourbillon clock, based on the Astronomia watch by Jacob & Co. Files: Clock I printed: https://www.thingiverse.com/thing:3415296 With Quartz Movement: https://www.thingiverse.com/thing:3677946 With Motorized Movement:...
Topics: Youtube, video, Education, 3D Printing, 3D print, astronomia, triaxial, jacob & co
Tubeup
Aug 10, 2022 Print Shoot Repeat
movies

eye 0

favorite 0

comment 0

My Printer: https://amzn.to/3uU0FHA Filament used for my 3D printed projects: https://bit.ly/3ufP1bz 00:00 Intro 02:00 New Merch Items 05:45 What Printer To Start With? 08:20 What Filament? 09:50 Other Questions 11:19 PSR-15 Info 13:02 KAK Shoutout 13:23 UBAR with PSR-15 Upper Setup 15:32 Test Firing 19:13 Outro/Credits Link to all the gear I use: https://kit.co/PrintShootRepeat Patreon: https://www.patreon.com/printshootrepeat My favorite lube (10% off using link): https://slip2000.com/PSR My...
Topics: Youtube, video, Science & Technology
Tubeup
Aug 10, 2022 The 3D Print General
movies

eye 0

favorite 0

comment 0

In this video, I print and paint a Halloween Deadpool bust designed by Sanix at Malix 3Design. Download for yourself: http://bit.ly/319gsl7 Check out all of his designs: http://bit.ly/323PQmR Arthur Fleck and Joker bust giveaway: https://www.youtube.com/watch?v=44vm9IeeZj8 Video going over using support to anchor: https://www.youtube.com/watch?v=lRLW2xIuBQU Parts Used (Affiliate Links) Overture PLA: https://amzn.to/2YKJdnS HDPLA: http://bit.ly/2oIScZP Primer: https://amzn.to/2LFI5dZ Acrylic...
Topics: Youtube, video, Education, 3D Printing, 3D print, 3d printed, deadpool, halloween, sanix, malix,...