Notes

Disk info for 099b_S-C_MicroCompiler_1.0.dsk:

File Name: 3d0g_099b_S-C_MicroCompiler_1.0/099b_S-C_MicroCompiler_1.0.dsk
Disk Name: DISK VOLUME #254
Physical Size (bytes): 143360
Free Space (bytes): 35072
Used Space (bytes): 108288
Physical Size (KB): 140
Free Space (KB): 34
Used Space (KB): 105
Archive Order: DOS
Disk Format: DOS 3.3
Total Sectors: 560
Free Sectors: 137
Used Sectors: 423
Tracks On Disk: 35
Sectors On Disk: 16

Disk directory for 099b_S-C_MicroCompiler_1.0.dsk:

3d0g_099b_S-C_MicroCompiler_1.0/099b_S-C_MicroCompiler_1.0.dsk DISK VOLUME #254
* A 004 HELLO
* B 035 S-C.ASM.MACRO
* B 037 S-C.ASM.MACRO.LC
* T 002 LOAD LCASM
I 004 APPLESOFT
* I 018 CATALOG PRINT ROUTINE
* I 012 GENERAL ML LOADER
* I 014 SAMPLE PRINTER DRIVER
* I 007 SEARCH BINARY STRING
* I 029 SWEET-16
* I 014 MACRO LIBRARY
I 002 LCASM
* I 022 SUPROD
* B 022 SWEET 16.S
* B 026 FIG-FORTH
* A 004 EDIT.LOAD
* A 002 EDITOR
* B 028 BIG APPEND
* A 070 DOCUMENTATION
* B 028 EDIT.PROD
B 004 SUPROD.OBJ
DOS 3.3 format; 35,072 bytes free; 108,288 bytes used.

Text found in 099b_S-C_MicroCompiler_1.0.dsk/APPLESOFT.int:

10 TEXT :CALL -936:PRINT "S-C MACRO ASSEMBLER VERSION 1.0"
15 POKE -21918,0: POKE -21935,0
20 PRINT "---------------------------------------":PRINT "COPYRIGHT (C) 1982"
25 PRINT "---------------------------------------":PRINT "S-C SOFTWARE CORPORATION"
30 PRINT "P. O. BOX 280300":PRINT "DALLAS, TX 75228 (214) 324-2050"
40 VTAB 11:TAB 5:PRINT "1 -- LOAD S-C MACRO ASSEMBLER":PRINT
50 TAB 5:PRINT "2 -- ENTER INTEGER BASIC":GOSUB 100
60 VTAB 15:TAB 5:PRINT "WHICH? ";:INPUT A$:IF A$#"1" AND A$#"2" THEN 40
70 PRINT :IF A$="1" THEN 200
80 CALL -936:PRINT "CATALOG":PRINT "INT"
100 VTAB 20:PRINT "(NOTE: TYPE 'I' FILES ON THIS DISK ARE"
110 POKE 50,63:REM INVERSE
120 PRINT "NOT";: POKE 50,255:PRINT " INTEGER BASIC PROGRAMS; THEY ARE"
130 PRINT "ALL ASSEMBLY LANGUAGE SOURCE PROGRAMS.)":RETURN
200 PRINT "BLOAD S-C.ASM.MACRO":CALL 4096

Text found in 099b_S-C_MicroCompiler_1.0.dsk/CATALOG PRINT ROUTINE.int:

Listing error: possible embedded machine code.

Text found in 099b_S-C_MicroCompiler_1.0.dsk/DOCUMENTATION.bas:

10 HOME
20 VTAB (8)
30 PRINT TAB( 13);"C. R. A. E. 1"
40 PRINT : PRINT
50 PRINT "COPYRIGHTED 1980"
60 PRINT "HIGHLANDS COMPUTER SERVICES"
70 PRINT : PRINT
80 VTAB (22): PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END": GET A$: HOME : IF A$ = CHR$(13) THEN END : HOME
90 PRINT "THIS IS A CO-RESIDENT APPLESOFT EDITOR"
100 PRINT " ^ ^ ^ ^"
110 PRINT "ROUTINE FOR APPLESOFT PROGRAMS"
120 PRINT "THIS VERSION MUST RUN AT $$7BF0 -$9600"
130 PRINT "WHEN YOU RUN 'EDIT.LOAD'
140 PRINT " IT RESETS HIMEM TO $7BF0"
150 PRINT "AND $03F5 TO 4C 00 8D"
160 PRINT "AND LOADS C.R.A.E. INTO MEMORY"
170 PRINT "C.R.A.E REQUIRES 48K,DOS 3.2, AND"
180 PRINT "APPLESOFT ON ROM"
190 PRINT
200 PRINT "TO USE C.R.A.E. YOU USE THE AMPERSAND"
210 PRINT "COMMAND. WHEN IN EDIT MODE THE"
220 PRINT "WORD 'READY' APPEARS AND A [ NEXT"
230 PRINT "TO THE CURSOR."
240 PRINT "C.R.A.E. IS NOW WAITING FOR YOU TO "
250 PRINT "ENTER YOUR COMMAND. C FOR CHANGE"
260 PRINT "OR F FOR FIND ETC. THE FORMATS ARE"
270 PRINT "DESCRIBED BELOW."
280 PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
290 GET A$: HOME : IF A$ = CHR$(13) THEN END
300 PRINT "DO NOT RESET MAXFILES AS THIS COULD"
310 PRINT "CAUSE DOS 3.2 TO WRITE OVER C.R.A.E."
320 PRINT "C.R.A.E. ASSUMES THAT MAXFILES ARE"
330 PRINT "SET TO THE DEFAULT VALUE "
340 PRINT "IF ENTERING A C.R.A.E. COMMAND OR"
350 PRINT "ENTERING AN ILLEGAL VALUE IN A PARAMETER"
360 PRINT "CAUSES ANY APPLESOFT ERROR MESSAGES"
370 PRINT "YOU MAY END UP BACK IN APPLESOFT."
380 PRINT "TO GET BACK TO C.R.A.E. ENTER A '&'."
390 GET A$: HOME : IF A$ = CHR$(13) THEN END
400 HOME
410 PRINT "[ F/STRING/START,END"
420 PRINT
430 PRINT "F = FIND"
440 PRINT "STRING = STRING TO SEARCH FOR"
450 PRINT "THE 'STRING' MUST HAVE A DELIMITER"
460 PRINT "BEFORE AMD AFTER IT AND THEY "
470 PRINT "MUST BE THE SAME"
480 PRINT "ANY CHARACTER MAY BE USED AS"
490 PRINT "A DELIMETER EXCEPT FOR"
500 PRINT "A 'P' ESC CODE,CTL CODE,BLANK OR ANY"
510 PRINT "COMBINATION THAT DOS MIGHT INTERCEPT"
520 PRINT "IN THE EXAMPLES A '/' IS USUALLY USED"
530 PRINT "START = STARTING LINE NUMBER"
540 PRINT "TO BEGIN THE STRING SEARCH."
550 PRINT "END = ENDING LINE NUMBER TO"
560 PRINT "SEARCH TO."
570 PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
580 GET A$: HOME : IF A$ = CHR$(13) THEN END
590 HOME
600 PRINT "F/JOE/": PRINT
610 PRINT "THIS WILL SCAN THE ENTIRE APPLESOFT"
620 PRINT "PROGRAM FOR ANY OCCURENCE OF"
630 PRINT "THE STRING 'JOE'"
640 PRINT : PRINT "F/JOE/300,700": PRINT
650 PRINT "THIS WILL SCAN LINES 300 TO 700"
660 PRINT "FOR 'JOE'"
670 PRINT : PRINT "F/JOE/500": PRINT
680 PRINT "THIS WILL SCAN THE PROGRAM"
690 PRINT "FROM LINE 500 TO THE END FOR"
700 PRINT "'JOE'"
710 PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
720 GET A$: HOME : IF A$ = CHR$(13) THEN END
730 HOME
740 PRINT "F/JOE/,500": PRINT
750 PRINT "THIS WILL NOT WORK AND WILL CAUSE"
760 PRINT "A SYNTAX ERROR BECAUSE NO 'START' LINE"
770 PRINT "NUMBER WAS SPECIFIED": PRINT
780 PRINT "AS EACH LINE IS SCANNED "
790 PRINT "IF THE SPECIFIED STRING IS FOUND"
800 PRINT "THE LINE WILL BE DISPLAYED ON"
810 PRINT "THE SCREEN. TO STOP THE SEARCH"
820 PRINT "YOU MAY PRESS ANY KEY AND TO "
830 PRINT "RESUME THE SEARCH "
840 PRINT "PRESS ANY KEY AGAIN, IF YOU"
850 PRINT "DO NOT WANT THE SEARCH TO"
860 PRINT "CONTINUE PRESS C/R AND YOU"
870 PRINT "WILL SEE 'READY' AND C.R.A.E."
880 PRINT "WILL BE WAITING FOR A COMMAND"
890 PRINT
900 PRINT "F/ /"
910 PRINT
920 PRINT "THIS WILL LIST THE ENTIRE PROGRAM"
930 PRINT : PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
940 GET A$: HOME : IF A$ = CHR$(13) THEN END
950 HOME
960 PRINT "WHEN THE SEARCH IS DONE "
970 PRINT "THE WORD 'READY' WILL APPEAR"
980 PRINT "AND THE '[' PROMPT"
990 PRINT "C.R.A.E. IS NOW WAITING FOR THE"
1000 PRINT "NEXT COMMAND. IF YOU WANT"
1010 PRINT "TO GET BACK TO APPLESOFT"
1020 PRINT "ENTER A C/R."
1030 PRINT
1040 PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
1050 GET A$: HOME : IF A$ = CHR$(13) THEN END
1060 HOME
1070 PRINT "C/STRING1/STRING2/START,END"
1080 PRINT
1090 PRINT "C = CHANGE"
1100 PRINT
1110 PRINT "STRING1 = THE STRING THAT"
1120 PRINT "IS TO BE CHANGED"
1130 PRINT
1140 PRINT "STRING2 = THE STRING THAT"
1150 PRINT "IS TO REPLACE STRING ONE"
1160 PRINT
1170 PRINT "START = STARTING LINE NUMBER"
1180 PRINT "TO BEGIN LOOKING FOR STRING ONE"
1190 PRINT
1200 PRINT "END = ENDING LINE NUMBER OF"
1210 PRINT "RANGE TO BE SEARCHED"
1220 PRINT
1230 PRINT " DEFAULT = ALL"
1240 PRINT
1250 PRINT "STRING1 AND STRING2 MUST"
1260 PRINT "HAVE THE SAME DELIMITER "
1270 PRINT "BEFORE AND AFTER THEM."
1280 PRINT : PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
1290 GET A$: HOME : IF A$ = CHR$(13) THEN END
1300 HOME
1310 PRINT "'CHANGE' WILL CHANGE THE FIRST "
1320 PRINT "OCCURENCE OF STRING1 IN A LINE "
1330 PRINT "FOUND.IF YOU WISH TO CHANGE MORE"
1340 PRINT "THAN ONE OCCURENCE OF A GIVEN "
1350 PRINT "STRING IN ONE LINE THEN YOU MUST"
1360 PRINT "RUN 'C' AGAIN."
1370 PRINT : PRINT "C/JOE/HI FRED/": PRINT
1380 PRINT "THIS WILL CHANGE JOE TO HI FRED IN"
1390 PRINT "EVERY LINE THAT JOE IS IN."
1400 PRINT : PRINT "C/PRINT/GOSUB/100,500": PRINT
1410 PRINT "THIS WILL CHANGE STR1 TO STR2"
1420 PRINT "IN LINES 100 TO 500"
1430 PRINT : PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END": GET A$: HOME : IF A$ = CHR$(13) THEN END : HOME
1440 PRINT "C/JOE/ /": PRINT
1450 PRINT "THIS WILL CHANGE 'JOE' TO THREE"
1460 PRINT "BLANKS."
1470 PRINT "BEFORE: 10 PRINT 'HI JOE'"
1480 PRINT "AFTER: 10 PRINT 'HI '"
1490 PRINT : PRINT "C/JOE//": PRINT
1500 PRINT "THIS WILL REMOVE 'JOE'"
1510 PRINT : PRINT "BEFORE 10 PRINT 'HI JOE'"
1520 PRINT "AFTER 10 PRINT 'HI '"
1530 PRINT : PRINT "C/JOE/HI JOE/100": PRINT
1540 PRINT "THIS WILL CHANGE STR1 TO STR2"
1550 PRINT "STARTING AT LINE 100 TO THE"
1560 PRINT "END OF THE PROGRAM."
1570 PRINT "C/JOE/VAL/,500"
1580 PRINT "THIS IS ILLEGAL WITHOUT A 'START' LINE #"
1590 PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END": GET A$: HOME : IF A$ = CHR$(13) THEN END : HOME
1600 PRINT "'CHANGE DOES NOT SCAN THE LINE"
1610 PRINT "NUMBERS. IF THE 'CHANGE' CAUSES"
1620 PRINT "THE LENGTH OF THE LINE TO BE"
1630 PRINT "GREATER THAN 253 CHARACTERS THE"
1640 PRINT "SCAN WILL STOP AND 'ERR> WARNING <<-----"
3230 PRINT : PRINT "IF YOU SPECIFY A 'TO' RANGE"
3240 PRINT "THAT FALLS WITHIN THE 'FROM' RANGE"
3250 PRINT "YOU WILL GET ERR OPERATING NOTES <--"
4060 PRINT
4070 PRINT "C.R.A.E. ASSUMES THAT YOUR PROGRAM"
4080 PRINT "HAS ASCENDING SEQUENTIAL LINE NUMBERS"
4090 PRINT "IF THRU THE USE OF APPEND OR BY OTHER"
4100 PRINT "MEANS (POKE ETC) YOU HAVE NON-"
4110 PRINT "SEQUENTIAL LINE NUMBERS THEN THE"
4120 PRINT "RESULTS OF C.R.A.E. COMMANDS CAN NOT BE"
4130 PRINT "PREDICTED."
4140 PRINT "C.R.A.E. COMMANDS ALLOW FOR LINES"
4150 PRINT "TO BE LONGER THAN 240 BYTES"
4160 PRINT "YOU MAY CREATE LINES UP TO 255 BYTES"
4170 PRINT "BUT YOU WILL NOT BE ABLE TO USE"
4180 PRINT "THE COMMANDS ON LINES THAT ARE"
4190 PRINT "LONGER THAN 253 BYTES LONG."
4200 PRINT "IF THIS SEEMS CONFUSING JUST GO BY"
4210 PRINT "APPLESOFT RULES OF 240 BYTES AND"
4220 PRINT "YOU WILL HAVE NO PROBLEMS"
4230 PRINT : PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
4240 GET A$
4250 IF A$ = CHR$(13) THEN END
4260 HOME : RETURN
4270 HOME
4280 PRINT "N START,INCR": PRINT
4290 PRINT "THE 'N' COMMAND IS FOR "
4300 PRINT "AUTOMATIC LINE NUMBERING."
4310 PRINT : PRINT "START=STARTING LINE NUMBER"
4320 PRINT
4330 PRINT : PRINT "INCR=AMOUNT TO INCREMENT EACH NEW LINE"
4340 PRINT
4350 PRINT "N100,5": PRINT
4360 PRINT "THIS WILL START YOUR LINE NUMBERING"
4370 PRINT "WITH LINE 100 AND EACH NEW LINE"
4380 PRINT "WILL BE INCREMENTED BY 5"
4390 PRINT : PRINT "N100": PRINT
4400 PRINT "THIS WILL BEGIN YOUR LINE NUMBERING"
4410 PRINT "LINE 100 AND WILL INCREMENT EACH"
4420 PRINT "NEW LINE NUMBER BY 10"
4430 PRINT "PRESS ANY KEY TO CONTINUE"
4440 GET A$
4450 HOME
4460 PRINT "N,10": PRINT
4470 PRINT "THIS WILL FAIL WITHOUT A 'START' PARM."
4480 PRINT : PRINT "N": PRINT
4490 PRINT "THIS IS THE DEFAULT USAGE OF AUTO-LINE"
4500 PRINT "THE INCREMENT DEFAULTS TO 10 AND"
4510 PRINT "THE STARTING LINE NUMBER WILL BE"
4520 PRINT "THE NEXT LINE NUMBER IN YOUR PROGRAM."
4530 PRINT "IF THERE IS NO LINE NUMBERS THE"
4540 PRINT "FIRST LINE NUMBER WILL BE 10"
4550 PRINT
4560 PRINT "TO GET OUT OF AUTO-LINE MODE ENTER C/R"
4570 PRINT "NO SPACES ARE ALLOWED BETWEEN 'N' AND"
4580 PRINT "THE LINE NUMBERS."
4590 PRINT "C/R = CARRIAGE RETURN"
4600 PRINT : PRINT "PRESS ANY KEY TO CONTINUE..C/R TO END"
4610 GET A$: IF A$ = CHR$(13) THEN END
4620 RETURN
4630 HOME
4640 PRINT "RENUMBER"
4650 PRINT
4660 PRINT "THE 'R' COMMAND IS FOR RENUMBERING APPLESOFT PROGRAMS."
4670 PRINT : PRINT "R'START','END','INCR','NEW'
4680 PRINT : PRINT "START = STARTING RANGE OF LINE NUMBERS TO BE RENUMBERED"
4690 PRINT "END = ENDING RANGE OF LINE NUMBERS TO BR RENUMBERED"
4700 PRINT "INCR = THE AMOUNT TO INCREMENT EACH NEW LINE NUMBER"
4710 PRINT "NEW = THE FIRST NEW LINE NUMBER"
4720 PRINT "DEFAULT:ALL
4730 PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
4740 GET A$
4750 IF A$ = "" THEN END
4760 HOME
4770 PRINT : PRINT "R": PRINT
4780 PRINT "THIS EXAMPLE WILL RENUMBER YOUR WHOLE PROGRAM STARTING WITH"
4790 PRINT "THE FIRST NEW LINE NUMBER BEING 10 AND EACH NEW LINE"
4800 PRINT "NUMBER BEING INCREMENTED BY 10"
4810 PRINT : PRINT "R,,,100": PRINT
4820 PRINT "THIS WILL RENUMBER YOUR ENTIRE PROGRAM WITH NEW STARTING LINE"
4830 PRINT "NUMBER BEING 100 END EACH NEW LINE NUMBER INCREMENTED BY 10"
4840 PRINT : PRINT "R,,5": PRINT
4850 PRINT "THIS WILL RENUMBER YOUR ENTIRE PROGRAM BEGINNING WITH LINE 10"
4860 PRINT "AND EACH NEW LINE NUMBER INCREMENTED BY 5"
4870 PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
4880 GET A$
4890 IF A$ = "" THEN END
4900 HOME
4910 PRINT : PRINT "R,500": PRINT
4920 PRINT "THIS WILL RENUMBER YOUR PROGRAM UP TO LINE 500 ONLY"
4930 PRINT : PRINT "R500": PRINT
4940 PRINT "THIS WILL RENUMBER YOUR PROGRAM FROM LINE 500 TO THE END"
4950 PRINT : PRINT "R100,200,20,5000"
4960 PRINT "THIS WILL RENUMBER LINES 100 THRU 200 WITH THE FIRST NEW"
4970 PRINT "LINE NUMBER BEING 5000 AND INCREMENTING EACH NEW LINE BY 20"
4980 PRINT : PRINT "IF THE MESSAGE 'PROGRAM DESTROYED'"
4990 PRINT "APPEARS DURING A RENUMBER OPERATION"
5000 PRINT "IT MEANS THAT YOUR PROGRAM HAS GROWN"
5010 PRINT "TOO LARGE DURING A RENUM AND THAT THE"
5020 PRINT "RENUMBER WAS STOPPED."
5030 PRINT "PRESS ANY KEY TO CONTINUE..C/R TO END"
5040 GET A$
5050 HOME
5060 IF A$ = "" THEN END
5070 PRINT "IF THIS HAPPENS YOU SHOULD LOAD IN THE"
5080 PRINT "BACKUP COPY OF YOUR PROGRAM AND"
5090 PRINT "BREAK IT UP INTO TWO PARTS."
5100 PRINT "RENUMBER BOTH PARTS WITH PROPER "
5110 PRINT "SEQUENCE ON BOTH AND THEN APPEND"
5120 PRINT "THEM TOGETHER."
5130 PRINT "PRESS ANY KEY TO CONTINUE..C/R TO END"
5140 GET A$
5150 IF A$ = "" THEN END
5160 RETURN
5170 PRINT "BIG APPEND": PRINT
5180 PRINT "IF YOUR APPLESOFT PROGRAM BECOMES TO"
5190 PRINT "LARGE TO FIT IN MEMORY WITH C.R.A.E."
5200 PRINT "THEN YOU MAY HAVE TO BREAK IT UP"
5210 PRINT "INTO TWO PARTS AND SAVE EACH PART"
5220 PRINT "ON THE DISK. THERE IS A SEPERATE APPEND"
5230 PRINT "FUNCTION INCLUDED ON THE DISK CALLED"
5240 PRINT "'BIG APPEND'. THIS APPEND IS A STAND-"
5250 PRINT "ALONE APPEND FUNCTION THAT IS TO BE
5260 PRINT "USED TO APPEND YOUR PROGRAM TOGETHER."
5270 PRINT "TO USE BIG APPEND FIRST STORE BOTH"
5280 PRINT "PARTS OF YOUR PROGRAM ON DISK"
5290 PRINT "WHEN YOU ARE THRU EDITING THEM."
5300 PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
5310 GET A$
5320 IF A$ = "" THEN END
5330 HOME
5340 PRINT "THEN DO THE FOLLOWING;"
5350 PRINT " 1.BRUN BIG APPEND"
5360 PRINT " 2.LOAD PART 'A'"
5370 PRINT " 3.CALL 38159"
5380 PRINT " 4.ENTER LOAD PART 'B'"
5390 PRINT "AND YOUR PROGRAM WILL BE COMPLETE"
5400 PRINT "IF YOU STILL GET THE MESSAGE"
5410 PRINT " 'PROGRAM TOO LARGE' THEN YOUR"
5420 PRINT "APPLESOFT PROGRAM IS PROBABLY"
5430 PRINT "TOO LARGE FOR MEMORY."
5440 PRINT "PRESS ANY KEY TO CONTINUE...C/R TO END"
5450 GET A$
5460 IF A$ = "" THEN END
5470 RETURN

Text found in 099b_S-C_MicroCompiler_1.0.dsk/EDIT.LOAD.bas:

63000 TEXT : HOME
63010 PRINT TAB( 13)"C. R. A. E. 1"
63030 PRINT
63050 PRINT "COPYRIGHTED:HIGHLANDS COMPUTER SERVICES"
63060 PRINT : PRINT TAB( 16)"COMMANDS"
63070 PRINT
63080 PRINT TAB( 9)"1. APPEND 6. QUOTE"
63090 PRINT TAB( 9)"2. CHANGE 7. VERIFY OFF"
63100 PRINT TAB( 9)"3. DUMP 8. AUTOLINE"
63110 PRINT TAB( 9)"4. FIND 9. RENUMBER"
63120 PRINT TAB( 9)"5. LIST"
63130 PRINT
63140 PRINT CHR$(4);"BLOADEDIT.PROD"
63150 PRINT "C.R.A.E. 1 NOW LOADED(6.7K)"
63160 POKE 1013,76
63170 POKE 1014,00
63180 POKE 1015,141: REM $8D00
63190 POKE 111,240: REM $F0
63200 POKE 115,240: REM $F0
63210 POKE 112,123: REM $7B
63220 POKE 116,123: REM $7B
63230 PRINT
63240 PRINT "USE & OR CALL 36096"
63250 PRINT "DO YOU WANT INSTRUCTIONS? (Y/N)"
63260 INPUT ANS$
63270 IF ANS$ = "Y" THEN PRINT CHR$(4);"RUN DOCUMENTATION"
63280 END

Text found in 099b_S-C_MicroCompiler_1.0.dsk/EDITOR.bas:

5 TEXT : HOME
10 VTAB (10)
20 PRINT TAB( 16)"C. R. A. E."
30 PRINT CHR$(4);"RUN EDIT.LOAD"
40 END

Text found in 099b_S-C_MicroCompiler_1.0.dsk/GENERAL ML LOADER.int:

Listing error: possible embedded machine code.

Text found in 099b_S-C_MicroCompiler_1.0.dsk/HELLO.bas:

10 TEXT : HOME : PRINT "S-C MACRO ASSEMBLER VERSION 1.0": PRINT "---------------------------------------": PRINT "COPYRIGHT (C) 1982"
15 PRINT "---------------------------------------": PRINT "S-C SOFTWARE CORPORATION"
20 PRINT "P. O. BOX 280300": PRINT "DALLAS, TX 75228 (214) 324-2050"
30 PRINT "BLOAD S-C.ASM.MACRO": CALL 4096

Text found in 099b_S-C_MicroCompiler_1.0.dsk/LCASM.int:

Listing error: possible embedded machine code.

Text found in 099b_S-C_MicroCompiler_1.0.dsk/LOAD LCASM.txt:

REM LOAD S-C MACRO ASSEMBLER
REM INTO THE LANGUAGE CARD
CALL-151
C081 C081
BLOAD S-C.ASM.MACRO.LC
300:A9 4C CD 00 E0 F0 12 8D 00 E0 A9 00 8D 01 E0 A9 D0 8D 02 E0 A9 CB 8D D1 03 60
300G
F800

Text found in 099b_S-C_MicroCompiler_1.0.dsk/MACRO LIBRARY.int:

Listing error: possible embedded machine code.

Text found in 099b_S-C_MicroCompiler_1.0.dsk/SAMPLE PRINTER DRIVER.int:

Listing error: possible embedded machine code.

Text found in 099b_S-C_MicroCompiler_1.0.dsk/SEARCH BINARY STRING.int:

Listing error: possible embedded machine code.

Text found in 099b_S-C_MicroCompiler_1.0.dsk/SUPROD.int:

Listing error: possible embedded machine code.

Text found in 099b_S-C_MicroCompiler_1.0.dsk/SWEET-16.int:

Listing error: possible embedded machine code.